Baccalauréat 2021 — Physics-Chemistry specialty, Amérique du Nord (jour 2) remplacement — exercise 1 : The GRACE-FO mission (official exam paper)
Statement
Keywords: motion of a satellite; 2nd law of Newton; gravitational field; electric field; light interference; capacitance of a capacitor.
The gravitational attraction of our planet varies slightly from one month to the next. These small variations in gravity are mainly due to an infinitesimal fraction of the Earth’s mass, constantly in motion, essentially water: rain falls, dew evaporates, ocean currents flow, ice melts…
On 22 May 2018, two GRACE-FO scientific satellites (Gravity Recovery and Climate Experiment – Follow-on) are launched. These two twin satellites located on the same orbit aim to measure with great precision the monthly variations of the Earth’s gravitational field in order to track liquid or frozen water masses.
Iconographic document: photograph/illustration of two satellites above the Earth, against a space background.
A. Orbital characteristics
The orbit of the satellites of the GRACE-FO mission is almost circular at altitude $z$ equal to 490 km. The inclination of the plane of the trajectory with respect to the equator is equal to 89,0 degrees; this is called a polar orbit. The two twin satellites move on the same orbit at a distance, denoted $L$, of 220 km from one another. Their altitude allows them to travel about 15 times around their polar orbit per day and thus obtain a monthly mapping of the evolution of water masses.
We study the motion of one of these satellites, of mass $m$, in the geocentric reference frame considered inertial.
Data:
• universal gravitational constant: $G = 6{,}67\times10^{-11}\ \mathrm{N\cdot m^2\cdot kg^{-2}}$
• mass of the Earth: $M_T = 5{,}98\times10^{24}\ \mathrm{kg}$
• radius of the Earth: $R_T = 6\ 371\ \mathrm{km}$
A.1. On the answer sheet, draw a diagram, not to scale, showing the Earth (center T) and of radius $R_T$, and the satellite with center S on its orbit at an altitude $z$. On this diagram, represent a unit vector $\vec n$ directed from the satellite toward the Earth.
A.2. Give the vector expression, in terms of $G$, $m$, $M_T$, $R_T$, $z$ and $\vec n$, of the gravitational force $\vec F_{T/S}$ exerted by the Earth on the point-like satellite. Represent this force vector, not to scale, on the diagram drawn in question A.1.
A.3. Deduce the vector expression of the Earth’s gravitational field $\vec g$.
A.4. Considering only the action of the Earth, establish the vector expression of the satellite’s acceleration $\vec a$.
A.5. Show that, within the approximation of a circular orbit, the motion of the satellite is uniform.
A.6. Show then that the expression for the satellite’s speed $v$ is given by the relation:
$v = \sqrt{\dfrac{G\cdot M_T}{R_T+z}}$.
A.7. Deduce the value of the satellite’s revolution period and check that it is consistent with the information given in the statement: “their altitude allows them to travel about 15 times around their polar orbit per day.”
We consider the particular situation sketched below. The leading satellite passes over a region where the gravitational field $\vec g_1$ is not centripetal, while the 2nd satellite flies over a region where a centripetal gravitational field $\vec g_2$ prevails.
Diagram: a circular section of orbit above a blue half-Earth. Two satellites are on the same orbit: on the left, “Leading satellite”, on the right, “2nd satellite”. Dotted lines connect each satellite to the center of the Earth. For the leading satellite, the vector $\vec g_1$ is directed downward but is not aligned with the radial direction toward the center of the Earth; for the 2nd satellite, the vector $\vec g_2$ is directed toward the center of the Earth. Note: “The scales are not respected”.
A.8. In the case of the sketched situation, explain, in detail, whether the distance, $L$, between the two satellites remains constant, increases, or decreases.
B. Operating principle of the onboard interferometer
The leading satellite is affected first by a change in the gravitational field; this then causes a slight change in the distance separating it from the 2nd satellite. Measuring, by interferometry, the variations in distance between the two satellites makes it possible to determine the evolution of the gravitational field in the overflown region. For this purpose, a laser interferometer, part of which is onboard the leading satellite and the other part on the 2nd satellite, determines with very high precision the variation in distance, denoted $d$, between the two satellites.
The simplified diagram of the operating principle of the interferometer is as follows:
Diagram: two areas “SATELLITE 1” and “SATELLITE 2”. In satellite 1, a laser on the left sends a beam toward a semi-reflecting mirror at A. Below the laser is an interference detector. Point D is below A, with a vertical segment AD of height $h = 60{,}0\ \mathrm{cm}$. In satellite 2, two mirrors are at points B (top) and C (bottom), vertically separated by a height $h$. The horizontal distance between D and C, or A and B, is denoted $L$. The beam from the laser splits at A: beam 1 follows A→B→C→D; beam 2 follows A→D; they recombine at D and then reach the interference detector. Note: “The scales are not respected”.
The light beam from the laser splits into two beams at the semi-reflecting mirror A: a beam 1 following the path ABCD, a beam 2 following the path AD. Beams 1 and 2 recombine at D to reach the interference detector.
