Baccalauréat 2021 — Physics-Chemistry specialty, Métropole, Mayotte, La Réunion, Antilles Guyane (jour 2) remplacement — exercise 1 : Flight of a Hot Air Balloon (official exam pap
Statement
FLIGHT OF A HOT AIR BALLOON
A hot air balloon is an air transport vehicle made up of a basket that can contain passengers. Above the basket are:
- a nylon envelope called the balloon, whose volume is considered constant;
- a burner used to carry out the combustion of propane in the dioxygen of air; this propane is stored in cylinders carried in the basket.
Many trips are offered, with an average duration of one hour. A car is required to follow the balloon on the ground to recover the passengers and equipment when landing. Indeed, the landing site cannot be known with certainty at departure time: it depends on weather conditions.
The objectives of this exercise are:
- to determine the total mass that can be carried in the hot air balloon;
- to find the maximum possible flight endurance of the hot air balloon.
Photograph: multicolored hot air balloon in flight above a hilly landscape. Source: pixabay.com.
In this exercise, we study a nylon envelope of model “M-77” with a thickness of 0.1 mm, a volume $V = 2\,200\ \mathrm{m^3}$, to which is attached a basket of model “C-1”, with mass $m_{\text{nacelle}} = 56\ \mathrm{kg}$. The basket can carry up to three people as well as four cylinders each weighing 40 kg and each containing 20 kg of propane.
According to the website https://escholarship.org/
Data:
- acceleration due to gravity on Earth: $g = 9{,}81\ \mathrm{m\cdot s^{-2}}$;
- surface area of the balloon envelope: $S = 847\ \mathrm{m^2}$;
- mass per unit area of the nylon envelope: $\rho_{ ext{nylon}} = 65\ \mathrm{g\cdot m^{-2}}$;
- ideal gas constant: $R = 8{,}314\ \mathrm{J\cdot mol^{-1}\cdot K^{-1}}$;
- molar mass of air: $M_{\text{air}} = 29{,}0\ \mathrm{g\cdot mol^{-1}}$.
1. Determining the total mass that can be carried in the hot air balloon
During a flight, the hot air balloon is at an altitude of 1.5 km. We consider that the pressure $p$ inside the balloon is equal to the pressure outside the balloon. Figure 1 shows how air pressure varies with altitude. Air is considered an ideal gas.
The burner is not operating at the moment when the system is being studied.
Figure 1. Air pressure as a function of altitude. Graph: horizontal axis “Altitude (m)” from 0 to 4 500 m; vertical axis “Pressure (Pa)” from 60 000 to 100 000 Pa. Decreasing scatter plot; approximate values read: at 400 m, $p \approx 96\,500\ \mathrm{Pa}$; 600 m, $94\,500\ \mathrm{Pa}$; 800 m, $92\,000\ \mathrm{Pa}$; 1 000 m, $90\,000\ \mathrm{Pa}$; 1 200 m, $88\,000\ \mathrm{Pa}$; 1 400 m, $86\,000\ \mathrm{Pa}$; 1 600 m, $84\,000\ \mathrm{Pa}$; 1 800 m, $82\,000\ \mathrm{Pa}$; 2 000 m, $80\,000\ \mathrm{Pa}$; 2 200 m, $78\,000\ \mathrm{Pa}$; 2 400 m, $76\,000\ \mathrm{Pa}$; 2 600 m, $74\,500\ \mathrm{Pa}$; 2 800 m, $72\,500\ \mathrm{Pa}$; 3 000 m, $71\,000\ \mathrm{Pa}$; 3 200 m, $69\,000\ \mathrm{Pa}$; 3 400 m, $67\,500\ \mathrm{Pa}$; 3 600 m, $66\,000\ \mathrm{Pa}$; 3 800 m, $64\,500\ \mathrm{Pa}$; 4 000 m, $63\,000\ \mathrm{Pa}$.
1.1. Study of the “balloon” system.
1.1.1. Using the ideal gas equation of state, express the mass density of the air contained in the balloon $\rho_{\text{int}}$ as a function of the pressure $p$, $M_{\text{air}}$, $R$ and $T$, the temperature of the air contained in the balloon.
1.1.2. Show that the value of the mass density of the air contained in the balloon $\rho_{\text{int}}$, when the balloon is at an altitude of 1.5 km, is on the order of $0{,}8\ \mathrm{kg\cdot m^{-3}}$. It is assumed that the temperature of the air inside the balloon at the time the system is being studied is 373 K.
1.2. Study of the “hot air balloon” system.
We follow the motion of the center of mass G of the hot air balloon. We work in the terrestrial reference frame assumed to be Galilean, equipped with a spatial frame $(O ; \vec{i}, \vec{j}, \vec{k})$ shown in Figure 2. The origin at point O is at ground level, at the takeoff point of the hot air balloon.
Figure 2. Coordinate system and associated unit vectors in the terrestrial reference frame. Diagram: horizontal x-axis directed to the right; vertical z-axis directed upward; origin O on the ground; point G is placed above O on the vertical axis; the unit vector $\vec{k}$ is directed upward, a horizontal unit vector is shown to the right.
It is considered that only two forces act on the system {hot air balloon} made up of the basket, its load and the balloon:
- the weight $\vec{P}$;
- the buoyant force modeling the action of air on the balloon: $\vec{P_A} = \rho_{\text{ext}} \times V \times g \times \vec{k}$ where $\rho_{\text{ext}}$ represents the density of the outside air and $V$ represents the total volume of the hot air balloon, which is considered equal to the volume of the balloon.
