Solved exercises🧮 Solve my exercise

Baccalauréat 2021 — Physics-Chemistry specialty, Amérique du Nord (jour 2) remplacement — exercise 2 : Protection of the steel foundations of offshore wind turbines (official exam

PhysicsLevel : High schoolProtection of the steel foundations of offshore wind turbines🌐 Lire en français
Statement
Keywords: reaction quotient; redox reaction; operation of a cell. An offshore wind farm project, the one off the islands of Yeu and Noirmoutier, plans to install sixty-two wind turbines. The method used to protect the submerged structures of these wind turbines against corrosion was debated. The initially envisaged “cathodic protection” consisted in placing so-called “sacrificial” anodes, made mainly of aluminium, on the steel foundations (95 % iron) of the wind turbines. Indeed, the reaction of the sacrificial anodes with dissolved dioxygen in water makes it possible, through an electrochemical transformation, to protect the iron from corrosion. Finally, after consultation, the manufacturer of the wind farm chose instead a protection system known as “impressed current” protection, which makes it possible to avoid releasing metals into the environment. Figure: an offshore wind turbine is shown with its submerged steel foundation. Sacrificial anodes are attached to the steel foundation; a close-up shows sacrificial anodes arranged in a cross on the structure. In this exercise, only the cathodic protection process is considered. A. Protection of iron by aluminium We want to verify that in an oxidizing medium iron can be protected from oxidation by putting it in electrical contact with aluminium, which then plays the role of sacrificial anode. By oxidation, metallic iron gives Fe II ions ($\mathrm{Fe^{2+}}$) and metallic aluminium gives $\mathrm{Al^{3+}}$ ions. The following cell is set up: Cell diagram: two beakers connected by a salt bridge. On the left, an aluminium plate is immersed in an aluminium sulfate solution. On the right, an iron plate is immersed in an iron(II) chloride solution. The two metal plates are connected by an external circuit containing a resistor $R$ in series with an ammeter $A$; the “COM” terminal of the ammeter is on the side of the iron electrode. In one beaker, a volume $V_1 = 50{,}0\ \mathrm{mL}$ of aqueous iron(II) chloride solution ($\mathrm{Fe^{2+}(aq)} + 2\ \mathrm{Cl^{-}(aq)}$) with an amount concentration $C_1 = 1{,}0\times10^{-1}\ \mathrm{mol\cdot L^{-1}}$ is poured, and then an iron plate is immersed. In a second beaker, a volume $V_2 = 50{,}0\ \mathrm{mL}$ of aluminium sulfate solution ($2\ \mathrm{Al^{3+}(aq)} + 3\ \mathrm{SO_4^{2-}(aq)}$) with an amount concentration $C_2 = 5{,}0\times10^{-2}\ \mathrm{mol\cdot L^{-1}}$ is poured, and then an aluminium plate is immersed. The two beakers are connected by a salt bridge and the two metal plates are connected by an ammeter and a resistor in series. The equation of the reaction modelling the transformation that may occur is: $2\ \mathrm{Al(s)} + 3\ \mathrm{Fe^{2+}(aq)} \rightleftharpoons 2\ \mathrm{Al^{3+}(aq)} + 3\ \mathrm{Fe(s)}$. The equilibrium constant $K$ associated with this reaction at 25 °C is equal to $10^{166}$. A.1. Write the initial reaction quotient $Q_{r,i}$. A.2. Calculate, at the initial state, the amount concentrations of the $\mathrm{Al^{3+}(aq)}$ ions and of the $\mathrm{Fe^{2+}(aq)}$ ions. A.3. Calculate the value of the initial reaction quotient $Q_{r,i}$ and then deduce the spontaneous direction of evolution of the transformation. A.4. Deduce the reaction occurring at the aluminium electrode. The ammeter shown in the diagram indicates a negative electric current value. A.5. Show that this negative value is consistent with the answer to the previous question. The anode is the electrode where oxidation occurs. The cathode is the electrode where reduction occurs. A.6. Identify the electrode that plays the role of anode in the cell. B. Mass of aluminium needed to protect the metal structure of a wind turbine The dissolved dioxygen in water reacts preferentially with the aluminium of the sacrificial anode rather than with the iron of the submerged structure of the wind turbine. We wish to evaluate the mass of aluminium needed to protect the structure of a wind turbine, that is, to provide cathodic protection. Data: • Oxidant/reductant couples involved: $\mathrm{Al^{3+}(aq) / Al(s)}$; $\mathrm{O_2(aq) / HO^{-}(aq)}$ • Half-equation for the $\mathrm{O_2(aq) / HO^{-}(aq)}$ couple: $\mathrm{O_2(aq)} + 2\ \mathrm{H_2O} + 4\ e^- = 4\ \mathrm{HO^{-}(aq)}$ • Faraday constant $F = 96{,}5\times10^3\ \mathrm{C\cdot mol^{-1}}$ • Avogadro constant $N_A = 6{,}02\times10^{23}\ \mathrm{mol^{-1}}$ • Elementary charge $e = 1{,}602\times10^{-19}\ \mathrm{C}$ • Molar mass of aluminium $M_{Al} = 27{,}0\ \mathrm{g\cdot mol^{-1}}$ • The electric capacity $Q$ of a cell is related to the current intensity $I$ of the electric current delivered and to the operating time $\Delta t$ by the relation: $Q = I\cdot \Delta t$. B.1. Write the equation of the reaction modelling the chemical corrosion of aluminium by dissolved dioxygen. The theoretical study of electron transfer between the aluminium anode and the structure of a wind turbine shows that effective protection corresponds to an electric current of intensity $I$ of the order of 400 A. B.2. By explaining the reasoning, calculate the mass of aluminium needed for “cathodic protection” over a period of 25 years. B.3. Give at least one argument explaining why the manufacturer finally gave up protection by sacrificial anode.
⏳ Solution not generated yet

Open this statement in Expert Maths AI: the step-by-step solution is computed on demand, checked by a second resolution, then published here for everyone.

📝 See the solution

Have a similar exercise? Get it solved step by step, for free.

🧮 Solve my exercise