BAC 2021 S1-S1A-S3 — Physics-Chemistry, exercise 2 : Chemical kinetics: production of dihydrogen (official exam paper, solved)
Statement
Dihydrogen is considered a fuel with high non-polluting energy. It can be synthesized in the laboratory by the action of acids on certain metals.
The aim of this exercise is to monitor the action of sulfuric acid on zinc by measuring pressure.
Data:
- All gases are considered ideal;
- All measurements were made at the temperature $t=25^\circ C$;
- Recall the equation of state of ideal gases: $P.V=nRT$ where $P$ is the gas pressure, $V$ its volume, $n$ the amount of substance and $T$ the absolute temperature, and $R=8,31$ (SI);
- The atomic molar mass of zinc: $M(Zn)=65,4\ g.mol^{-1}$.
We model the reaction of zinc $(Zn)$ with a sulfuric acid solution $(2H_3O^+ + SO_4^{2-})$ by the following chemical equation:
$Zn+2H_3O^+ \rightarrow Zn^{2+}+H_2+2H_2O$
To study the kinetics of this reaction, zinc powder of mass $m=0,6\ g$ is introduced into a flask of constant volume $V=1\ L$. At time $t_0=0$, a volume $V_a=75\ mL$ of the aqueous sulfuric acid solution with hydronium ion molar concentration $[H_3O^+]=0,4\ mol.L^{-1}$ is poured in.
Using a pressure sensor, the pressure $P$ inside the flask is measured at each time $t$.
2.1- Let $n_i(H_3O^+)$ and $n_i(Zn)$ be the initial amounts of substance respectively of the hydronium ions $(H_3O^+)$ and zinc $(Zn)$. Calculate $n_i(H_3O^+)$ and $n_i(Zn)$. (0,5 pt)
2.2- Determine the limiting reactant and deduce the maximum amount of substance $x_{max}$ of dihydrogen produced by the reaction. (0,5 pt)
2.3- By applying the ideal gas law, establish the expression for the amount of substance $x(t)$ of dihydrogen produced by the reaction at time $t$ in terms of $R$, $T$, $V$ and $\Delta P$, where $\Delta P=P-P_0$, with $P_0$ the initial pressure measured at time $t_0=0$ and $P$ the pressure measured at time $t$. (0,5 pt)
2.4- Let $\Delta P_{max}=P_{max}-P_0$ be the maximum pressure change and $P_{max}$ the maximum measured pressure. Establish the relation: $x(t)=x_{max}\dfrac{\Delta P}{\Delta P_{max}}$. (0,25 pt)
2.5- An experimental study made it possible to plot the curve in the figure opposite, showing the variations of $\Delta P$ as a function of time.
Description of the figure: Cartesian graph giving $\Delta P$ in hPa on the vertical axis and $t$ in min on the horizontal axis. The vertical axis is marked from 0 to about 800 hPa with main marks 0, 200, 400 and 600. The horizontal axis is marked from 0 to about 280 min with marks 50, 100, 150, 200 and 250. The curve starts at the origin, increases rapidly, then levels off to a plateau near $700$ to $750\ hPa$ from about $150\ min$ onward.
2.5.1-Find graphically the value of the half-reaction time $t_{1/2}$. (0,5 pt)
2.5.2-Determine the average rate of appearance of dihydrogen between $t=0$ and $t=100\ min$. (0,75pt)
Strategy
Use stoichiometry for the initial amounts and limiting reactant. Then use the ideal gas law applied to the extra gas formed, $H_2$, so that the pressure increase is proportional to the amount of dihydrogen produced. Finally, read the required pressure values graphically.
Step-by-step solution
1. Initial amounts of reactants
For hydronium ions: $$n_i(H_3O^+)=[H_3O^+]V_a=0.40\times 0.075=0.0300\ \mathrm{mol}.$$ For zinc: $$n_i(Zn)=\frac{m}{M}=\frac{0.600}{65.4}=9.17\times 10^{-3}\ \mathrm{mol}.$$
… and 5 more step(s) in the full solution.
🔒 Full solution reserved
Free account: one full past-paper solution per week. Pro: every step-by-step solution, verified by computation, plus timed mock exams.
🔓 Read the full solutionKey concepts
StoichiometryLimiting reactantIdeal gas lawReaction advancementHalf-reaction timeAverage rate of formation
Have a similar exercise? Get it solved step by step, for free.
🧮 Solve my exercise