Solved exercises🧮 Solve my exercise

BAC 2021 S2 — Physics-Chemistry, exercise 4 : Electricity (official exam paper, solved)

PhysicsLevel : High schoolElectricity✔ Verified by computer algebra (5/5)🌐 Lire en français
Statement
A group of students carried out, under the supervision of their teacher, the electric circuit shown in Figure 1, which includes: - A low-frequency generator (GBF) delivering a sinusoidal voltage with instantaneous value $u_{AM} = u = U_m\cos(2\pi Nt)$; - An ohmic conductor with resistance $R = 20\ \Omega$; - A capacitor with adjustable capacitance (C); - A coil with inductance L and resistance $r = 8,3\ \Omega$; - A voltmeter (V). Figure 1: series circuit. The GBF is connected between points M and A on the lower branch. On the upper branch, from M to A, one encounters successively the ohmic conductor R, point B, the coil denoted $(L,r)$, then the capacitor (C), then point A. The voltmeter is connected in parallel between M and B, that is, across the ohmic conductor. Vertical arrows indicate the reference voltages $Y_B$ at point B and $Y_A$ at point A. 4.1- In a first experiment, the group sets the capacitance of the capacitor to the value $C_1$. Figure 2 shows what is observed on the oscilloscope screen with the indicated settings. N.B.: the scales are the same for the 2 curves. Figure 2: gridded oscilloscope screen showing two sinusoids of the same period. The vertical scale indicated is 2 V per division and the horizontal scale indicated is 1 ms per division. The red curve (1) has an amplitude of about one division and a period of about 5 divisions; it crosses the midline at the left edge of the screen, then reaches a maximum around 1 horizontal division and a minimum around 3 divisions. The blue curve (2) has a larger amplitude, about 2.5 to 3 divisions, the same period, and is ahead in phase relative to curve (1); it shows maxima near the left edge and around 5 divisions, and minima around 2.5 divisions and 7.5 divisions. 4.1.1- Identify, with justification, among curves (1) and (2), the one representing $u_R(t)$. (0,5 pt) 4.1.2- Determine the value of the maximum voltage $U_m$ and that of the frequency N of the GBF. (0,5 pt) 4.1.3- Determine the value of the impedance Z of the circuit and the phase shift of the current intensity $i(t)$ relative to the voltage u. (1 pt) 4.1.4- Write the numerical expression of the instantaneous current intensity $i(t)$ in the electric circuit. (0,5 pt) 4.2- In a second experiment, the group sets the capacitance C of the capacitor to the value $C_2 = 10\ \mu F$, while keeping the same values of N and $U_m$. The voltmeter then indicates the value $U_{BM} = 3V$. 4.2.1- Show that the circuit is in an electrical resonance state. (0,5 pt) 4.2.2- Determine the value of the inductance L and that of the quality factor Q of the circuit. (1 pt)
Strategy
Use the oscilloscope scales to read amplitudes and period. The voltage across the resistor is in phase with the current, so it identifies the current phase. Then use the series RLC impedance relations and, in the second experiment, the resonance condition.
Step-by-step solution
1. Identification of the resistor voltage
The voltage displayed at point B with respect to M is the voltage across the resistor: $u_{BM}=u_R$. Since $u_R=Ri$, it is in phase with the current. On the oscilloscope, curve (1) has the smaller amplitude, about one division, while curve (2) has the larger amplitude and corresponds to the generator voltage $u=u_{AM}$. Therefore curve (1) represents $u_R(t)$.
… and 5 more step(s) in the full solution.
🔒 Full solution reserved

Free account: one full past-paper solution per week. Pro: every step-by-step solution, verified by computation, plus timed mock exams.

🔓 Read the full solution
Key concepts
Series RLC circuitImpedanceOhm’s lawPhase shiftElectrical resonanceQuality factor

Have a similar exercise? Get it solved step by step, for free.

🧮 Solve my exercise