Solved exercises🧮 Solve my exercise

Baccalauréat 2021 — Physics-Chemistry specialty, Asie (jour 2) remplacement — exercise 1 : Urea and the synthesis of barbituric acid (official exam paper)

PhysicsLevel : High schoolUrea and the synthesis of barbituric acid🌐 Lire en français
Statement
Urea is a white solid, soluble in water, that forms in the liver through the breakdown of amino acids. Urea is filtered by the kidneys and eliminated from the body in urine. Urea can be used to synthesize barbituric acid, which is necessary for the preparation of barbiturate drugs. Part 1 is devoted to the study of this synthesis. In addition, knowing the amount of urea present in urine is important for monitoring the progression of certain diseases. In part 2, the kinetic characteristics of a key step in the assay of urea are studied. Molecular figure: urea is represented by the structural formula $\mathrm{O=C(NH_2)_2}$. The two parts are independent. Part 1 – Synthesis of barbituric acid from urea Barbituric acid and, more generally, barbiturates are a group of drugs that act on the nervous system. Today, barbituric acid is synthesized from urea and diethyl malonate. Molecular figures: diethyl malonate is represented by a chain $\mathrm{CH_3-CH_2-O-C(=O)-CH_2-C(=O)-O-CH_2-CH_3}$. Barbituric acid is represented by a six-membered ring containing two $\mathrm{NH}$ nitrogen atoms and three carbonyl groups $\mathrm{C=O}$. The synthesis of barbituric acid is modeled by reaction (1) with equation: $\mathrm{CH_4N_2O + C_7H_{12}O_4 \longrightarrow C_4H_4N_2O_3 + 2\ C_2H_6O}$ (reaction 1) In words: urea + diethyl malonate $\longrightarrow$ barbituric acid + ethanol. Data at 25°C Table: - Urea: appearance: white solid; solubility: very soluble in distilled water, both hot and cold; molar mass: $60,0\ \mathrm{g\cdot mol^{-1}}$; density: -. - Diethyl malonate: appearance: colorless liquid; solubility: very soluble in distilled water, both hot and cold; molar mass: $160,0\ \mathrm{g\cdot mol^{-1}}$; density: $1,05\ \mathrm{g\cdot mL^{-1}}$. - Barbituric acid: appearance: white solid; solubility: very soluble in distilled water when hot and much less soluble when cold. Slightly soluble in ethanol; molar mass: $128,0\ \mathrm{g\cdot mol^{-1}}$; density: -. - Ethanol: appearance: colorless liquid; solubility: very soluble in distilled water, both hot and cold; molar mass: $46,1\ \mathrm{g\cdot mol^{-1}}$; density: $0,789\ \mathrm{g\cdot mL^{-1}}$. Barbituric acid is denoted HA and its conjugate base $\mathrm{A^-}$. As an ionic species, this conjugate base is soluble in water. The $pK_A$ of the acid/base pair of barbituric acid is 4,08. 1. Write the semi-developed formula of diethyl malonate. 2. On the previous formula, circle the characteristic group(s) of diethyl malonate and name the corresponding functional family/families. Synthesis of barbituric acid Barbituric acid can be synthesized from urea in a strongly basic medium, according to the following protocol: (a) In a very dry flask, dissolve 1,5 g of urea (0,025 mol) and 0,5 g of sodium in 10 mL of ethanol while heating, then add 6,5 mL of diethyl malonate. (b) Reflux the mixture. (c) After heating and cooling, add 10 mL of concentrated hydrochloric acid ($\mathrm{H_3O^+(aq),\ Cl^-(aq)}$). Allow to cool by immersing the flask in a crystallizing dish containing water at 5°C: white (slightly yellowish) crystals of barbituric acid slowly appear. Perform vacuum filtration then rinse the crystals with ice-cold water. (d) Carry out purification by recrystallization; to do this, collect the crystals in an Erlenmeyer flask, dissolve them in a minimum amount of boiling distilled water and let them cool slowly first in air and then in an ice-water bath. Filter again, rinse with ice-cold water, dry the crystals and place them in an oven on a pre-weighed watch glass. (e) Weigh the dry crystals. After carrying out this protocol, the mass of dry recrystallized product obtained is $m_b = 2,6\ \mathrm{g}$. 3. State the two advantages of reflux heating in this synthesis. 4. Explain the appearance of barbituric acid crystals during step (c). 5. Show that urea is the limiting reagent in the synthesis. 6. Determine the theoretical mass $m_{bth}$ of barbituric acid that could be obtained if the synthesis were complete. 