Baccalauréat 2021 — Physics-Chemistry specialty, Centres étrangers - Groupe 1 (jour 1) remplacement — exercise 1 : Preparation of a flavored dark beer (official exam paper)
Statement
Since antiquity, beers have been produced using the same process from four ingredients: water, malt, hops, and yeast. The origin of the ingredients and the different processing steps give the beer its color, flavor, and even its bitterness.
Between 250 and 300 chemical species present in beer come from the essential oils of hops, including more than 60 different esters, the most important of which are ethyl acetate, isoamyl acetate, isobutyl acetate, phenyl acetate, ethyl hexanoate, and ethyl caprylate.
To intensify the fruity flavor of a beer, an ester can be added at the end of production; its synthesis reaction will first be studied (part 1). Since the quality of the water used is very important in beer production, the analysis of brewing water will be carried out in a second step (part 2).
Part 1 – Synthesis of an ester in the laboratory
The ester, denoted E, whose semi-developed formula is shown below, gives a red-fruit aroma that can be used to intensify the taste of a beer.
Figure: semi-developed formula of ester E: $\mathrm{CH_3-CH_2-CH_2-CH_2-CH_2-C(=O)-O-CH_2-CH_3}$.
This ester can be synthesized in the laboratory from a carboxylic acid and an alcohol. The reaction modeling this synthesis is called an esterification reaction. The equation of the esterification reaction, written in the general case with R and R’ carbon chains, is as follows: $\mathrm{R-C(=O)-OH + R'-OH \rightarrow R-C(=O)-O-R' + H_2O}$. The species are respectively: carboxylic acid, alcohol, ester, water.
Data
- Prefixes used in nomenclature rules:
Table: number of carbon atoms 1, 2, 3, 4, 5, 6, 7, 8; corresponding prefix meth-, eth-, prop-, but-, pent-, hex-, hept-, oct-.
- Density $\rho$ (in $\mathrm{g\cdot cm^{-3}}$) at 25 °C: carboxylic acid A: 0.930; alcohol B: 0.789.
- Molar mass (in $\mathrm{g\cdot mol^{-1}}$): Acid A: 116.2; Alcohol B: 46.1; Ester denoted E: 144.2.
- Excerpt from an infrared spectroscopy table:
Table: O-H bond free alcohol, wavenumber 3500–3700 $\mathrm{cm^{-1}}$, strong intensity, sharp; O-H bond bound alcohol, 3200–3400 $\mathrm{cm^{-1}}$, strong, broad; O-H bond carboxylic acid, 2500–3200 $\mathrm{cm^{-1}}$, strong to medium, broad; $\mathrm{C_{tri}-H}$ bond, 3000–3100 $\mathrm{cm^{-1}}$, medium; $\mathrm{C_{tét}-H}$ bond, 2800–3000 $\mathrm{cm^{-1}}$, strong; C=O bond, 1680–1740 $\mathrm{cm^{-1}}$, strong.
Remarks: $\mathrm{C_{tri}}$ means that the carbon atom is trigonal, that is, bonded to three neighbors. $\mathrm{C_{tét}}$ means that the carbon atom is tetragonal, that is, bonded to four neighbors.
1. Name ester E and draw its skeletal formula.
2. Write the semi-developed formulas of carboxylic acid A and alcohol B involved in the synthesis of ester E and name each of them.
To obtain ester E, a reflux mixture of alcohol volume $V_{alcool}=20.0\ \mathrm{mL}$ and carboxylic acid volume $V_{acide}=43.0\ \mathrm{mL}$ is heated in the presence of sulfuric acid. After separation, washing, and drying, a mass $m_E=33.1\ \mathrm{g}$ of ester E is obtained.
3. Justify the twofold advantage of reflux heating.
4. Sulfuric acid acts as a catalyst in this synthesis. State the definition of a catalyst.
5. Show that the reactants are in practically stoichiometric proportions and determine the yield of this synthesis.
To improve the synthesis yield, three syntheses are carried out by varying different experimental parameters. For each synthesis, a time-dependent monitoring of the carboxylic acid concentration is performed by titration. This monitoring leads to the plots showing the variation of the carboxylic acid concentration as a function of time (figure 1).
