Baccalauréat 2021 — Physics-Chemistry specialty, Asie (jour 1) remplacement — exercise 2 : Exercise A: Anti-mite treatment (official exam paper)
Statement
EXERCISE A: ANTI-MITE TREATMENT
Keywords: acid-base pair, spectrophotometric titration, infrared spectroscopy.
The varroa (destructor) is a mite that parasitizes bees and causes the destruction of very many bee colonies around the world.
Using a diffuser containing a solution of methanoic acid makes it possible to eradicate it.
Photograph: a bee is shown with a red mite on its body, indicated by an arrow and labeled “Varroa destructor”. Source https://www.inrae.fr.
This exercise concerns the study of some properties of methanoic acid, then the determination of the methanoic acid concentration in a commercial solution in order to compare it with the indication given by the manufacturer: aqueous solution containing 65.0 g of methanoic acid per 100 mL of solution.
Data:
- Developed formula of methanoic acid: H–C(=O)–O–H.
- Molecular molar mass of methanoic acid: $M = 46.0\ \mathrm{g\,mol^{-1}}$.
- $pK_A$, at 25 °C, of the methanoic acid / methanoate ion pair: 3.8.
- Extract from an infrared spectroscopy table:
Table. Bond; Wavenumber ($\mathrm{cm^{-1}}$); Characteristics of the absorption band.
O–H alcohol; 3200–3700; strong, broad.
O–H carboxylic acid; 2600–3200; strong to medium, broad.
C–H; 2800–3100; strong or medium.
C=O; 1650–1740; strong, sharp.
Properties of methanoic acid
1. State the definition of an acid according to Brønsted’s theory and give the names of two common acids.
2. Give the formula of the methanoate ion, the conjugate base of methanoic acid.
3. Draw the predominance diagram of methanoic acid and its conjugate base. Justify.
4. Among the three infrared spectra A, B and C below, identify the one that could be attributed to methanoic acid. Justify your answer.
Infrared spectra A, B and C. Common description: the vertical axis is transmittance in %, from 0 to 100; the horizontal axis is wavenumber in $\mathrm{cm^{-1}}$, decreasing from about 4000 to about 600. Source of the infrared spectra: http://www.sciences-edu.net.
Spectrum A: very marked broad absorption between about 3600 and 2600 $\mathrm{cm^{-1}}$ with a minimum near 3000 $\mathrm{cm^{-1}}$; strong sharp band around 1700–1750 $\mathrm{cm^{-1}}$; numerous bands in the 1500–600 $\mathrm{cm^{-1}}$ region.
Spectrum B: no very broad O–H band; bands near 2800–2600 $\mathrm{cm^{-1}}$; strong sharp band around 1700–1750 $\mathrm{cm^{-1}}$; several bands near 1450, 1350, 1150 and 600 $\mathrm{cm^{-1}}$.
Spectrum C: broad band around 3400–3000 $\mathrm{cm^{-1}}$; bands near 2900–2800 $\mathrm{cm^{-1}}$; absence of a very intense sharp band near 1700 $\mathrm{cm^{-1}}$; marked bands in the 1400–1000 $\mathrm{cm^{-1}}$ region.
Titration of the methanoic acid contained in the commercial anti-mite treatment solution
A titration of the methanoic acid contained in a commercial anti-mite treatment solution by an aqueous sodium hydroxide solution is carried out using the following protocol.
Titration protocol:
- Dilute the commercial solution 1,000 times.
- Take a volume $V_a = 20.0\ \mathrm{mL}$ of the diluted solution $S_a$ of concentration $C_0$.
- Titrate the sample with an aqueous sodium hydroxide solution ($\mathrm{Na^+(aq)} + \mathrm{HO^-(aq)}$) of concentration $C_b = 2.00 \times 10^{-2}\ \mathrm{mol\,L^{-1}}$. The titration is monitored by pH measurement.
- Use a spreadsheet-graphing program in which the different measured pH values are entered as a function of the volume $V_b$ of sodium hydroxide solution added.
The titration curve $pH = f(V_b)$, as well as the curve $\dfrac{dpH}{dV_b} = g(V_b)$ obtained using the spreadsheet data, are shown in Figure 1.
Figure 1 – Titration monitoring curves for the titration of methanoic acid by sodium hydroxide. Description: graph with $V_b$ on the x-axis in mL from 0 to 35 and pH on the y-axis from 0 to 14. The curve $pH=f(V_b)$ starts at about pH 2.8 at $V_b=0$, increases slowly to about pH 4.5 at 12 mL, then shows a sharp pH jump around 15 mL; after equivalence, the pH reaches about 11 at 16 mL and then levels off around 11.7–12 up to 35 mL. The derivative curve $dpH/dV_b=g(V_b)$ shows a narrow peak centered at $V_b \approx 15\ \mathrm{mL}$. A dashed vertical line marks equivalence at about 15 mL.
5. Draw a labeled diagram of the experimental apparatus used to perform the titration.
6. Write, with justification, the equation of the reaction underlying the titration.
7. Show that the experimentally determined methanoic acid concentration of the diluted solution is equal to $C_0 = 15.0 \times 10^{-3}\ \mathrm{mol\,L^{-1}}$.
Under the experimental conditions, the standard uncertainties on the concentration $C_b$ and on the volumes $V_a$, $V_{eq}$ (equivalence volume) are as follows:
$u(C_b) = 0.02 \times 10^{-2}\ \mathrm{mol\,L^{-1}}$ ; $u(V_a) = 0.2\ \mathrm{mL}$ ; $u(V_{eq}) = 0.5\ \mathrm{mL}$.
The standard uncertainty on the concentration $C_0$ of methanoic acid in the diluted solution is determined from the values and standard uncertainties on $C_b$, $V_a$ and $V_{eq}$ using the following expression:
$u(C_0)=C_0\sqrt{\left(\dfrac{u(C_b)}{C_b}\right)^2+\left(\dfrac{u(V_a)}{V_a}\right)^2+\left(\dfrac{u(V_{eq})}{V_{eq}}\right)^2}$.
8. Write the result of the measurement of the experimental concentration $C$ of the commercial solution, including its uncertainty, knowing that under the experimental conditions:
$\dfrac{u(C)}{C}=\dfrac{u(C_0)}{C_0}$.
9. Compare the concentration $C$ obtained experimentally with the concentration indicated by the manufacturer $C_{fab}$ by calculating the quotient below. Conclude.
$\dfrac{|C-C_{fab}|}{u(C)}$
⏳ Solution not generated yet
Open this statement in Expert Maths AI: the step-by-step solution is computed on demand, checked by a second resolution, then published here for everyone.
📝 See the solutionHave a similar exercise? Get it solved step by step, for free.
🧮 Solve my exercise