7. Express and then calculate the yield $\eta$ of this synthesis. Suggest explanations for why the yield is less than 100%. Suggest a strategy to increase it. Checking the purity of the recrystallized product for barbituric acid To determine the purity of the product obtained, a solution of volume $V = 100,0\ \mathrm{mL}$ of barbituric acid solution is prepared by dissolving 1,00 g of recrystallized product obtained from the previous synthesis. Then, $100,0\ \mathrm{mL}$ of the prepared barbituric acid solution is titrated with a sodium hydroxide ($\mathrm{Na^+(aq),\ HO^-(aq)}$) solution of concentration $C_B = 5,00 \times 10^{-1}\ \mathrm{mol\cdot L^{-1}}$. The titration is monitored by pH-metry. The graph reproduced in Figure 1 is obtained. Figure 1: evolution of the pH of the solution as a function of the volume of sodium hydroxide solution added. The graph shows two curves as a function of the added volume $V$ (in mL), from 0,0 to 25,0 mL: the curve $\mathrm{pH}=f(V)$ and the curve $\frac{d\mathrm{pH}}{dV}=f(V)$. The vertical pH axis is graduated from 0 to 14. The pH curve starts at about pH 3,1 at $V=0,0\ \mathrm{mL}$, increases slowly to about pH 4,8 at around $14\ \mathrm{mL}$, then shows a jump around $V \simeq 15,6\ \mathrm{mL}$, going from about pH 6 to pH 10, before increasing slowly to pH 11,5 at $25,0\ \mathrm{mL}$. The derivative curve shows a narrow, high peak centered around $V \simeq 15,6\ \mathrm{mL}$, which indicates the equivalence volume. 8. Using the notation HA(aq) for barbituric acid in aqueous solution and the experimental results, write the equation for the titration reaction. 9. Sketch and label the apparatus used to titrate barbituric acid with the sodium hydroxide solution. 10. Recall the definition of the equivalence point of a titration. 11. From the titration results, determine the mass of barbituric acid present in 1,00 g of recrystallized solid. 12. State whether recrystallization was satisfactory. Justify. Part 2 – Study of the kinetics of urea hydrolysis In the context of medical monitoring, it may be necessary to control the urea content in urine. One method for carrying out this assay consists first in hydrolyzing urea into ammonium and carbonate ions. It is the ammonium ions formed that are then analyzed in order to infer the initial urea concentration. In this assay process, the hydrolysis of urea is a slow transformation. An experimental study is carried out to establish the kinetic characteristics of this transformation and how to optimize it. To simplify the study, urea hydrolysis is modeled by reaction (2) with equation: $\mathrm{CH_4N_2O(aq) + 2\ H_2O(l) \rightarrow 2\ NH_4^+(aq) + CO_3^{2-}(aq)}$ (reaction 2) Water is in large excess. The variation over time of the amount-of-substance concentration of urea, $[\mathrm{urée}]_t$, in a diluted aqueous solution maintained at the constant temperature of 37 °C is monitored. The measurements and their processing made it possible to plot the graphs in Figures 2 and 3 in the appendix on page 15/16 TO BE SUBMITTED WITH THE ANSWER SHEET. These figures are not included in the pages provided. 13. Based on the experimental results, state whether the hydrolysis of urea is complete or not. Justify. 14. Likewise, state whether this transformation is fast or slow. 15. Determine the initial urea concentration $[\mathrm{urée}]_0$ and estimate the value of the half-life time $t_{1/2}$. Explain the method. 16. Discuss whether it is possible to implement the urea assay described in the introduction to part 2 in view of the time evolution characteristics of urea hydrolysis. To refine the characterization of the kinetics of this transformation, we seek to identify its rate law. 17. Define the volumetric rate of disappearance of urea as a function of the urea concentration, $[\mathrm{urée}]_t$. 18. Show that the experimental results are consistent with a first-order rate law for the evolution of the volumetric rate of disappearance of urea. Justify. 19. Let $k$ denote the rate constant of this law. Determine the value of $k$. Hydrolysis can be carried out in the presence of an enzyme: urease. The results of two urea hydrolysis experiments are summarized in the following table. Table: - Experiment: without the enzyme urease; temperature: 310 K; rate constant $k$ in $\mathrm{j^{-1}}$ (with j = day): $2,2 \times 10^{-3}$. - Experiment: with the enzyme urease; temperature: 310 K; rate constant $k$ in $\mathrm{j^{-1}}$ (with j = day): $8,0 \times 10^9$. When the time evolution of the concentration follows a first-order kinetic law, $t_{1/2}$ and $k$ are related by: $t_{1/2} = \dfrac{\ln 2}{k}$ 20. Knowing that all of the urease is recovered at the end of the hydrolysis, state its role during this hydrolysis. 21. Compare the time scales associated with urea hydrolysis with and without urease. Conclude regarding the optimization sought for urea hydrolysis.
⏳ Solution not generated yet

Open this statement in Expert Maths AI: the step-by-step solution is computed on demand, checked by a second resolution, then published here for everyone.

📝 See the solution

Have a similar exercise? Get it solved step by step, for free.

🧮 Solve my exercise