It is considered that the mass of air present in the balloon is constant and that the hot air balloon, with total mass $m$, remains motionless. At the local temperature and at the flight altitude of 1.5 km, the density of the outside air around the balloon is $1{,}06\ \mathrm{kg\cdot m^{-3}}$ while the density of the air inside the balloon is $0{,}80\ \mathrm{kg\cdot m^{-3}}$.
1.2.1. Represent the two forces acting on the hot air balloon in the case where it is motionless in the terrestrial reference frame, without worrying about scale, using the axis system of Figure 2. Justify.
1.2.2. Give the vector expression of the weight $\vec{P}$ of the hot air balloon.
1.2.3. Establish the vector expression of the buoyant force $\vec{P_A}$ as a function of $g$, $m$ and $\vec{k}$.
1.2.4. Deduce the total mass carried in the basket at this altitude. Comment.
The candidate is invited to take initiative and present the approach followed, even if it did not lead to a result. The approach is assessed and must be presented correctly.
2. Determining the maximum flight endurance of the hot air balloon
In reality, the hot air balloon does not remain at a constant altitude. Its altitude varies around an average altitude, depending on the burner being operated by the pilot. Using the burner is necessary to maintain a constant average altitude.
We consider that the hot air balloon is in flight, stabilized at an average altitude of 1.5 km. The outside temperature is $T_{\text{ext}} = 278\ \mathrm{K}$ during a flight.
We seek to establish the energy balance between the system {air inside the envelope + envelope} and the external environment.
2.1. Name the three modes of heat transfer. Describe these three modes qualitatively.
Figure 3 shows the heat transfers that occur between the system {balloon} and the external environment. Recall that the balloon represents the nylon envelope and the air contained inside. In steady state, the hot air balloon is in thermal equilibrium.
Figure 3. Power balance of the system. Diagram of the hot air balloon envelope with the following fluxes: incoming flux associated with solar and terrestrial radiation $P_{\text{ray reçu}} = 1{,}9\times10^5\ \mathrm{W}$; incoming flux associated with the combustion of propane $P_{\text{comb}}$; outgoing flux by radiation from the envelope $P_r$; outgoing conducto-convective flux $\Phi$; outgoing flux associated with air leaving through the opening of the balloon at its base $P_{\text{ouverture}} = 1{,}8\times10^4\ \mathrm{W}$.
2.2. Using Figure 3, establish a literal relationship between the thermal fluxes involved for the system when the hot air balloon is in thermal equilibrium.
Part of the heat transfer occurs in the form of radiation from the envelope to the external environment.
The radiative thermal flux is calculated using the Stefan-Boltzmann relation: $P_r = \varepsilon \cdot \sigma \cdot S \cdot T^4$ with:
- $P_r$ the radiative thermal flux;
- $\varepsilon$ the constant dimensionless emissivity coefficient for the balloon envelope: $\varepsilon = 0{,}87$;
- $\sigma$ the Stefan constant: $\sigma = 5{,}67\times10^{-8}\ \mathrm{W\cdot m^{-2}\cdot K^{-4}}$;
- $S$ the surface area of the envelope;
- $T$ the surface temperature of the envelope in K.
In addition, the motion of the outside air along the envelope is the source of a thermal flux transferred outward by a conducto-convective phenomenon that can be calculated using the following relation: $\Phi = \dfrac{\Delta T}{R_{\text{th}}}$
- $\Phi$ represents the thermal flux lost by the system by conducto-convection in W;
- $\Delta T$ represents the temperature difference between the envelope and the external environment in K;
- $R_{\text{th}}$ represents the thermal resistance associated with the thermal flux between the envelope and the external environment: $R_{\text{th}} = 3{,}5\times10^{-4}\ \mathrm{K\cdot W^{-1}}$.
According to the study, under these conditions, the temperature of the envelope is $T = 325\ \mathrm{K}$, an intermediate temperature between that of the air inside the balloon and that of the air outside the balloon.
2.3. Calculate the radiative thermal flux $P_r$ emitted by the envelope toward the external environment.
2.4. Calculate the conducto-convective flux $\Phi$.
2.5. Deduce that the value of the thermal flux $P_{\text{comb}}$ associated with the combustion of propane in cruising regime is on the order of $4\times10^5\ \mathrm{W}$.
The thermal flux associated with the combustion of propane is not released continuously. Indeed, propane combustion takes place only when the burner is operating. The mass combustion energy of propane is: $E_{\text{comb}} = 46{,}4\ \mathrm{MJ\cdot kg^{-1}}$.
The pilot operates the burner for a duration $\tau$ according to the operation described in Figure 4.
When the burner is operating, 68 grams of propane are burned each second.
2.6. Show that the thermal flux associated with the combustion of propane when the burner is operating is on the order of $3\times10^6\ \mathrm{W}$.
Figure 4. Propane output flow rate from the burner as a function of time. Graph: vertical axis “Burner flow rate in $\mathrm{g\cdot s^{-1}}$” from 0 to 80; horizontal axis “Time in s” from 0 to 45. The flow rate is 0 then shows square pulses at about $68\ \mathrm{g\cdot s^{-1}}$: first pulse of about 18 s to 20 s, of duration $\tau$ indicated at the top; second pulse of about 38 s to 40 s. A burner period $T_{\text{brûleur}}$ is indicated from 0 to 20 s.
2.7. Under the conditions of the study, determine the maximum flight duration that can be achieved using the propane carried in the hot air balloon. Comment.
The candidate is invited to take initiative and present the approach followed, even if it did not lead to a result. The approach is assessed and must be presented correctly.
⏳ Solution not generated yet
Open this statement in Expert Maths AI: the step-by-step solution is computed on demand, checked by a second resolution, then published here for everyone.
📝 See the solutionHave a similar exercise? Get it solved step by step, for free.
🧮 Solve my exercise