Baccalauréat 2021 — Physics-Chemistry specialty, Amérique du Nord (jour 1) remplacement — exercise 2 : Exercise A — Lactic acid and ethyl lactate (official exam paper)
Statement
Key words: functional groups; acid-base pair; kinetic factors; volumetric rate of appearance of a product; standard uncertainty.
Lactic acid, obtained by fermentation of glucose for example, is the basis of many derivatives used in industry, thus providing an alternative to petrochemistry.
One of these derivatives, ethyl lactate, is an ester; it is used as a food additive, a solvent for varnish, a degreaser for metal parts…
Data
Brute formula of lactic acid: $\mathrm{C_3H_6O_3}$
Molar mass of lactic acid: $M = 90{,}0\ \mathrm{g\cdot mol^{-1}}$
Topological formula of lactic acid: molecule $\mathrm{CH_3-CH(OH)-C(=O)-OH}$ ; a methyl group is attached to a carbon bearing a hydroxyl group, itself attached to a carbon with carboxylic acid function.
A. Lactic acid or 2-hydroxypropanoic acid
A.1. Identify and name the functional groups present in the lactic acid molecule.
A.2. Draw the topological formula of the positional isomer of lactic acid.
We wish to measure the $pK_A$ of the lactic acid/lactate ion pair.
The reaction equation modeling the acid-base transformation between lactic acid and water is: $\mathrm{C_3H_6O_3(aq) + H_2O(\ell) \rightleftharpoons C_3H_5O_3^-(aq) + H_3O^+(aq)}$
A.3. Identify the two acid-base pairs involved in this transformation.
A.4. Show that the acidity constant $K_A$ of the lactic acid pair can be expressed as:
$K_A = \dfrac{[\mathrm{H_3O^+}]^2}{(C-[\mathrm{H_3O^+}])\cdot c^\circ}$
with $C$ the concentration of acid initially introduced and $c^\circ = 1\ \mathrm{mol\cdot L^{-1}}$ the standard concentration.
The $pH$ of an aqueous solution of lactic acid is measured, with an acid concentration initially introduced of $C = 8{,}00\times 10^{-3}\ \mathrm{mol\cdot L^{-1}}$. The result is: $pH = 3{,}03$.
A.5. Calculate the amount-of-substance concentration of oxonium ions $\mathrm{H_3O^+(aq)}$ in this solution.
A.6. Justify that lactic acid is not a strong acid.
A.7. Deduce the value of the acidity constant $K_A$ and then the value of $pK_A$.
A series of twelve measurements of the $pH$ of the aqueous solution of lactic acid, with acid concentration initially introduced $C = 8{,}00\times 10^{-3}\ \mathrm{mol\cdot L^{-1}}$, is carried out.
Statistical processing of the results of these measurements leads to a mean value of $pK_A$, denoted $pK_{Am}$, of 3,871667 with a standard uncertainty, denoted $u(pK_A)$, of 0,026935.
A.8. Write, with an appropriate number of significant figures, the measurement result $pK_{Am}$.
The following distribution diagram of the lactic acid pair is constructed using the reference value $pK_{Aref} = 3{,}90$ for the $pK_A$ of the lactic acid pair.
Graph titled “Distribution diagram of the lactic acid pair”: horizontal axis $pH$ from 0 to 9; vertical axis percentage from 0 to 100. Two sigmoid curves intersect around $pH \approx 3{,}9$ and 50 %. The “%Acid” curve (diamonds) is about 100 % from $pH=0$ to 2, then decreases: about 90 % at $pH=3$, 70 % around 3,5, 50 % around 3,9, 20 % around 4,5, 5 % at $pH=5$, then 0 % beyond 6. The “%Base” curve (squares) is complementary: about 0 % up to $pH=2$, 10 % at $pH=3$, 30 % around 3,5, 50 % around 3,9, 80 % around 4,5, 95 % at $pH=5$, then 100 % beyond 6.
A.9. Explain and justify the method for finding the value $pK_{Aref}$ on the distribution diagram.
A.10. Compare, using a calculation, the measured result $pK_{Am}$ with the reference value $pK_{Aref}$.
B. Esterification of lactic acid
Ethyl lactate can be synthesized from lactic acid and ethanol. The associated esterification reaction equation is the following:
$\mathrm{C_3H_6O_3\ (\ell) + C_2H_6O\ (\ell) \rightleftharpoons C_5H_{10}O_3\ (\ell) + H_2O\ (\ell)}$
To study the influence of different parameters on this transformation, two identical chemical systems of the same volume are made to react under different conditions.
Table:
- Experiment (a): initial mixture of 0,741 mol of lactic acid and 0,850 mol of ethanol; procedure: reflux heating at 80 °C.
- Experiment (b): initial mixture of 0,741 mol of lactic acid, 0,850 mol of ethanol and a few drops of concentrated sulfuric acid; procedure: reflux heating at 80 °C.
By a succession of titrations at different times, the time evolution of the transformation can be followed. The following two curves are then obtained.
Graph titled “Amount of ester formed $n_{ester}$ over time”: vertical axis $n_{ester}$ in mol, scaled from 0 to 0,370 mol with main divisions 0,074 ; horizontal axis time in min, from 0 to 450 min. Curve (b), represented by round points, increases rapidly: about 0,12 mol at 10 min, 0,21 mol at 20 min, 0,25 mol at 30 min, 0,30 mol around 60 min, 0,33 mol around 100 min, then reaches a plateau close to 0,36 to 0,37 mol between 200 and 350 min. Curve (a), represented by squares, increases more slowly: about 0,02 mol at 10 min, 0,05 mol around 30 min, 0,09 mol around 60 min, 0,13 mol around 90 min, 0,17 mol around 120 min, 0,19 mol around 150 min, 0,21 mol around 180 min, 0,23 mol around 250 min, 0,24 mol around 300 min, 0,25 mol around 350 min. Source: Adapted from CNRS.
Let $V$ be the volume of the reaction medium, assumed constant.
B.1. Express the volumetric rate $v$ of appearance of the ester.
B.2. By qualitatively analyzing curve (b), indicate how the volumetric rate $v$ of appearance of the ester evolves.
B.3. Identify the role played by sulfuric acid.
B.4. Indicate, with justification, whether for experiment (a) the final state is reached after 350 min.
⏳ Solution not generated yet
Open this statement in Expert Maths AI: the step-by-step solution is computed on demand, checked by a second resolution, then published here for everyone.
📝 See the solutionHave a similar exercise? Get it solved step by step, for free.
🧮 Solve my exercise