Table of experimental conditions: Synthesis 1: acid volume 43 mL, alcohol volume 20 mL, catalyst yes, temperature 50 °C. Synthesis 2: acid volume 43 mL, alcohol volume 25 mL, catalyst yes, temperature 50 °C. Synthesis 3: acid volume 43 mL, alcohol volume 20 mL, catalyst yes, temperature 70 °C.
Figure 1: time evolution of the carboxylic acid concentration. Graph of $[\text{carboxylic acid}]$ in $\mathrm{mol\cdot L^{-1}}$ on the y-axis, from 0 to about 1.8, and $t$ in seconds on the x-axis, from 0 to about 950 s. The three curves start at about 1.8 $\mathrm{mol\cdot L^{-1}}$ at $t=0$. Curve A (green/yellow, highest and slowest): around 1.05 at 200 s, around 0.78 at 400 s, then it tends toward about 0.58–0.60. Curve B (blue, intermediate): around 0.90 at 200 s, around 0.67 at 400 s, then it tends toward about 0.58. Curve C (red, lowest and fastest): around 0.68 at 200 s, around 0.43 at 400 s, then it tends toward about 0.28–0.30.
6. Identify the experimental conditions, specifying the synthesis number, for which the esterification reaction is the slowest. Specify the associated curve.
7. Identify the experimental conditions, specifying the synthesis number, for which the yield of the esterification reaction is improved. Specify the associated curve.
Infrared spectra of each reactant before the synthesis and of the organic product isolated and purified after the synthesis were recorded. They are reproduced below.
Figure: three infrared spectra, transmittance %T on the y-axis from 0 to 100 and wavenumber in $\mathrm{cm^{-1}}$ on the x-axis decreasing from 4000 to 500. Spectrum 1: very marked broad band around 3300 $\mathrm{cm^{-1}}$, bands around 3000–2850 $\mathrm{cm^{-1}}$, many intense bands between 1500 and 1000 $\mathrm{cm^{-1}}$, no very strong C=O band around 1700 $\mathrm{cm^{-1}}$. Spectrum 2: bands around 3000–2850 $\mathrm{cm^{-1}}$, strong C=O band around 1740 $\mathrm{cm^{-1}}$, many intense bands between 1500 and 1000 $\mathrm{cm^{-1}}$, absence of broad carboxylic O-H band. Spectrum 3: broad carboxylic acid O-H band extending approximately from 3200 to 2500 $\mathrm{cm^{-1}}$, bands around 3000–2850 $\mathrm{cm^{-1}}$, very strong C=O band around 1710–1740 $\mathrm{cm^{-1}}$.
8. Among these three infrared spectra, identify the one corresponding to ester E, stating the method followed.
Part 2 – Study of the brewing water of a dark beer
The composition of the water used in beer making influences its flavor and color. In the case of dark beer, the water used must contain, among other species, chloride ions at a mass concentration between 100 and 200 $\mathrm{mg\cdot L^{-1}}$.
In this part, we want to know whether a spring water can be suitable for brewing beer. To this end, the chloride ions present in this spring water are titrated by a silver nitrate solution. The titration is monitored by conductimetry.
Data:
- Ionic molar conductivities at 25 °C: nitrate ion $\mathrm{NO_3^-}$: $\lambda=7.1\ \mathrm{mS\cdot m^2\cdot mol^{-1}}$; chloride ion $\mathrm{Cl^-}$: $\lambda=7.7\ \mathrm{mS\cdot m^2\cdot mol^{-1}}$; silver ion $\mathrm{Ag^+}$: $\lambda=6.2\ \mathrm{mS\cdot m^2\cdot mol^{-1}}$; sodium ion $\mathrm{Na^+}$: $\lambda=5.0\ \mathrm{mS\cdot m^2\cdot mol^{-1}}$.
- Atomic molar mass of chlorine: $M(Cl)=35.5\ \mathrm{g\cdot mol^{-1}}$.
