Solved exercises🧮 Solve my exercise

Baccalauréat 2021 — Physics-Chemistry specialty, Amérique du Nord (jour 1) remplacement — exercise 1 : A Traditional Sport: Straw Sheaf Throwing (official exam paper)

PhysicsLevel : High schoolA Traditional Sport: Straw Sheaf Throwing🌐 Lire en français
Statement
Straw sheaf throwing is a sporting activity, originating in the agricultural world, that is now practiced in competition. The aim of the game is to throw, using a fork, a sheaf of straw, treated as a rectangular prism of length 0,60 m, width 0,40 m and thickness 0,40 m, over a horizontal bar placed at a very specific height. Photograph: a sheaf of straw is thrown over a horizontal bar held between two posts; a thrower standing on the ground uses a fork. A. Study of the throw The competitive situation is modeled as follows. Diagram: coordinate system $(O,x,y)$ with $x$ horizontal to the right and $y$ vertical upward. The initial point $M_0$ is located vertically above $O$ at height $H$. The initial velocity vector $\vec v_0$ starts from $M_0$ and is inclined at an angle $\alpha$ with respect to the horizontal; its horizontal component is to the right. The gravitational field vector $\vec g$ is vertical downward. A horizontal bar is located to the right, at a horizontal distance $D$ from $O$. The length scales are not respected in the diagram. • The straw sheaf of mass $m = 7{,}257\ \mathrm{kg}$ is treated as a material point M, corresponding to its center of mass. • At the initial instant, M is at the point $M_0$ such that $OM_0 = H = 2{,}80\ \mathrm{m}$. • The thrower is at a distance $D = 2{,}0\ \mathrm{m}$ from the base of the supports of the horizontal bar. • The study begins at $t = 0$ when the straw sheaf has just left the fork (at point $M_0$) with an initial velocity represented by the velocity vector $\vec v_0$ inclined at an angle $\alpha = 80^\circ$ with respect to the horizontal. The value of the initial speed is $v_0 = 9{,}0\ \mathrm{m\cdot s^{-1}}$. • The trajectory of M is assumed to lie in the xOy plane. • The horizontal bar is at a height of 4,50 m above the ground. • Air resistance is neglected. • The gravitational field, assumed uniform, is $g = 9{,}8\ \mathrm{m\cdot s^{-2}}$. The motion of M is studied in the terrestrial frame whose xOy coordinate system is defined in the introductory diagram. A.1. Use Newton’s second law to determine the coordinates $a_x(t)$ and $a_y(t)$ of the acceleration vector of M. A.2. Show that the equations of motion of M can be written in the form: $x(t) = v_0\cdot t\cdot \cos\alpha$ $y(t) = -\dfrac{1}{2}\,g\cdot t^2 + v_0\cdot t\cdot \sin\alpha + H$ A.3. Deduce the equation of the trajectory $y(x)$ of M. A.4. Using a quantitative analysis, state whether or not the straw sheaf will clear the horizontal bar. We are interested in three particular positions of M on its parabolic trajectory: the initial position $M_0$, the point $M_1$ at the top of the trajectory, and the point $M_2$ at the same height as $M_0$ through which M passes during the descending phase of the motion. Diagram: parabolic trajectory starting from $M_0$, rising to the top point $M_1$, then descending and passing through $M_2$ located at the same height as $M_0$; a dashed horizontal line connects the level of $M_0$ and $M_2$. Gravitational potential energy is taken to be zero at ground level. A.5. Calculate the value of the kinetic energy and that of the gravitational potential energy of the system at $M_0$. A.6. Indicate, with a detailed argument, whether each of the following three statements is true or false when air resistance is neglected. Statement I: mechanical energy is maximum at $M_0$. Statement II: kinetic energy is zero at $M_1$. Statement III: kinetic energy at $M_2$ is less than kinetic energy at $M_0$. In reality, air resistance cannot be neglected. A.7. Indicate, with a detailed argument, whether each of the three statements in question A.6 remains true or false when air resistance is no longer neglected. B. The announcer’s microphone The announcer of the straw sheaf throwing competition uses a microphone connected to a loudspeaker through a power amplifier. The microphone used in the competition is an electroacoustic transducer. It converts an acoustic signal into an electrical signal. Principle diagram of the microphone: a casing contains a movable membrane, separated by air from a fixed plate; an electrical insulator is shown at the top. The fixed plate and the membrane form the plates of a capacitor. A DC voltage source ensures polarization. A load resistor $R$ is connected to the circuit; the weak electrical signal is sent to the preamplifier. The capacitor in the microphone is formed of two plates; the first is a movable plastic membrane coated with a thin metal film, the second is a fixed metal plate. When the microphone is not picking up sound, the distance between the two plates is of the order of 15 to 25 µm. Moreover, for operation, the capacitor must be charged; a DC voltage source is therefore inserted, which has no effect on the output electrical signal sent to the preamplifier. The microphone is then modeled by the following electrical circuit: capacitor of capacitance $C$ between points A and B, voltage $u_C$ oriented upward; ideal voltage source $E$ between A and F, with + terminal on the A side and − terminal on the