Baccalauréat 2021 — Physics-Chemistry specialty, Métropole, Mayotte, La Réunion, Antilles Guyane (jour 1) — exercise 4 : The pomelo (official exam paper)
Statement
EXERCISE C - THE POMELO
Keywords: pH-metric titration; calibration-based determination
The pomelo is a fruit resulting from a cross between a grapefruit tree and an orange tree. This citrus fruit is known for its high content of ascorbic acid (vitamin C) compared with other fruits, which gives it “antioxidant” properties. It also contains citric acid.
The aim of this exercise is to study two properties of pomelo juice: acid-base properties mainly due to citric acid and “antioxidant” properties due to ascorbic acid.
An image shows a whole pomelo and half a pomelo.
Data:
- molecular molar mass of citric acid: $M(C_6H_8O_7) = 192.0$ g·mol⁻¹;
- molecular molar mass of ascorbic acid: $M(C_6H_8O_6) = 176.0$ g·mol⁻¹;
- acid-base color indicators: bromothymol blue, acid form color yellow, transition range 6.0–7.6, basic form color blue; methyl orange, acid form color red, transition range 3.1–4.4, basic form color yellow; cresol red, acid form color yellow, transition range 7.2–8.8, basic form color red.
1. Titratable acidity of pomelo juice
Pomelo juice is acidic. This acidity is mainly due to three species: citric acid, the most abundant, malic acid, and ascorbic acid, present in smaller quantities.
To compare citrus acidity more easily, we assume that the only acid present in pomelo juice is citric acid, a triprotic acid, denoted $H_3A$. Titratable acidity is defined as the mass, expressed in grams, of citric acid per liter of juice extracted from the citrus fruit. The titratable acidity of pomelo juice is of the order of ten grams of citric acid per liter of juice.
To determine the titratable acidity of pomelo juice, an acid-base titration of 20.0 mL of fresh filtered juice is carried out using an aqueous sodium hydroxide solution $(Na^+(aq) ; HO^-(aq))$ with concentration equal to 0.50 mol·L⁻¹, and the titration is followed by pH-metry. The titration curve is shown below.
Figure 1. Titration curve of pomelo juice by an aqueous sodium hydroxide solution: graph with volume of titrant solution added in mL from 0 to 20 on the x-axis and pH from 0 to 14 on the y-axis. The curve starts at about pH 3.0 for 0 mL, increases gently up to about pH 6.0 around 9 mL, shows a pH jump centered around $V_E≈10.0$ mL (pH rising from about 6.5 to 9.5), then reaches about pH 12.3 at 20 mL. Experimental crosses are aligned along the curve.
1.1. Determine graphically the pH value of fresh filtered pomelo juice. Comment.
1.2. Draw and label the setup used to carry out this titration.
1.3. Titration followed by colorimetry
1.3.1. Choose, from the list of acid-base color indicators, the one that can be used to perform the colorimetric titration of pomelo juice acidity. Justify.
1.3.2. Specify the color change that can be observed during the titration.
The equation for the reaction underlying the titration is:
$H_3A(aq) + 3\ HO^-(aq) \rightarrow A^{3-}(aq) + 3\ H_2O(\ell)$.
1.4. Using the titration curve (figure 1), determine the titratable acidity of pomelo juice. Comment.
2. Determination of the amount of ascorbic acid in pomelo juice
According to the French National Agency for Food, Environmental and Occupational Health & Safety (ANSES), to cover daily needs, an adult is advised to ingest about 100 mg per day of ascorbic acid or vitamin C.
In order to estimate the volume of pomelo juice needed for an adult to cover daily ascorbic acid needs, we seek to evaluate the amount of this chemical species present in a juice. To do this, the ascorbic acid present in a pomelo juice is reacted with an excess of iodine $I_2$ in a known amount, then the amount of remaining iodine is determined. The initial amount of ascorbic acid present in the juice is then deduced.
Experimentally:
- Reaction of ascorbic acid and iodine: 5.0 mL of pomelo juice are mixed with 5.0 mL of an aqueous iodine solution with concentration equal to $8.0×10^{-3}$ mol·L⁻¹. After a few moments, the intensity of the color of the mixture no longer changes. The resulting 10.0 mL mixture is denoted F.
This slow and complete transformation can be modeled by the following reaction equation:
$C_6H_8O_6(aq) + I_2(aq) + 2\ H_2O(\ell) \rightarrow C_6H_6O_6(aq) + 2\ H_3O^+(aq) + 2\ I^-(aq)$.
- Determination of the remaining iodine: a calibration-based determination is carried out using spectrophotometric measurements.
- A set of aqueous iodine solutions is prepared to obtain the calibration curve in figure 2;
- A blank with a mixture containing pomelo juice diluted with distilled water is prepared, then the absorbance of the final mixture F is measured; it is $A = 0.11$.
Figure 2. Absorbance curve of aqueous iodine solutions as a function of their concentration: graph with iodine concentration in mmol·L⁻¹ from 0 to 2 on the x-axis and absorbance from 0 to 0.20 on the y-axis. The calibration line passes through the origin and through points close to $(0.2 ; 0.02)$, $(0.4 ; 0.04)$, $(0.8 ; 0.077)$, $(1.2 ; 0.115)$, $(1.6 ; 0.150)$ and $(2.0 ; 0.195)$; for $A=0.11$, the concentration read is close to 1.1 mmol·L⁻¹.
2.1. Determine the amount-of-substance concentration in iodine remaining in the final mixture F and deduce the amount of iodine that reacted with the ascorbic acid in the pomelo juice.
2.2. Show that the value of the ascorbic acid concentration in fresh pomelo juice is approximately equal to $6×10^{-3}$ mol·L⁻¹.
2.3. Calculate the volume of pomelo juice needed to completely cover an adult's daily ascorbic acid needs. Comment.
⏳ Solution not generated yet
Open this statement in Expert Maths AI: the step-by-step solution is computed on demand, checked by a second resolution, then published here for everyone.
📝 See the solutionHave a similar exercise? Get it solved step by step, for free.
🧮 Solve my exercise