Baccalauréat 2021 — Physics-Chemistry specialty, Métropole, Mayotte, La Réunion, Antilles Guyane (jour 1) remplacement — exercise 1 : Synthesis of a flavoring agent (official exam
Statement
Isoamyl ethanoate is a fragrant chemical species found notably in ripe apples. Its pleasant odor and low toxicity make it suitable for use as a flavoring in sweets. This chemical species belongs to the functional family of esters.
This exercise aims first to study the chemical species involved in the synthesis of isoamyl ethanoate, then to study the conditions for optimizing this synthesis.
Data:
- Physicochemical data for some chemical species: table with the columns 3-methylbutan-1-ol, ethanoic acid, isoamyl ethanoate, water, cyclohexane. Molecular formula: $\mathrm{C_5H_{12}O}$ ; $\mathrm{C_2H_4O_2}$ ; $\mathrm{C_7H_{14}O_2}$ ; $\mathrm{H_2O}$ ; $\mathrm{C_6H_{14}}$. Density at 25 °C, in $\mathrm{g\cdot mL^{-1}}$: 0.81 ; 1.05 ; 0.87 ; 1.00 ; 0.78. Molar mass, in $\mathrm{g\cdot mol^{-1}}$: 88.1 ; 60.0 ; 130.2 ; 18.0 ; 84.2. Solubility in water at 25 °C: slightly soluble ; very soluble ; very slightly soluble ; — ; very slightly soluble.
- Table of some infrared absorption bands: C = C bond, wavenumber 1 550 to 1 650 $\mathrm{cm^{-1}}$ ; C = O bond, 1 650 to 1 800 $\mathrm{cm^{-1}}$ ; C – H bond, 2 800 to 3 100 $\mathrm{cm^{-1}}$ ; O – H bond of a carboxylic acid, 2 500 to 3 200 $\mathrm{cm^{-1}}$ ; O – H bond of an alcohol, 3 200 to 3 500 $\mathrm{cm^{-1}}$.
- Nomenclature rules. Carbon skeletons: for branched hydrocarbons, the position of the branch on the main chain is indicated by a number and the group is indicated by the prefix. Examples of groups: methyl $\mathrm{-CH_3}$ ; ethyl $\mathrm{-CH_2-CH_3}$ ; propyl $\mathrm{-CH_2-CH_2-CH_3}$ ; butyl $\mathrm{-CH_2-CH_2-CH_2-CH_3}$.
- Functional family of esters: general formula $\mathrm{R-C(=O)-O-R'}$ ; ester family ; name: alkyl alkanoate ; suffix: “oate”. Examples given: methyl ethanoate, represented by $\mathrm{CH_3-C(=O)-O-CH_3}$ ; 2-methylpentyl propanoate, represented by $\mathrm{CH_3-CH_2-C(=O)-O-CH_2-CH(CH_3)-CH_2-CH_2-CH_3}$.
1. From reactants to products of the synthesis
To carry out the synthesis of isoamyl ethanoate in the laboratory, the following two reactants are used: ethanoic acid and 3-methylbutan-1-ol.
The semi-developed formula of 3-methylbutan-1-ol is: $\mathrm{HO-CH_2-CH_2-CH(CH_3)-CH_3}$.
1.1. Justify the name 3-methylbutan-1-ol.
1.2. Give the skeletal formula of 3-methylbutan-1-ol and circle the characteristic group of the molecule. Name the corresponding functional family.
1.3. Figure 1 gives the infrared spectra of the two reactants. Identify, with justification, the spectrum corresponding to 3-methylbutan-1-ol.
Figure 1: infrared spectra of the two reactants in the synthesis. The two graphs show transmittance in % as a function of wavenumber in $\mathrm{cm^{-1}}$ from 4 000 to 500. Spectrum A: broad absorption band around 3 200–3 500 $\mathrm{cm^{-1}}$, C–H bands around 3 000 $\mathrm{cm^{-1}}$, no strong C = O band around 1 700 $\mathrm{cm^{-1}}$, many fingerprint bands around 1 500–900 $\mathrm{cm^{-1}}$. Spectrum B: very broad band between about 2 500 and 3 300 $\mathrm{cm^{-1}}$, strong intense band around about 1 700 $\mathrm{cm^{-1}}$, many bands around 1 500–500 $\mathrm{cm^{-1}}$.
1.4. Draw the semi-developed formula of isoamyl ethanoate using the nomenclature rules provided.
2. Optimizing the laboratory synthesis of isoamyl ethanoate
The synthesis of isoamyl ethanoate is a slow and incomplete transformation.
Synthesis procedure:
Pour into a flask a volume $V_1$ of 3-methylbutan-1-ol, a mass $m_2$ of ethanoic acid, and a volume $V_3$ of concentrated sulfuric acid.
As shown in Figure 2, the flask, fitted with an air condenser, is placed in a water bath kept at constant temperature.
To show the influence of certain experimental conditions on this synthesis, four experiments are carried out. The table below presents the experimental results for four different conditions.
