BAC 2024 S2-S2A-S4-S5 — Physics-Chemistry, exercise 4 : RLC Circuit in Sinusoidal Steady-State (official exam paper, solved)
Statement
A coil opposes variations in the intensity of the current. A capacitor filters signal frequencies to improve the quality of their transmission in an electrical system. They are generally associated with a resistor to form an RLC circuit, which can produce, among other things, a resonance phenomenon found in the operation of radios and televisions.
During a practical work session, a technician connects in series a generator delivering a sinusoidal alternating voltage of frequency N, with maximum value $U_m$ and expression $u(t)=U_m\cos(2\pi Nt)$, a resistor of resistance $R=16\ \Omega$, a coil of inductance L and negligible resistance, a capacitor of capacitance C, and an ammeter (figure 3).
[Figure 3: closed series circuit comprising, on the upper branch from left to right, a resistor $R$, a capacitor $C$, and a coil $L$; on the lower branch, an ammeter $A$ and a generator $G$.]
A dual-trace oscilloscope makes it possible to display the voltages $u(t)$ across the generator and $u_L(t)$ across the coil when the circuit is closed (figure 4). We are given $u_L(t)=U_{Lm}\cos(2\pi Nt+\varphi_{u_L/u})$ where $U_{Lm}$ is the maximum voltage across the coil and $\varphi_{u_L/u}$ the phase shift of the voltage across the coil $u_L$ relative to that of the generator $u$.
4.1- Reproduce figure 3 on your paper and specify the oscilloscope connections needed to display u and $u_L$. (0,5 pt)
4.2- Consider the oscillograms shown in figure 4.
The time base is given as: 2,5 ms/div and vertical sensitivity: 2 V/div.
[Figure 4: oscillogram on a grid with two sinusoids labeled $C_1$ and $C_2$. The horizontal scale indicated is 2,5 ms per division and the vertical scale is 2 V per division. The two curves have the same period, about 4 divisions. Curve $C_2$ has a larger amplitude, about 3 divisions, and its maxima occur about 1 division before those of $C_1$. Curve $C_1$ has an amplitude of about 1,5 division.]
4.2.1- identify $u_L(t)$ knowing that the voltage $u_L(t)$ is leading in phase relative to $u(t)$. (0,5 pt)
4.2.2- Determine:
- the maximum voltages $U_m$ across the generator and $U_{Lm}$ across the coil;
- the frequency N of the voltage $u(t)$ delivered by the generator;
- the phase $(\varphi_{u_L/u})$ of the voltage $u_L(t)$ relative to the voltage $u(t)$. (01pt)
4.3- the expression of the voltage across the generator is $u(t)=U_m\cos(2\pi Nt)$ and that across the coil is: $u_L(t)=U_{Lm}\cos(2\pi Nt+\varphi_{u_L/u})$.
4.3.1- Write the numerical time equations of the voltages $u(t)$ and $u_L(t)$. (0,5pt)
4.3.2- Determine the phase $(\varphi_{i/u})$ of the current intensity $i(t)$ relative to the voltage $u(t)$ across the generator, knowing that $\varphi_{i/u}=\varphi_{i/u_L}+\varphi_{u_L/u}$. (0,25pt)
4.3.3- Justify that the circuit is at current resonance. (0,25pt)
4.4- Determine: (0,25pt)
✓ the value of the current intensity measured by the ammeter;
✓ the value of the inductance L; (01pt)
✓ the capacitance C;
✓ the bandwidth in frequency $\Delta N$.
Strategy
Use the oscilloscope scales to read amplitudes, period and phase shift. Since the coil voltage leads the current by π/2 and the observed coil voltage leads the generator voltage by π/2, the current is in phase with the generator voltage, which characterizes series current resonance. Then use resonance formulas for a series RLC circuit.
Step-by-step solution
1. Oscilloscope connections
To display $u(t)$, connect one oscilloscope channel across the generator terminals. To display $u_L(t)$, connect the second channel across the coil terminals. The reference/ground terminals must be connected to the same circuit node to avoid a short circuit.
… and 11 more step(s) in the full solution.
🔒 Full solution reserved
Free account: one full past-paper solution per week. Pro: every step-by-step solution, verified by computation, plus timed mock exams.
🔓 Read the full solutionKey concepts
Oscilloscope sensitivityPhase shiftSeries RLC circuitCurrent resonanceRMS valueBandwidth
Have a similar exercise? Get it solved step by step, for free.
🧮 Solve my exercise