Baccalauréat 2021 — Physics-Chemistry specialty, Centres étrangers - Groupe 1 (jour 2) remplacement — exercise 3 : Exercise B: Synthesis of a food flavoring (official exam paper)
Statement
Keywords: chemical synthesis, optimizing a synthesis.
For economic reasons, the rum flavoring in industrial products is often of synthetic origin. Ethyl methanoate is a food additive with a rum-like odor. It is obtained by the reaction between methanoic acid and ethanol. This chemical transformation is modeled by the following reaction equation:
$\mathrm{CH_2O_2(\ell) + C_2H_6O(\ell) \rightleftharpoons C_3H_6O_2(\ell) + H_2O(\ell)}$ with $\mathrm{H_2SO_4}$ indicated above the arrow.
The aim of the exercise is to compare two protocols for carrying out this synthesis.
Data:
Characteristics of the reactants and products at 25 °C:
Table:
- Methanoic acid: molecular formula $\mathrm{CH_2O_2}$; density $1,22\ \mathrm{g\cdot cm^{-3}}$; boiling point $100,7\ ^\circ\mathrm{C}$ at $P_{atm}$; molar mass $46,0\ \mathrm{g\cdot mol^{-1}}$.
- Ethanol: molecular formula $\mathrm{C_2H_6O}$; density $0,79\ \mathrm{g\cdot cm^{-3}}$; boiling point $78,5\ ^\circ\mathrm{C}$ at $P_{atm}$; molar mass $46,0\ \mathrm{g\cdot mol^{-1}}$.
- Ethyl methanoate: molecular formula $\mathrm{C_3H_6O_2}$; density $0,91\ \mathrm{g\cdot cm^{-3}}$; boiling point $54,3\ ^\circ\mathrm{C}$ at $P_{atm}$; molar mass $74,0\ \mathrm{g\cdot mol^{-1}}$.
- Water: molecular formula $\mathrm{H_2O}$; density $1,00\ \mathrm{g\cdot cm^{-3}}$; boiling point $100,0\ ^\circ\mathrm{C}$ at $P_{atm}$; molar mass $18,0\ \mathrm{g\cdot mol^{-1}}$.
Infrared spectroscopy (IR):
Table of bands:
- O-H in the gas phase: $\sigma = 3500 - 3700\ \mathrm{cm^{-1}}$; intensity and width: medium, narrow.
- O-H in the condensed phase: $\sigma = 3200 - 3400\ \mathrm{cm^{-1}}$; intensity and width: strong, broad.
- O-H of a carboxylic acid: $\sigma = 2500 - 3200\ \mathrm{cm^{-1}}$; intensity and width: medium to strong, broad.
- C-H of the $\mathrm{CH_2}$, $\mathrm{CH_3}$, CH groups: $\sigma = 2900 - 3100\ \mathrm{cm^{-1}}$; intensity and width: medium to strong, variable (multiple bands).
- C=O of a carboxylic acid: $\sigma = 1680 - 1710\ \mathrm{cm^{-1}}$; intensity and width: strong, narrow.
- C=O aldehyde and ketone: $\sigma = 1650 - 1730\ \mathrm{cm^{-1}}$; intensity and width: strong, narrow.
- C=O ester: $\sigma = 1700 - 1740\ \mathrm{cm^{-1}}$; intensity and width: strong, narrow.
- C-O ester: $\sigma = 1050 - 1300\ \mathrm{cm^{-1}}$; intensity and width: strong, narrow.
Protocol 1:
In a 250 mL flask containing 1,20 mol of ethanol, four drops of concentrated sulfuric acid solution ($\mathrm{H_2SO_4}$) and a few boiling chips, 1,20 mol of methanoic acid is added. The mixture is heated under reflux until all the ester possible has been obtained. At the final state, the reaction mixture contains 0,40 mol of methanoic acid, 0,40 mol of ethanol, 0,80 mol of ethyl methanoate and 0,80 mol of water.
Protocol 2:
In a flask, 37,7 mL of methanoic acid, 29,1 mL of ethanol and 5 mL of concentrated sulfuric acid are mixed. The mixture is distilled. The temperature at the top of the column first rises and then stabilizes around 55 °C. The collection of the distillate is stopped as soon as the temperature starts to rise again. A volume of 32 mL of distillate is obtained, and its mass is measured; a value of 29,0 g is obtained.
1. Write the structural formulas of methanoic acid, ethanol and the ester involved in the synthesis.
2. State two factors used in these two protocols to improve the kinetics of the synthesis.
Setups used
Figure 1: setup for one of the two synthesis protocols. Diagram of a distillation: a heated flask is connected vertically to a distillation column (element ①) at the top of which there is a thermometer; an inclined water condenser (element ②) carries the condensed vapors toward a receiving Erlenmeyer flask. Arrows indicate the flow of water in the condenser.
3. State which of the two protocols corresponds to the diagram in Figure 1.
4. Give the names of the glassware elements numbered ① and ② in the setup in Figure 1.
Comparison of the yields of the two protocols
From protocol 1:
5. Justify, without calculation, that the synthesis is not a complete transformation.
6. Construct an extent-of-reaction table showing the final extent $x_f$.
7. Define the yield of the chemical transformation studied. Calculate the yield $\eta_1$ for this first protocol.
The yield $\eta_2$ of protocol 2 is 78 %. It is greater than $\eta_1$.
8. Propose two arguments to justify the fact that $\eta_2$ is greater than $\eta_1$.
Identification of the product of protocol 2
We want to make sure that the distillate obtained in protocol 2 is made of ethyl methanoate.
9. Note one observation during the experiment that makes it possible to account for the fact that the distillate is made of ethyl methanoate.
10. Determine the density of the distillate and discuss the result obtained.
11. The infrared spectrum of the distillate obtained during the implementation of protocol 2 is shown in Figure 2. Discuss the compatibility of this spectrum with the expected chemical species in the distillate.
Figure 2: infrared spectrum of the distillate. Graph of transmittance as a function of wavenumber in $\mathrm{cm^{-1}}$. The wavenumber axis decreases from left to right, with main marks around 3000, 2000 and 1000 $\mathrm{cm^{-1}}$. The spectrum shows marked absorption bands around 3000 $\mathrm{cm^{-1}}$ (C-H bonds), a very intense and narrow band near about 1740 $\mathrm{cm^{-1}}$ (ester C=O), and several strong bands in the region about 1050–1300 $\mathrm{cm^{-1}}$ (ester C-O). It does not show a broad O-H band characteristic of 3200–3400 $\mathrm{cm^{-1}}$ nor a broad carboxylic acid band 2500–3200 $\mathrm{cm^{-1}}$.
⏳ Solution not generated yet
Open this statement in Expert Maths AI: the step-by-step solution is computed on demand, checked by a second resolution, then published here for everyone.
📝 See the solutionHave a similar exercise? Get it solved step by step, for free.
🧮 Solve my exercise