Study of the reaction underlying the titration
For the reaction between silver ions and chloride ions to be suitable for titration, the associated transformation must be fast and complete. We want to make sure that it satisfies these conditions.
For this purpose, the following are mixed in a test tube:
• a volume $V_1=2.0\ \mathrm{mL}$ of aqueous sodium chloride solution $(\mathrm{Na^+(aq)},\ \mathrm{Cl^-(aq)})$ with concentration $C_1=5.00\times10^{-2}\ \mathrm{mol\cdot L^{-1}}$;
• and a volume $V_2=2.0\ \mathrm{mL}$ of aqueous silver nitrate solution $(\mathrm{Ag^+(aq)},\ \mathrm{NO_3^-(aq)})$ with concentration $C_2=4.25\times10^{-2}\ \mathrm{mol\cdot L^{-1}}$.
An immediate formation of a white precipitate is observed, the solid being identified as silver chloride. The equation of the reaction modeling this transformation is: $\mathrm{Ag^+(aq)+Cl^-(aq)\rightarrow AgCl(s)}$.
The value of the equilibrium constant of this reaction at 25 °C is $K=6.4\times10^9$.
9. Show that at equilibrium of the chemical system, the equilibrium advancement $x_{eq}$ can be determined by solving the equation:
$\dfrac{(V_1+V_2)^2(C^0)^2}{(V_1C_1-x_{eq})(V_2C_2-x_{eq})}=K$ with $C^0=1\ \mathrm{mol\cdot L^{-1}}$.
This quadratic equation in $x_{eq}$ has two solutions whose rounded values are: $x_1=1\times10^{-4}\ \mathrm{mol}$ and $x_2=8.5\times10^{-5}\ \mathrm{mol}$. Indicate which solution can be retained for this chemical system.
10. Discuss whether this transformation is suitable for titrating chloride ions.
Titration of the spring water considered for brewing
A volume $V_1=100.0\ \mathrm{mL}$ of spring water is taken and placed in a large beaker into which a conductivity cell is immersed. Using a graduated burette, an aqueous silver nitrate solution $(\mathrm{Ag^+(aq)},\ \mathrm{NO_3^-(aq)})$ with concentration $C_3=1.00\times10^{-2}\ \mathrm{mol\cdot L^{-1}}$ is added gradually.
The conductivity $\sigma$ of the mixture in the beaker, kept under regular stirring, varies as a function of the volume $V_3$ of silver nitrate solution added. The plot of this variation is shown in figure 2.
Figure 2: variation of the conductivity $\sigma$ of the mixture in the beaker as a function of the volume $V_3$ of silver nitrate solution added. Graph with $\sigma$ in $\mathrm{mS\cdot m^{-1}}$ on the y-axis, from 0 to 20, and $V_3$ in mL on the x-axis, from 0 to 25. The experimental points show a conductivity of about 9.0 $\mathrm{mS\cdot m^{-1}}$ at 0 mL, decreasing slightly to about 7.7–8.0 $\mathrm{mS\cdot m^{-1}}$ around 10–12 mL, then increasing clearly after equivalence: about 9.5 at 14 mL, 10.8 at 15 mL, 12.0 at 16 mL, 14.0 at 18 mL, 15.8 at 20 mL, 18.5 at 23 mL, and 20.0 at 25 mL. The slope change is located around $V_3\approx13\ \mathrm{mL}$.
11. Draw a labeled diagram of the apparatus used for this titration.
12. Justify the changes in conductivity $\sigma$ of the solution contained in the beaker before and after equivalence.
13. State whether the chloride ion content of the analyzed water is suitable for the production of dark beer.
The candidate is invited to take initiative, state the assumptions they are led to make, and present the method followed even if it did not succeed. The method followed is assessed and must be properly presented.
⏳ Solution not generated yet
Open this statement in Expert Maths AI: the step-by-step solution is computed on demand, checked by a second resolution, then published here for everyone.
📝 See the solutionHave a similar exercise? Get it solved step by step, for free.
🧮 Solve my exercise