F side; resistor $R$ between F and D, voltage $u_R$ oriented downward; the output to the preamplifier is taken on the right between nodes F and D. DC voltage delivered by the ideal source: $E = 48\ \mathrm{V}$ Resistance of the load ohmic conductor: $R = 100\times 10^6\ \Omega$ Capacitance of the capacitor: $C$ For operation, the capacitor must remain charged. The charging phase is studied, with the microphone not picking up sound. B.1. Establish the relation between the voltage $E$ across the ideal voltage source, the voltage $u_C(t)$ across the capacitor, and the voltage $u_R(t)$ across the ohmic conductor. B.2. Show that the differential equation satisfied by the voltage $u_C(t)$ during charging is of the form: $E = R\times C\times \dfrac{du_C(t)}{dt} + u_C(t)$. Using an appropriate device, the voltage $u_C(t)$ across the capacitor is measured during charging. The following curve is obtained. Graph titled “Time evolution of the voltage across the capacitor”: vertical axis $u_C$ in V from 0.0 to 50.0 V, major tick marks every 5.0 V; horizontal axis $t$ in s from 0.000 to 0.040 s, major tick marks at 0.010 s. The charging curve rises rapidly from $u_C=0$ at $t=0$, reaches about 30 V near 0.006 s, 36 V near 0.010 s, 43 V near 0.015 s, 45 V near 0.020 s, then tends asymptotically toward 48 V between 0.030 s and 0.040 s. This curve can be modeled by one of the three mathematical functions proposed below: Function 1: $u_C(t) = E\times \left(1 - e^{\frac{t}{R\times C}}\right)$ Function 2: $u_C(t) = E\times e^{-\frac{t}{R\times C}}$ Function 3: $u_C(t) = E\times \left(1 - e^{-\frac{t}{R\times C}}\right)$ B.3. Using the curve, indicate with reasoned argument which function models the charging of the capacitor. B.4. Verify that the chosen function is a solution of the differential equation established in question B.2. The capacitance $C$ of a parallel-plate capacitor made of two metallic plates of area $S$ facing each other, separated by a distance $d$, is given by the relation $C = \varepsilon\cdot \dfrac{S}{d}$ with $\varepsilon$ the permittivity of air between the two plates of the capacitor. For the microphone studied, the product of the permittivity of air and the area is: $\varepsilon\cdot S = 1{,}4\times 10^{-15}\ \mathrm{F\cdot m}$. B.5. Using the curve and making the reasoning explicit, determine the value of the distance $d$ separating the two plates when the microphone is operating but not picking up sound. Under the effect of the sound waves emitted by the announcer, the membrane moves, causing a change in the distance between the two capacitor plates. The output voltage sent to the preamplifier is then an image of the sound waves picked up by the microphone. B.6. Justify with detailed reasoning how the capacitance of the capacitor changes when the distance between the two plates decreases. C. The loudspeaker A source S, emitting sound waves of power $P$, is isotropic if it emits the same amount of energy in all directions. The measured sound intensity, denoted $I$, then depends on the distance $d$ from the source according to the relation: $I = \dfrac{P}{4\pi\cdot d^2}$ with $I$ in $\mathrm{W\cdot m^{-2}}$; $P$ in W and $d$ in m. Diagram: point source S at the center of a dashed circle representing isotropic propagation; the distance $d$ is indicated radially from S to the circle. The sound intensity level, denoted $L$, is related to the sound intensity by the relation: $L = 10\cdot \log\left(\dfrac{I}{I_0}\right)$ with $L$ expressed in dB, $I$ in $\mathrm{W\cdot m^{-2}}$ and $I_0 = 1{,}0\times 10^{-12}\ \mathrm{W\cdot m^{-2}}$. The microphone is connected, through a power amplifier, to a loudspeaker. The sound intensity measured 1.0 m in front of the loudspeaker is: $I_1 = 3{,}2\times 10^{-3}\ \mathrm{W\cdot m^{-2}}$. C.1. Calculate the sound intensity level $L_1$ corresponding to the sound intensity $I_1$. European legislation gives the daily exposure time limits that must not be exceeded at certain sound intensity levels in order not to cause irreversible damage: Table: for $L$ in dB, the exposure time limits are: 86 dB → 2 h/day; 92 dB → 30 min/day; 95 dB → 15 min/day; 101 dB → 4 min/day; 107 dB → 1 min/day. C.2. Comment on the result of question C.1. in light of these daily exposure time limits. C.3. Show that the power $P$ of the loudspeaker is equal to $4{,}0 imes 10^{-2}\ \mathrm{W}$. The organizers of the sporting event, lasting 2 h, have set $2{,}0\times 10^{-4}\ \mathrm{W\cdot m^{-2}}$ as the maximum value of the sound intensity perceived by spectators. C.4. Explain the organizers’ choice of setting $2{,}0\times 10^{-4}\ \mathrm{W\cdot m^{-2}}$ as the maximum value of the sound intensity perceived by spectators. Safety barriers surround the loudspeaker at a distance of 3.0 m from it, to prevent spectators from getting too close. C.5. Indicate, using quantitative reasoning, whether the safety distance between the barriers and the loudspeaker is sufficient to respect the maximum value of $2{,}0\times 10^{-4}\ \mathrm{W\cdot m^{-2}}$ chosen by the organizers.
⏳ Solution not generated yet

Open this statement in Expert Maths AI: the step-by-step solution is computed on demand, checked by a second resolution, then published here for everyone.

📝 See the solution

Have a similar exercise? Get it solved step by step, for free.

🧮 Solve my exercise