Baccalauréat 2021 — Physics-Chemistry specialty, Métropole, Mayotte, La Réunion, Antilles Guyane (jour 2) — exercise 2 : Exercise A - Bungee Jumping (official exam paper)
Statement
EXERCISE A - BUNGEE JUMPING
Keywords: motion in a uniform gravitational field; mechanical energy.
Bungee jumping is a leisure activity that allows people to feel strong sensations. It consists in jumping into the “void” with the help of an elastic cord attached to the ankles. This jump can be made from a bridge. A photograph shows a jumper attached by the ankles jumping from a bridge. Source: www.istockphoto.com.
A bungee jump takes place in several phases, described below.
- 1st phase: diagram of a bridge, the jumper falls under the bridge; text: “Free fall, the elastic cord is not stretched.”
- 2nd phase: diagram where the vertical elastic cord stretches; text: “The elastic cord starts to stretch, the jumper slows down. When the elastic cord is completely stretched, the jumper stops.”
- 3rd phase: diagram where the elastic cord contracts; text: “The elastic cord contracts, the jumper rises back up, speeding up and then slowing down again.”
These three phases repeat until the jumper is motionless; the total duration of the jump is about one minute.
The aim of this exercise is to evaluate the jumper’s speed at the end of the 1st phase and the maximum length of the elastic cord during the jump.
We study a jump made from a bridge located at a height $H$ of about 50 m above the ground.
Data:
- mass of the person with equipment: $m=80\ \mathrm{kg}$;
- value of the Earth’s gravitational field: $g=9,81\ \mathrm{m\cdot s^{-2}}$;
- length of the unstretched elastic cord: $L_0=8,0\ \mathrm{m}$.
During the 1st phase of the bungee jump, we study the motion of the jumper whose center of mass is denoted S, within the free-fall model. For simplicity, we assume that the motion is vertical. At time $t=0$, the person starts the jump at height $H$ with an initial velocity whose vector $\vec{v_0}$ is vertical and directed downward and has magnitude $v_0$. The study frame is the terrestrial reference frame assumed to be Galilean, equipped with the spatial frame (Ox ; Oz), whose origin O is at ground level. The (Oz) axis is vertical, directed upward, and equipped with the unit vector $\vec{k}$. The situation is sketched opposite: reference frame with O on the ground, x-axis horizontal to the right, z-axis vertical upward; the bridge is at height H; point S is below the attachment point; the elastic cord is represented between H and S.
1. Determine the coordinates of the acceleration vector $\vec{a}(t)$ of S in the frame (Ox ; Oz).
2. Show that the equation of motion along the Oz axis is:
$z(t)=-\dfrac{1}{2}g\cdot t^2-v_0\cdot t+H$.
3. After processing the video of a jump using tracking software and modeling the results, the following equation of motion is obtained:
$z(t)=-4,90\ t^2-1,10\ t+49,8$ with $z$ expressed in m and $t$ expressed in s.
Is the modeling of the experimental results consistent with the expression given in 2.? Justify using two arguments.
4. Calculate the time at which the elastic cord starts to stretch.
5. Deduce the value of the speed reached at that instant.
6. Safety distance
During the jump, the different energies involved in the motion were calculated using the information provided on the jump video. They are represented in Figure 1. Gravitational potential energy is considered to be zero when $z=0$. For one of the energies, the calculations could only be carried out on the 1st phase of the jump (curve A).
Figure 1. Curves representing energies of the system over time. Horizontal axis: time in s from 0 to 4,0. Vertical axis: energies in J from 0 to 45 000. The 1st phase extends from about 0 to 1,1 s; the 2nd phase from about 1,1 s to 2,5 s; the beginning of the 3rd phase from about 2,5 s to 4,0 s.
- Curve A: diamond points, almost horizontal during the 1st phase, around 39 000 J.
- Curve B: cross points; energy decreasing from about 39 000 J at $t=0$ to about 33 000 J at $t=1,1$ s, then continuing to decrease to about 22 500 J around $t=2,5$ s, then rising to about 30 000 J at $t=4,0$ s.
- Curve C: round points; low energy at the start, increasing from about 0 J at $t=0$ to about 5 000 to 6 000 J around $t=1,1$ s, then varying with a maximum of about 8 000 J around 1,6 s, decreasing to almost 0 J around 2,5 s, then rising to about 4 000 J around 3,5 s before dropping slightly.
6.1. Identify among curves A, B, C in Figure 1 the one representing kinetic energy, the one representing gravitational potential energy, and the one representing mechanical energy. Justify these choices.
6.2. Identify the missing information(s) about the physical system studied needed to plot the continuation of curve A for the second and third phases.
6.3. For safety reasons, it is necessary that the elastic cord be chosen so that its extension $\Delta L$ is less than or equal to $4L_0$. Using Figure 1, calculate the maximum distance traveled by the jumper. Conclude.
⏳ Solution not generated yet
Open this statement in Expert Maths AI: the step-by-step solution is computed on demand, checked by a second resolution, then published here for everyone.
📝 See the solutionHave a similar exercise? Get it solved step by step, for free.
🧮 Solve my exercise