Baccalauréat 2021 — Physics-Chemistry specialty, Métropole, Mayotte, La Réunion, Antilles Guyane (jour 1) — exercise 2 : Cannizzaro Synthesis (official exam paper)
Statement
EXERCISE A - CANNIZZARO SYNTHESIS
Keyword: organic synthesis
In 1853, the Italian chemist Stanislao Cannizzaro developed a synthesis that bears his name, making it possible to obtain benzyl alcohol and the benzoate ion from benzaldehyde. The benzoate ion is transformed into benzoic acid by acidification. Benzoic acid is a chemical species used as a preservative in the food industry, and benzyl alcohol, for its part, is used as an antiseptic in the pharmaceutical industry.
The aim of this exercise is to study the Cannizzaro synthesis, then the techniques that make it possible to isolate and check the purity of the products obtained.
A photograph of Stanislao Cannizzaro is shown, source Wikipedia.
Data:
- chemical species: table presenting three species. Benzyl alcohol: topological formula = benzene ring bearing a –CH₂–OH substituent; semi-developed formula $C_6H_5–CH_2–OH$; melting point −15 °C. Benzoic acid: topological formula = benzene ring bearing a –COOH substituent; semi-developed formula $C_6H_5–COOH$; melting point 122 °C. Benzaldehyde: topological formula = benzene ring bearing a –CHO substituent; semi-developed formula $C_6H_5–CHO$; melting point −26 °C.
- oxidizing agent / reducing agent couples: benzoate ion / benzaldehyde: $C_6H_5–COO^-(aq) / C_6H_5–CHO(aq)$ in basic medium; benzaldehyde / benzyl alcohol: $C_6H_5–CHO(\ell) / C_6H_5–CH_2–OH(\ell)$;
- density of liquid diethyl ether at 25 °C relative to liquid water: $d_{éther} = 0,71$;
- solubility of chemical species in water and diethyl ether: in water, benzyl alcohol insoluble, benzoic acid slightly soluble (solubility: 2,9 g·L⁻¹ at 20 °C and 1,7 g·L⁻¹ at 0 °C), benzoate ion very soluble, benzaldehyde insoluble; in diethyl ether, benzyl alcohol soluble, benzoic acid soluble, benzoate ion insoluble, benzaldehyde soluble;
- $pK_a$ at 25 °C of the benzoic acid $C_6H_5–COOH(aq)$ / benzoate ion $C_6H_5–COO^-(aq)$ couple: 4,2.
1. Modeling the Cannizzaro synthesis
The Cannizzaro synthesis can be modeled by a redox reaction in which the same reactant, benzaldehyde, is both the oxidizing agent and the reducing agent; this is then called a disproportionation reaction. The reaction equation is as follows:
$2\ C_6H_5–CHO\ (\ell) + HO^-\ (aq) \rightarrow C_6H_5–COO^-\ (aq) + C_6H_5–CH_2–OH\ (\ell)$.
Figure 1. Reflux setup chosen to optimize the Cannizzaro synthesis: flask heated on a heating mantle, topped with a vertical water condenser; cold water enters through the lower nozzle and exits through the upper nozzle; the setup is held in place by a stand and clamps.
1.1 Copy the topological formula of benzaldehyde, circle the characteristic group, and name the corresponding functional family.
1.2 Justify, by identifying the oxidizing agent / reducing agent couples, that the reaction modeling the Cannizzaro synthesis is a disproportionation.
2. Optimization of the Cannizzaro synthesis
To carry out the Cannizzaro synthesis, a solution of potassium hydroxide and commercial benzaldehyde are mixed in a flask, then shaken vigorously. It is chosen to work with a concentrated potassium hydroxide solution and to use the setup in Figure 1.
Justify these experimental choices in order to optimize the synthesis.
3. Separation and purity control of the synthesis products
At the end of the reaction, the contents of the flask are poured into a separatory funnel and a liquid-liquid extraction is carried out using diethyl ether as the extracting solvent. After decantation, an immiscible aqueous phase and organic phase are distinguished and separated from one another.
The organic phase is then treated using a device that makes it possible to evaporate the diethyl ether present and recover a product A in liquid form.
The aqueous phase is placed in a large beaker placed in a water-ice bath. Concentrated hydrochloric acid solution is added drop by drop until the pH is below 2. Formation of a solid corresponding to product B is observed.
A thin-layer chromatography of products A and B obtained is carried out under a fume hood. All products are dissolved at 1 % in dichloromethane. The plate is revealed using a UV lamp and the resulting chromatogram is shown in Figure 2.
Figure 2. Chromatogram obtained: TLC plate with five spots marked at the bottom (1) product A, (2) commercial benzyl alcohol, (3) product B, (4) commercial benzoic acid, (5) commercial benzaldehyde. For (1), a large elongated spot near the bottom and a spot at the top are observed; for (2), a small spot near the bottom at the same level as the large lower spot of (1); for (3), a lower spot; for (4), a lower spot at a level close to (3); for (5), a spot at the top, at the same level as the upper spot of (1).
3.1. Draw a labeled diagram of the separatory funnel, specifying the phases present and their respective compositions after decantation.
3.2. Justify the use of diethyl ether to carry out the separation of the synthesis products.
3.3. Justify why one wants to obtain a pH below 2 for the aqueous phase.
3.4. State the purpose of the water-ice bath.
3.5. Give one technique allowing product B to be isolated from the aqueous phase.
3.6. Using the chromatogram, conclude on the effectiveness of the separation step of the products obtained.
3.7. Using the chromatogram, conclude on the purity of the products obtained.
⏳ Solution not generated yet
Open this statement in Expert Maths AI: the step-by-step solution is computed on demand, checked by a second resolution, then published here for everyone.
📝 See the solutionHave a similar exercise? Get it solved step by step, for free.
🧮 Solve my exercise