Figure 2: diagram of the experimental setup. A flask containing the reaction mixture is placed on a heating mantle or in a water bath; it is fitted with a vertical air condenser mounted on a stand.
Condition table: experiment 1: temperature 30 °C ; initial volume $V_1$ of 3-methylbutan-1-ol 12.0 mL ; initial mass $m_2$ of ethanoic acid 6.62 g ; volume $V_3$ of sulfuric acid 0 mL ; order of magnitude of the half-reaction time several months. Experiment 2: temperature 30 °C ; $V_1=12.0$ mL ; $m_2=6.62$ g ; $V_3=0.5$ mL ; half-reaction time several hours. Experiment 3: temperature 60 °C ; $V_1=12.0$ mL ; $m_2=6.62$ g ; $V_3=0.5$ mL ; half-reaction time about ten minutes. Experiment 4: temperature 60 °C ; $V_1=36.0$ mL ; $m_2=6.62$ g ; $V_3=0.5$ mL ; half-reaction time less than ten minutes.
2.1. Write, using molecular formulas, the equation of the reaction modeling the synthesis of isoamyl ethanoate, knowing that another chemical species to be identified is also produced. Justify.
2.2. Using the experimental results, indicate the experimental conditions that make it possible to optimize the kinetics of this synthesis.
2.3. Experimental determination of the yield of the synthesis of experiment 3.
2.3.1. Determine the amounts of substance of the reactants in the initial mixture of experiment 3 and give a description of this initial mixture.
2.3.2. The mass of isoamyl ethanoate obtained at the end of the reaction is $m_3 = 6.20$ g. Determine the yield of the synthesis in experiment 3. Comment.
2.4. Experimental determination of the yield of the synthesis of experiment 4.
At the end of the synthesis, the aqueous phase is separated from the organic phase formed in the flask. This aqueous phase contains the unreacted ethanoic acid and sulfuric acid. These two acids are responsible for the total acidity of the solution.
An acid-base titration of this aqueous phase is carried out, using as titrant an aqueous potassium hydroxide solution $(\mathrm{K^+(aq)} ; \mathrm{HO^-(aq)})$ with concentration $C_B = 1.0\ \mathrm{mol\cdot L^{-1}}$. This titration is monitored by pH measurement, and the curves $\mathrm{pH}=f(V_B)$ and $\dfrac{\mathrm{d}pH}{\mathrm{d}V}=f(V_B)$ are shown in Figure 3.
Figure 3: experimental curves obtained during the titration of the aqueous phase obtained at the end of experiment 4. The graph gives the pH as a function of the volume $V_B$ of potassium hydroxide solution added, from 0 to 16 mL, and the derivative $\mathrm{d}pH/\mathrm{d}V_B$ in $\mathrm{mL^{-1}}$. The pH curve rises from about pH 1 to pH 12. A first jump is observed around $V_B \approx 4.2$ mL, labeled “titration of the acidity due to sulfuric acid alone”; the derivative shows a first maximum near 4.2 mL. A second much larger jump is observed around $V_B \approx 10.8$ to 11.0 mL, labeled “titration of total acidity”; the derivative shows a main maximum near 11 mL.
2.4.1. Write the equation of the reaction underlying the titration between ethanoic acid and the hydroxide ion.
2.4.2. Determine the volume of potassium hydroxide needed to titrate ethanoic acid.
2.4.3. Deduce the amount of ethanoic acid remaining at the end of the synthesis in experiment 4.
2.4.4. Determine the amount of ester formed and calculate the yield of the synthesis in experiment 4. Deduce a way to optimize the yield of this synthesis.
3. Improving the yield of the synthesis by using a Dean-Stark trap
Experiment 3 is carried out again but using a Dean-Stark apparatus (see Figure 4), which allows the water formed to be continuously separated from the rest of the reaction medium.
The decanting tube of this apparatus is initially empty. A volume of 30 mL of cyclohexane is initially added to the reaction medium, then the reaction mixture is heated under reflux.
It is assumed that only water and cyclohexane vaporize, while the reactants and isoamyl ethanoate remain in the flask. The cyclohexane and water liquefy in the water condenser and fall into the Dean-Stark decanting tube. When the decanting tube is full, the excess of phase A flows back into the reaction mixture.
Figure 4: diagram of the setup with Dean-Stark apparatus. A flask containing the reaction mixture is heated; it is connected to a vertical Dean-Stark tube, itself fitted with a water condenser. In the decanting tube, two liquid layers are visible: phase A above, phase B below. Phase A can overflow back into the flask when the tube is full.
3.1. Identify the nature of phases A and B present in the decanting tube. Justify.
3.2. State the purpose of this apparatus for optimizing this synthesis.
3.3. When the transformation is complete, the volume of water collected in the decanting tube is $V = 1.8$ mL. Deduce the amount of ester formed. Conclude on the effectiveness of this apparatus.
⏳ Solution not generated yet
Open this statement in Expert Maths AI: the step-by-step solution is computed on demand, checked by a second resolution, then published here for everyone.
📝 See the solutionHave a similar exercise? Get it solved step by step, for free.
🧮 Solve my exercise