Baccalauréat 2021 — Physics-Chemistry specialty, Métropole, Mayotte, La Réunion, Antilles Guyane (jour 2) — exercise 1 : Towards the synthesis of Plexiglas (official exam paper)
Statement
TOWARDS THE SYNTHESIS OF PLEXIGLAS
Polymethyl methacrylate (PMMA) is a transparent thermoplastic polymer. Discovered in 1877, it has been produced industrially since 1933 in Germany from methyl methacrylate (MMA), under the trade name Plexiglas®. This material can replace glass for certain applications such as protective screens, for example.
The aim of this exercise is to study the synthesis of MMA, then that of PMMA.
Introductory document in the form of a table with three columns.
- Column “Monomer”: common acronym: MMA; common name: methyl methacrylate; official nomenclature: methyl 2-methylpropenoate; structure: unsaturated ester $\mathrm{CH_2=C(CH_3)-COOCH_3}$.
- Column “Polymer”: common acronym: PMMA; common name: polymethyl methacrylate; official nomenclature: poly(methyl 2-methylpropenoate); structure: partial chain polymer bearing methyl ester groups, motif $[-\mathrm{CH_2-C(CH_3)(COOCH_3)}-]_n$.
- Column “Example of an object made of plexiglas”: photograph of a transparent mobile protective screen made of plexiglas.
1. Study of methacrylic acid
Methacrylic acid can be used as a reactant in the synthesis of MMA.
Data on methacrylic acid:
- name in the official nomenclature: 2-methyl-2-propenoic acid;
- semi-developed formula: $\mathrm{CH_2=C(CH_3)-COOH}$;
- molecular molar mass: $M = 86.1\ \mathrm{g\cdot mol^{-1}}$;
- $pK_A$, at 25 °C, of the methacrylic acid / methacrylate ion pair: 4.7.
Extracts from the safety data sheet for methacrylic acid:
- Labelling: hazard pictograms “corrosive” and “acute toxicity”.
- Hazard statements: harmful if swallowed or inhaled; toxic in contact with skin; causes skin burns and serious eye damage; may irritate the respiratory tract.
- Physical and chemical properties: liquid form, colourless, unpleasant odour; melting point: 15 °C; boiling point: 161 °C. Source: after www.merckgroup.com.
1.1. State the operating precautions and safety equipment needed to handle methacrylic acid. Justify your answer.
1.2. Draw, on your paper, the skeletal formula of methacrylic acid and circle the characteristic groups.
1.3. Justify that the methacrylic acid molecule is an acid in the Brønsted sense and write the associated acid-base pair.
1.4. Write the equation for the reaction of methacrylic acid, denoted HA, in water.
1.5. Give the relationship between the acidity constant $K_A$ of the methacrylic acid / methacrylate ion pair denoted HA / A− and the equilibrium molar concentrations of the chemical species HA and A−.
1.6. Verify, by quantitative reasoning, that the pH value of an aqueous solution of methacrylic acid with concentration $c_m = 100\ \mathrm{g\cdot L^{-1}}$ is 2.3.
2. Synthesis of the monomer: methyl methacrylate (MMA)
Methyl methacrylate is an ester that can be prepared in the laboratory by reaction between methacrylic acid and methanol. This transformation is very slow in the absence of a catalyst and is not complete. One possible operating protocol is described below.
Step a. In accordance with safety instructions, place 10.0 g of methacrylic acid in a 100 mL flask. Add 35 mL of methanol then add drop by drop 2 mL of concentrated sulfuric acid. Attach a condenser then heat the reaction mixture under reflux for 30 minutes while stirring.
Step b. Cool the reaction mixture then pour it into 50 mL of ice-cold water. Transfer everything into a separatory funnel and carry out two successive extractions with 25 mL of diethyl ether. Combine the organic phases then wash them successively with 30 mL of ice-cold water, 50 mL of a 5% sodium hydrogencarbonate solution, then 30 mL of a saturated sodium chloride solution. Dry the organic phase over anhydrous magnesium sulfate.
Step c. Set up a fractional distillation apparatus. Collect the distilled fraction corresponding to MMA and measure the mass of the liquid obtained.
Data: table of species.
- Methacrylic acid: molecular formula $\mathrm{C_4H_6O_2}$; boiling point $\theta_{eb}=161\ ^\circ\mathrm{C}$; $M=86.1\ \mathrm{g\cdot mol^{-1}}$; density at 20 °C: 1.02; solubility: soluble in water.
- Methanol: semi-developed formula $\mathrm{CH_3-OH}$; $\theta_{eb}=65\ ^\circ\mathrm{C}$; $M=32.0\ \mathrm{g\cdot mol^{-1}}$; density at 20 °C: 0.79; solubility: soluble in water.
- Diethyl ether: semi-developed formula $\mathrm{CH_3-CH_2-O-CH_2-CH_3}$; $\theta_{eb}=35\ ^\circ\mathrm{C}$; $M=74.1\ \mathrm{g\cdot mol^{-1}}$; density at 20 °C: 0.71; solubility: slightly soluble in water.
- Methyl methacrylate: skeletal formula corresponding to $\mathrm{CH_2=C(CH_3)-COOCH_3}$; $\theta_{eb}=101\ ^\circ\mathrm{C}$; $M=100.1\ \mathrm{g\cdot mol^{-1}}$; density at 20 °C: 0.94; solubility: slightly soluble in water, soluble in diethyl ether.
2.1. Draw a labelled diagram of the reflux setup used in step a and propose a name for this step of the protocol.
2.2. Establish the equation for the reaction modelling the synthesis, knowing that water is produced during this transformation.
