Baccalauréat 2021 — Physics-Chemistry specialty, Centres étrangers - Groupe 1 (jour 2) remplacement — exercise 1 : Parachute Jump Training (official exam paper)
Statement
During one of the stages of his training, a student parachutist must learn to estimate for himself the time after which he must activate the parachute-opening control, a few seconds after jumping from the aircraft. In an emergency, a reserve parachute deploys automatically. But before jumping, the student and his instructor must be able to hear each other speaking in the aircraft!
Data:
- Mass of the student parachutist and his equipment: $m = 75,0\ \mathrm{kg}$.
- Magnitude of the gravitational field $g = 9,81\ \mathrm{m\cdot s^{-2}}$.
Part 1 – Communication in the noisy aircraft environment
In the aircraft carrying the instructor and his student to the desired altitude, the sound intensity level is $L_1 = 82\ \mathrm{dB}$. It is estimated that, for two simultaneous sound emissions, the sound intensity levels must differ by at least 8 dB so that the weaker sound does not prevent the louder sound from being heard clearly.
Data:
The sound intensity level $L$ (dB) and the sound intensity $I$ are related by the relation: $L = 10\log\dfrac{I}{I_0}$ with $I_0 = 1,0\times10^{-12}\ \mathrm{W\cdot m^{-2}}$, audibility threshold;
It is estimated that one must shout to produce a sound with sound intensity equal to or greater than $I_C = 1,0\times10^{-3}\ \mathrm{W\cdot m^{-2}}$.
1. State the minimum sound intensity level $L_2$ that the conversation between the instructor and his student must have so that they can hear each other clearly despite the aircraft noise.
2. Indicate, with justification, whether the disturbance caused by the aircraft noise requires the instructor and his student to shout or not.
Given the sound intensity level in the aircraft, pilots use ANR aviation headsets (for Active Noise Reduction), also called active headsets, to facilitate communication. The operation of these headsets relies on an electronic technology that makes it possible to capture outside noise via a microphone placed on the headset shell, and to emit, in the headset earphone, a signal that is superimposed on the aircraft noise so as to reduce it.
3. Name the physical phenomenon exploited by ANR technology.
To illustrate the principle of an ANR headset in the laboratory, a microphone is placed in front of two loudspeakers. The first loudspeaker produces a sound modeling aircraft noise by a single-frequency signal. Document 1 provided in the appendix shows the time evolution of the voltage $u_1$ across the microphone. [Document 1 in appendix page 16/16 mentioned in the subject but not provided in the transmitted pages.]
4. On Document 1 in the appendix page 16/16 to be handed in with the copy, sketch the shape of the signal that the second loudspeaker must produce in order to "cancel" the sound modeling aircraft noise.
Part 2 – Experimental determination of the altitude at the moment the parachute opens
The student parachutist and his instructor leave the aircraft simultaneously at a point A, at altitude $z_A = 1\ 500\ \mathrm{m}$. Throughout the jump, the instructor remains at the same altitude as his student. When the student opens his parachute, the instructor notes the value of the altitude $z_B$ indicated by his altimeter. This value will be useful for the debriefing after the jump.
The operating principle of the altimeter is based on measuring a pressure variation from which an altitude variation is deduced. This part focuses on a model for determining an altitude variation from measuring a pressure variation.
Data:
- According to the fundamental law of hydrostatics, the pressure variation between altitudes $z$ and $z+h$ is related to the altitude variation $h$ by the relation: $p(z)-p(z+h)=\rho g h$ with $p$ in Pa, $h$ in m, $g$ the magnitude of the terrestrial gravitational field and $\rho$ the mass density of air in $\mathrm{kg\cdot m^{-3}}$;
- Absolute temperature scale: $T\ (\mathrm{K}) = \theta\ ({}^\circ\mathrm{C}) + 273,15$ ;
- Ideal gas constant: $R = 8,314\ \mathrm{Pa\cdot m^3\cdot mol^{-1}\cdot K^{-1}}$ ;
- Molar mass of air: $M = 29,0\ \mathrm{g\cdot mol^{-1}}$ ;
- At altitude $z_A = 1\ 500\ \mathrm{m}$, the pressure is $p_A = 845\ \mathrm{hPa}$ and the temperature is $\theta_A = 5,5\ ^\circ\mathrm{C}$.
In the situation studied, air may be considered an ideal gas.
5. Using the equation of state of ideal gases, show that the mass density of air at altitude $z_A = 1\ 500\ \mathrm{m}$ has the value $\rho = 1,06\ \mathrm{kg\cdot m^{-3}}$.
It is assumed that this value of the air mass density is constant over the fall height considered.
Between point A and the opening of the parachute, the altimeter measured a pressure difference of 31,8 hPa.
6. Determine the altitude $z_B$ that the altimeter would display if it used the fundamental law of hydrostatics.
Remark: In practice, altimeters use another model and another relation between pressure variation and altitude (barometric leveling formula) because temperature as well as the mass density of air vary with altitude.
Part 3 – Theoretical determination of the altitude when the parachute opens
The student parachutist and his instructor leave the aircraft simultaneously at a point A, at an instant taken as the origin of time ($t = 0\ \mathrm{s}$). When they jump from the aircraft, it is flying horizontally at altitude $z_A = 1\ 500\ \mathrm{m}$ with speed $v_A = 130\ \mathrm{km\cdot h^{-1}}$.
