Solved exercises🧮 Solve my exercise

BAC 2020 S2 — Physics-Chemistry, exercise 4 : Series RLC circuit (official exam paper, solved)

PhysicsLevel : High schoolElectricity🌐 Lire en français
Statement
A group of students aims to experimentally determine certain characteristics of a $(R,L,C)$ dipole, then deduce the average power consumed as well as the quality factor. To do this, they connect in series a resistor of resistance $R_0=10\ \Omega$, a coil of inductance $L=0,1\ \mathrm{H}$ and resistance $r$, and a capacitor of capacitance $C$. Then they apply across the terminals of the dipole an alternating voltage $u(t)=U_m\sin(2\pi Nt)$ of adjustable frequency $N$. 4.1 The group simultaneously displays, using a two-channel oscilloscope, the two voltages $u_{R_0}(t)$ and $u(t)$ respectively across the resistor $R_0$ and across the dipole $(R,L,C)$ (Figure 1). They obtain Figure 2 below, which reproduces the displayed waveforms. The vertical and horizontal sensitivities are indicated in Figure 2 and are respectively $2\ \mathrm{V/division}$ and $\dfrac{5}{6}\ \mathrm{ms/division}$. Figure 1: diagram of a series circuit including, on the upper branch from left to right, a resistor $R_0$, a coil labeled $L,r$, then a capacitor $C$; an alternating voltage generator is placed on the lower branch. The current $i(t)$ flows in the circuit. The voltage $u(t)$ is indicated across the dipole $(R,L,C)$. Figure 2: oscilloscope trace on a graduated grid, vertical axis labeled “Voltage (V)” and horizontal axis $t\ (\mathrm{s})$. Two sinusoids of the same period are shown. Curve (a), with larger amplitude, has an amplitude of 4 divisions, i.e. $8\ \mathrm{V}$, and a period of 6 divisions, i.e. $5\ \mathrm{ms}$. Curve (b), with smaller amplitude, has an amplitude of 1 division, i.e. $2\ \mathrm{V}$, and the same period. Curve (b) is delayed by about 1 division relative to curve (a), i.e. a time shift of about $\dfrac{5}{6}\ \mathrm{ms}$. 4.1.1 Show that curve (a) represents the variation of the voltage across the dipole $(R,L,C)$. (0,25 point) 4.1.2 Reproduce the circuit diagram indicating the connections to be made to display the voltages on the two-channel oscilloscope. (0,5 point) 4.2 From the oscillograms determine: 4.2.1 the frequency $N$ of the voltage $u(t)$ applied across the series dipole $(R,L,C)$. (0,25 point) 4.2.2 the maximum value $I_m$ of the current delivered in the circuit, then deduce the impedance $Z$ of the dipole $(R,L,C)$. (0,5 point) 4.2.3 the phase shift of the current $i(t)$ relative to the voltage $u(t)$ and deduce the expression for $i(t)$. Is the circuit inductive or capacitive? Justify. (0,75 point) 4.3 From the previous results, determine: 4.3.1 the resistance $r$ of the coil, (0,25 point) 4.3.2 the capacitance $C$ of the capacitor, (0,25 point) 4.3.3 the average power consumed by the dipole $(R,L,C)$. (0,25 point) 4.4 The group of students now adjusts the frequency of the generator to the value $N_0$, the resonant frequency of the dipole $(R,L,C)$, determine: 4.4.1 the frequency $N_0$. (0,25 point) 4.4.2 the maximum current intensity. (0,25 point) 4.4.3 the quality factor $Q$. Conclude. (0,5 point) NB: Figure 2 above does not need to be submitted with the answer sheet.
Strategy
Use the oscilloscope sensitivities to read amplitudes, period and time shift. Since $u_{R_0}(t)=R_0 i(t)$, the voltage across $R_0$ is in phase with the current. Then use the impedance of a series RLC circuit: $Z=\sqrt{(R_0+r)^2+(L\omega-1/(C\omega))^2}$ and $\cos\varphi=(R_0+r)/Z$.
Step-by-step solution
1. Identification of curve (a)
Curve (a) has amplitude $4\times 2=8\ \mathrm{V}$, whereas curve (b) has amplitude $1\times 2=2\ \mathrm{V}$. If curve (a) were $u_{R_0}$, then $I_m=8/10=0.8\ \mathrm{A}$ and the total impedance would be $2/0.8=2.5\ \Omega$, which is impossible because the total resistance is at least $R_0=10\ \Omega$. Therefore curve (a) is the applied voltage $u(t)$ across the dipole, and curve (b) is $u_{R_0}(t)$.
… and 10 more step(s) in the full solution.
🔒 Full solution reserved

Free account: one full past-paper solution per week. Pro: every step-by-step solution, verified by computation, plus timed mock exams.

🔓 Read the full solution
Key concepts
Oscilloscope sensitivitySeries RLC impedancePhase shift from time delayResonance in a series RLC circuitQuality factor

Have a similar exercise? Get it solved step by step, for free.

🧮 Solve my exercise