2.3. Justify the relative positions of the organic and aqueous phases during the washing with ice-cold water, in the separatory funnel, in step b. Specify the composition of each phase.
2.4. State the role of step c, and indicate what must be monitored to ensure that MMA is collected during the fractional distillation.
2.5. Determine the amounts of matter of the reactants introduced.
2.6. Assuming the transformation is complete, determine the maximum mass of methyl methacrylate that can be obtained.
2.7. Indicate one method used to optimize the rate of appearance of MMA and one method used to optimize the yield of this synthesis.
3. Synthesis and properties of the polymer: polymethyl methacrylate (PMMA)
Polymethyl methacrylate is a linear macromolecule (see Figure 1) produced by chemical transformation of methyl methacrylate. This transformation is called polymerization.
Figure 1. Partial structure of the PMMA polymer: linear carbon chain with repetition of the motif $[-\mathrm{CH_2-C(CH_3)(COOCH_3)}-]$; the ends are indicated by wavy bonds.
Data:
- Absorption bands in infrared spectroscopy (IR): O−H bond of carboxylic acid: wavenumber $\sigma = 2500-3200\ \mathrm{cm^{-1}}$; $\mathrm{C_{tét}-H}$ bond: $2800-3000\ \mathrm{cm^{-1}}$; C=O bond: $1650-1750\ \mathrm{cm^{-1}}$; C=C bond: $1620-1690\ \mathrm{cm^{-1}}$; $\mathrm{C_{tét}-O}$ bond: $1050-1450\ \mathrm{cm^{-1}}$.
- Infrared spectra: for the MMA monomer, transmittance spectrum from 4000 to about 1000 $\mathrm{cm^{-1}}$, with in particular a strong C=O band around 1720 $\mathrm{cm^{-1}}$, bands around 3000 $\mathrm{cm^{-1}}$, a band associated with C=C around 1640 $\mathrm{cm^{-1}}$ and several bands between 1500 and 1000 $\mathrm{cm^{-1}}$; source: NIST. For the PMMA polymer, transmittance spectrum from 4000 to about 1000 $\mathrm{cm^{-1}}$, with a strong C=O band around 1730 $\mathrm{cm^{-1}}$, bands around 3000 $\mathrm{cm^{-1}}$, intense bands between 1500 and 1000 $\mathrm{cm^{-1}}$, and disappearance of the C=C band of the monomer; source: https://nanopdf.com.
3.1. Represent the polymer repeat unit.
3.2. Justify why the transformation can be monitored by infrared spectroscopy.
Among the processes implemented industrially, one provides gentle conditions that are environmentally friendly and relatively high rates. The kinetic study in Figure 2 presents experimental results obtained under optimal operating conditions to control the synthesis, that is, to obtain polymer chains of large lengths and homogeneous sizes. The volumetric rate of disappearance of the MMA monomer is denoted $v_p$.
Figure 2. Experimental results. Table: time $t$ in h, concentration $[\mathrm{MMA}]$ in $\mathrm{mmol\cdot L^{-1}}$, rate $v_p$ in $\mathrm{mmol\cdot L^{-1}\cdot h^{-1}}$.
- $t=0$ : $[\mathrm{MMA}]=518$, $v_p=v_{p,0}$.
- $t=1$ : $[\mathrm{MMA}]=311$, $v_p=188$.
- $t=2$ : $[\mathrm{MMA}]=123$, $v_p=55.0$.
- $t=3$ : $[\mathrm{MMA}]=68.0$, $v_p=25.0$.
- $t=4$ : $[\mathrm{MMA}]=43.0$, $v_p=20.1$.
- $t=5$ : $[\mathrm{MMA}]=22.9$, $v_p=8.50$.
- $t=6$ : $[\mathrm{MMA}]=14.4$, no value of $v_p$ indicated. Source: after ACS Macro Letters.
Figure 3. Graph representing $[\mathrm{MMA}]=f(t)$: horizontal axis time from 0 to 6 h; vertical axis $[\mathrm{MMA}]$ from 0 to 600 $\mathrm{mmol\cdot L^{-1}}$. Approximate points: (0 ; 518), (1 ; 311), (2 ; 123), (3 ; 68), (4 ; 43), (5 ; 22.9), (6 ; 14.4). Decreasing exponential-type curve.
Figure 4. Graph representing $v_p=f([\mathrm{MMA}])$: horizontal axis $[\mathrm{MMA}]$ from 0 to 600 $\mathrm{mmol\cdot L^{-1}}$; vertical axis $v_p$ from 0 to 250 $\mathrm{mmol\cdot L^{-1}\cdot h^{-1}}$. Approximate points: (22.9 ; 8.50), (43.0 ; 20.1), (68.0 ; 25.0), (123 ; 55.0), (311 ; 188), (518 ; 208 to about 210) ; a rising dashed line passes approximately through the origin and through the trend points.
3.3. Determine the half-reaction time $t_{1/2}$ for the polymerization of MMA using Figure 3. Comment.
3.4. Using Figure 3, estimate, by explaining the method, the value of the disappearance rate $v_p$ of MMA at the initial time.
3.5. By studying the variation of the rate $v_p$ as a function of the MMA concentration in Figure 4, determine whether the time evolution of the MMA concentration follows a first-order rate law.
⏳ Solution not generated yet
Open this statement in Expert Maths AI: the step-by-step solution is computed on demand, checked by a second resolution, then published here for everyone.
📝 See the solutionHave a similar exercise? Get it solved step by step, for free.
🧮 Solve my exercise