BAC 2026 S2 — Physics-Chemistry, exercise 3 : RL Circuit (mock exam, solved)
Statement
SITUATION 3 :
Targeted skills:
- Analyze an RL circuit subjected to a variable voltage.
- Use experimental measurements (oscilloscope) to justify observations.
- Calculate a physical quantity (inductance, energy) and interpret its role in a real situation.
Context:
In mobile phone repair workshops in Sandaga (Dakar), technicians use coils and resistors to test the stability of power supplies. Bathie, a final-year science student and electronics enthusiast, observes triangular signals on the oscilloscope applied to an RL circuit. He notices that the voltage across the coil does not look like that of the generator. Intrigued, he seeks to understand this phenomenon, determine the characteristics of the coil, and relate this to a real-life situation: why his phone charger sometimes heats up when it is plugged in for a long time.
Resources:
- Experimental setup: series circuit consisting of a resistor $R=1000\ \Omega$ and a coil of inductance $L$, powered by a triangular signal generator.
- Oscilloscope:
* Channel 1: voltage $u_{CB}$ across the coil (sensitivity 20 mV/div).
* Channel 2: voltage $u_{AB}$ across the resistor (sensitivity 2 V/div).
* Time base: $10^{-3}\ \mathrm{s/div}$.
- Figures 1 and 2: diagram of the setup and observed trace.
Figure 1: the generator feeds in series a resistor $R$ placed between points $A$ and $B$, then a coil of inductance $L$ placed between $B$ and $C$. The current $i$ flows from $A$ to $B$ then to $C$. The oscilloscope is connected with a common ground at point $B$; channel 2 measures $u_{AB}$ across the resistor and channel 1 measures $u_{CB}$ across the coil.
Figure 2: gridded oscilloscope screen. Channel 2 shows a periodic triangular voltage occupying the upper part of the screen, with successive peaks reaching about the upper horizontal grid line and troughs located about three divisions lower; the rises and falls are straight and of regular duration. Channel 1 shows a square-wave voltage occupying the lower part of the screen, alternating between two horizontal levels separated by about one division, with the level changes coinciding with the slope changes of the triangular signal.
- Relation between the voltages: $u_{CB}=-\dfrac{L}{R}\dfrac{du_{AB}}{dt}$.
Instructions:
Instruction 1: Analysis of the observed signal
1.1. Specify the voltages displayed on oscilloscope channels 1 and 2.
1.2. Express the voltages $u_{AB}$ and $u_{CB}$ in terms of $R$, $i$ and $L\dfrac{di}{dt}$. Deduce the expression of $u_{CB}$ in terms of $R$, $L$ and $\dfrac{du_{AB}}{dt}$.
1.3. Justify why the voltage $u_{CB}$ appears as a square wave while the generator voltage is triangular.
Instruction 2: Determination of the inductance
2.1. Assuming that channel 2 represents the voltage across the resistor, determine graphically the maximum voltage across the resistor.
2.2. Using the oscilloscope data, determine the inductance of the coil.
Instruction 3: Student’s real-life application
3.1. Give the expression for the stored energy.
3.2. Calculate the maximum energy $E_M$ stored in the coil.
3.3. Explain how this energy storage can be related to the heating of phone chargers.
Strategy
Use Ohm's law for the resistor and the inductor voltage law. Since the resistor voltage is proportional to the current, the coil voltage is proportional to the derivative of the resistor voltage. Then read amplitudes and time intervals from the oscilloscope grid to compute the slope and the inductance.
Step-by-step solution
1. Voltages displayed by the oscilloscope
The common ground of the oscilloscope is at point B. Therefore channel 1 measures the voltage between C and B, so channel 1 displays $u_{CB}$. Channel 2 measures the voltage between A and B, so channel 2 displays $u_{AB}$.
… and 7 more step(s) in the full solution.
🔒 Full solution reserved
Free account: one full past-paper solution per week. Pro: every step-by-step solution, verified by computation, plus timed mock exams.
🔓 Read the full solutionKey concepts
Ohm's lawInductor voltage lawDerivative of a triangular signalOscilloscope sensitivityMagnetic energy in an inductorJoule and magnetic losses
Have a similar exercise? Get it solved step by step, for free.
🧮 Solve my exercise