The laser used emits infrared radiation of wavelength $\lambda$ equal to 1064 nm in vacuum.
B.1. Justify that the device shown by the simplified diagram makes it possible to obtain interference.
B.2. Define the phenomenon of constructive interference of two waves.
B.3. Using the information shown on the diagram, establish the expression of the path difference $\delta$ as a function of $L$.
Satellite 1 moves away by a distance $d$ from satellite 2. The two satellites are now separated by $L+d$.
B.4. Show then that the variation $\Delta\delta$ of the path difference is equal to $2d$.
The interference detector is able to detect at best a variation in path difference corresponding to two immediately successive states of constructive interference.
B.5. Justify that the variation in distance $d$ corresponding to two immediately successive states of constructive interference is equal to $\dfrac{\lambda}{2}$.
B.6. Calculate then the smallest detectable value of the variation in distance between the two satellites by the interferometer.
C. Principle of accelerometers
To access the Earth’s gravitational field very precisely, it is essential to measure non-gravitational forces (atmospheric drag, solar radiation pressure…) likely to interfere with the measurements.
Ultra-sensitive accelerometers onboard the satellites make it possible to indirectly determine non-gravitational forces through the measurement of the variation in the capacitance of several capacitors. A “proof mass”, held suspended at the center of an electrostatic cage, undergoes a displacement when it is subjected to a non-gravitational force. Its displacement results in a change in the capacitance of three pairs of capacitors.
Iconographic document: diagram of the electrostatic cage holding the proof mass suspended; a mobile proof mass is visible at the center of the cage.
We study the operation of a parallel-plate capacitor whose left face of the proof mass constitutes the moving electrode (see the diagram below), the other electrode being fixed to the electrostatic cage.
Diagram: a parallel-plate capacitor consists of a fixed vertical electrode on the left carrying charge $+q$ and a mobile vertical electrode on the right, attached to a gray block “proof mass”, carrying charge $-q$. A unit vector $\vec i$ is horizontal toward the right. The voltage $U$ is indicated between the electrodes. The distance between the fixed electrode and the reference position of the moving electrode is $e$; when the moving electrode moves positively, the distance between the electrodes becomes $e+X$.
A voltage $U$ is applied across the plates of the parallel-plate capacitor. In the absence of non-gravitational force, the distance between the two plates (fixed and moving) is denoted $e$. In the presence of a non-gravitational force, the moving plate undergoes a displacement $X$ (counted positively) in the direction defined by the unit vector $\vec i$ indicated on the diagram above.
For a parallel-plate capacitor, the capacitance $C$ is expressed by the relation $C = \dfrac{\varepsilon_0\cdot S}{D}$ where $\varepsilon_0$ represents the permittivity of free space, $S$ the area of the facing plates and $D$ the distance between the plates.
C.1. Discuss the influence of the displacement $X$, chosen positive, on the value of the capacitance $C$ of the capacitor.
C.2. Give the expression of the electric field $\vec E$ created between the capacitor plates as a function of $U$, $e$, $X$ and the unit vector $\vec i$.
The moving plate is subjected to the field $\vec E_1$ created by the fixed plate. Laws of electrostatics show that $\vec E_1 = \dfrac{\vec E}{2}$. It follows that the moving plate experiences a mechanical action modeled by the electric force $\vec F$. We consider the situation where the electric charge $q$ carried by the fixed plate is positive.
C.3. Identify which diagram, among the four following ones, correctly represents the electric field $\vec E$ and the electric force $\vec F$. A justification is expected.
Four diagrams are proposed. In all cases, the fixed left plate carries $q>0$, the moving plate on the right carries $-q$, and $\vec i$ is directed to the right. Diagram 1: $\vec E$ is directed to the left and $\vec F$ to the left. Diagram 2: $\vec E$ is directed to the right and $\vec F$ to the left. Diagram 3: $\vec E$ is directed to the left and $\vec F$ to the right. Diagram 4: $\vec E$ is directed to the right and $\vec F$ to the right.
The capacitor (described in the previous diagram) is associated with a second capacitor. The proof mass is mobile between two fixed plates, one on the left, the other on the right. The device is designed so that the electrostatic force exerted by the fixed plate on the right on the proof mass is exactly opposite to the electrostatic force exerted by the fixed plate on the left: the two forces cancel each other out.
Diagram: the proof mass is at the center between two fixed plates. On the left, the fixed plate carries $q>0$; on the right, the fixed plate carries $-q$. The left face of the proof mass carries $-q$ and the right face carries $q$. The distance on the left is $e+X$ and the distance on the right is $e-X$; the reference distances are $e$ on each side. The vector $\vec i$ is horizontal toward the right.
C.4. Establish the relation between the electric field $\vec E_d$ created by the fixed plate on the right and the electric field $\vec E_g$ created by the fixed plate on the left.
⏳ Solution not generated yet
Open this statement in Expert Maths AI: the step-by-step solution is computed on demand, checked by a second resolution, then published here for everyone.
📝 See the solutionHave a similar exercise? Get it solved step by step, for free.
🧮 Solve my exercise