The student is instructed to trigger the opening of his parachute after counting 10 seconds.
The motion of the system {parachutist + equipment} is studied before the parachute opens. This study is carried out in the terrestrial reference frame considered to be inertial.
In this part, to model the motion of the parachutist, it is assumed that the actions of the air are negligible and that the motion of the system is planar.
The position of the parachutist is specified in the coordinate system $(O,x,z)$, with origin O taken at ground level, which here also corresponds to sea level. Point A is located vertically above point O on the $(Oz)$ axis.
Figure 1: diagram of the reference frame. The $x$ axis is horizontal to the right, the $z$ axis is vertical upward. Point O is at ground level at the origin. Point A is on the vertical axis at altitude $z_A$; the initial velocity vector $\vec v_A$ is horizontal to the right at point A.
7. Indicate the action(s) exerted on the parachutist and model them by a force or forces.
8. Deduce, with justification, the theoretical coordinates of the acceleration vector $a_x(t)$ and $a_z(t)$ and the expressions for the coordinates $v_x(t)$ and $v_z(t)$ of the velocity vector of the center of mass of the system.
9. Show that the time equations of the parachutist’s motion in the frame $(O,x,z)$ are modeled by: $\begin{cases}x(t)=v_A t\\ z(t)=-\dfrac{1}{2}gt^2+z_A\end{cases}$ with $t$ in seconds, $v_A$ in meters per second and $x(t)$, $z(t)$ and $z_A$ in meters.
10. Determine the theoretical altitude $z_C$ at which the parachutist should open his parachute knowing that this opening must take place 10 s after the jump.
The instructor’s altimeter indicates $z_B = 1,2\times10^3\ \mathrm{m}$ when the student opens his parachute.
11. Suggest at least two reasons to explain the difference between the measured value $z_B$ and the calculated value $z_C$.
Part 4 – Reserve parachute
If the parachute does not open, the falling speed can reach $200\ \mathrm{km\cdot h^{-1}}$. A safety device must then deploy the reserve parachute. To be fully operational, it must satisfy the following two conditions:
- It must activate before the altitude becomes less than 320 m (altitude condition).
- It must make it possible to go from $200\ \mathrm{km\cdot h^{-1}}$ to less than $20\ \mathrm{km\cdot h^{-1}}$ in 10 s (speed condition).
Once the reserve parachute is opened, air resistance is no longer negligible. It is modeled by a force, denoted $\vec f$, opposite in direction to the velocity vector and with magnitude proportional to the square of the speed: $f=kv^2$.
$k$ is called the drag coefficient.
This modeling of drag made it possible to plot the graph showing the evolution of the speed of the center of mass of the system {parachutist + equipment} (figure 2). On this graph, the origin of time corresponds to the opening of the reserve parachute. In the following, the motion is considered vertical from the date of opening of the reserve parachute until the date of arrival on the ground.
Figure 2: evolution of the speed value $v$ of the system, in the terrestrial reference frame, after the reserve parachute opens. Graph of $v$ in $\mathrm{m\cdot s^{-1}}$ as a function of $t$ in s. Horizontal axis marked from 0 to 12 s; vertical axis marked from 0 to 60 $\mathrm{m\cdot s^{-1}}$. The curve decreases rapidly from about $56\ \mathrm{m\cdot s^{-1}}$ at $t=0$ then tends toward a value close to $5\ \mathrm{m\cdot s^{-1}}$. Approximate readable values: $v(1\ \mathrm{s})\approx18\ \mathrm{m\cdot s^{-1}}$, $v(2\ \mathrm{s})\approx10\ \mathrm{m\cdot s^{-1}}$, $v(4\ \mathrm{s})\approx6,7\ \mathrm{m\cdot s^{-1}}$, $v(6\ \mathrm{s})\approx5,6\ \mathrm{m\cdot s^{-1}}$, $v(8\ \mathrm{s})\approx5,1\ \mathrm{m\cdot s^{-1}}$, $v(10\ \mathrm{s})\approx5,0\ \mathrm{m\cdot s^{-1}}$.
12. Show that the model does indeed account for the reserve parachute operating condition concerning speed.
We seek to determine the characteristics of the acceleration vector 2 s after the reserve parachute is deployed. To do this, we must first recover the value of the drag coefficient $k$ used in this model.
13. Write the relation between the acceleration vector $\vec a$ of the system and the forces modeling the actions exerted on the system.
After the date $t = 9\ \mathrm{s}$, the speed may be considered to take a constant value $v_f$.
14. From this date, write the relation between the values of the forces and deduce the expression for the drag coefficient $k$ as a function of $m$, $g$ and $v_f$.
15. Deduce the value of the drag coefficient $k$ chosen for the model. State the unit of $k$.
16. Give the characteristics (direction, line of action, and magnitude) of the acceleration vector of the system at the date $t = 2\ \mathrm{s}$. Comment.
⏳ Solution not generated yet
Open this statement in Expert Maths AI: the step-by-step solution is computed on demand, checked by a second resolution, then published here for everyone.
📝 See the solutionHave a similar exercise? Get it solved step by step, for free.
🧮 Solve my exercise