BAC 2024 S1-S1A-S3 — Physics-Chemistry, exercise 4 : RC and RL Circuits (official exam paper, solved)
Statement
Parts A, B and C are independent.
In all parts, we shall denote by $t = 0$ the time at which the switches move to their respective chosen positions.
We consider the electric circuit shown in Figure 3, which includes:
• An ideal voltage generator, with electromotive force $E = 12\ V$.
• A coil of inductance $L$ and internal resistance $r$.
• A capacitor of capacitance $C = 2,0.10^{-7}\ F$.
• Two ohmic conductors with resistances $R_1 = 10\ \Omega$ and $R_2 = 30\ \Omega$.
• Four switches $K_1$, $K_2$, $K_3$ and $K_4$.
Figure 3: the ideal generator $E$ is placed in the left vertical branch with current $i_1$ upward. At the top, switch $K_1$ and resistor $R_1$ are in series; the voltage across $R_1$ is denoted $U_{R1}$. The upper node feeds three parallel vertical branches: one branch with switch $K_2$ then the capacitor $C$ (voltage $U_C$, current $i_2$ downward), one branch with switch $K_3$ then the coil $(L,r)$ (voltage $U_b$, current $i_4$ downward, current $i_3$ indicated on the upper conductor), and one branch with switch $K_4$ then resistor $R_2$ (current $i_5$ on the upper conductor). The bottoms of the branches are connected to the common lower conductor.
4.1- Part A: $K_1$ and $K_2$ are closed, $K_3$ and $K_4$ are open.
4.1.1- Establish the differential equation for the voltage $u_c$ across the capacitor. (0,5pt)
4.1.2- Give the value of the voltage $u_c$ in steady state. (0,25pt)
4.1.3- Determine the time expression $u_c(t)$ assuming that the capacitor is initially uncharged. (0,25pt)
4.1.4- Determine the time required for the voltage $u_c$ to go from 5% to 95% of its maximum value. (0,25pt)
4.2- Part B: $K_1$ and $K_3$ are closed, $K_2$ and $K_4$ are open.
4.2.1- Establish the differential equation for the voltage $u_b$ across the coil. (0,5pt)
4.2.2- Show that at time $t=0\ s$, $u_b(0) = E$. (0,25pt)
4.2.3- The expression for the voltage $u_b(t)$ across the coil is: $u_b(t) = A_1 + B_1e^{-\frac{t}{\tau_1}}$ with $\tau_1 = \frac{L}{R_1+r}$. Using the initial conditions and steady state, express the constants $A_1$ and $B_1$ in terms of $E$ and $R_1$. (0,5pt)
4.2.4- Figure 4 shows the evolution of the voltage $u_b(t)$ as a function of time. Let (T) be the tangent line to the curve $u_b(t)$ at time $t = 0$. Show that the equation of the tangent (T) is: $u_T(t) = -\frac{R_1E}{L}t + E$. (0,25pt)
Figure 4: graph of $u_b(t)$ as a function of time $t$. The curve is a decreasing exponential of the exponential type, starting from a high initial value denoted $E$ at $t=0$, then tending toward a positive horizontal asymptote. The tangent line (T) at the origin intersects the time axis at $t_1$. Point $M$ is located on the curve at abscissa $t_0$ and on the horizontal asymptote.
4.2.5- Let $t_1$ be the abscissa of the intersection point of the tangent (T) with the time axis and $t_0$ the abscissa of point $M$ of intersection of the tangent (T) with the horizontal asymptote to the curve.
4.2.5.1- Show that: $\frac{t_0}{t_1} = \frac{R_1}{R_1+r}$. Calculate the value of $r$ if $t_0 = 1,0\ ms$ and $t_1 = 1,2\ ms$. (0,5pt)
4.2.5.2- Determine the inductance $L$ of the coil. (0,25pt)
4.3- Part C: $K_1$, $K_3$ and $K_4$ are closed, $K_2$ is open.
4.3.1- Establish the expression for the current $i_5$ in terms of $i_1$ and $i_4$ and then that of the current $i_1$ in terms of $E$, $R_1$, $R_2$ and $i_4$. (0,5pt)
4.3.2- Show that the differential equation governing the current $i_4$ is written: $\frac{di_4}{dt} + \left(\frac{R_1r + R_2r + R_1R_2}{L(R_1+R_2)}\right)i_4 = \frac{R_2E}{L(R_1+R_2)}$. (0,5pt)
4.3.3- Verify that $i_4(t) = A_2 + B_2e^{-\frac{t}{\tau_2}}$ is a solution of the differential equation, where $A_2$, $B_2$ and $\tau_2$ are constants to be expressed in terms of $R_1$, $R_2$, $E$, $r$ and $L$. (0,75pt)
Strategy
Use Kirchhoff's laws, capacitor law i = C du_c/dt, coil law u_b = r i + L di/dt, and current splitting at a node. Each part is treated independently.
Step-by-step solution
1. Part A: differential equation for the capacitor voltage
With K1 and K2 closed, the generator, R1 and the capacitor are in series. Kirchhoff's voltage law gives E = u_R1 + u_c. Since u_R1 = R1 i and i = C du_c/dt, we obtain R1 C du_c/dt + u_c = E.
… and 12 more step(s) in the full solution.
🔒 Full solution reserved
Free account: one full past-paper solution per week. Pro: every step-by-step solution, verified by computation, plus timed mock exams.
🔓 Read the full solutionKey concepts
Kirchhoff's voltage lawKirchhoff's current lawCapacitor chargingRL transient responseInductor current continuityFirst-order linear differential equationTime constant
Have a similar exercise? Get it solved step by step, for free.
🧮 Solve my exercise