Solved exercises🧮 Solve my exercise

Baccalauréat 2021 — Physics-Chemistry specialty, Métropole, Mayotte, La Réunion, Antilles Guyane (jour 2) remplacement — exercise 2 : Exercise A — The Ink and Its Eraser (official

PhysicsLevel : High schoolExercise A — The Ink and Its Eraser🌐 Lire en français
Statement
EXERCISE A - THE INK AND ITS ERASER Keywords: calibration by standardization; chemical kinetics The blue ink used in fountain pens contains, among other substances, aniline blue, which contributes to its color. This is the color that must disappear when using an ink eraser. First, the aim of the exercise is to study aniline blue and determine its mass in an ink cartridge; second, to study the rate at which the ink disappears when it is erased. Photograph: fountain pen nib writing on squared paper. Figure 1. Topological formula of aniline blue in water, $(2\ \mathrm{Na^+(aq)} ; \mathrm{C_{32}H_{25}N_3O_9S_3^{2-}(aq)})$. The molecule shown contains several aromatic rings, sulfonate groups $\mathrm{SO_3^-}$ associated with $\mathrm{Na^+}$, amine groups, and methyl substituents. Figure 2. Color wheel: violet, blue, green, yellow, orange, red regions; wavelengths indicated around the wheel: 400 nm in violet, 450 nm between violet and blue, 500 nm between blue and green, 570 nm between green and yellow, 590 nm between yellow and orange, 630 nm between orange and red, 700 nm in red. For simplicity, in the rest of the exercise, aniline blue is denoted $(2\ \mathrm{Na^+(aq)} ; \mathrm{HBleu^{2-}(aq)})$. It is assumed that only the ions $\mathrm{HBleu^{2-}(aq)}$ are responsible for the color of the ink. Data: - molar masses in $\mathrm{g\cdot mol^{-1}}$: hydrogen: 1.0; oxygen: 16.0; sodium: 23.0; sulfur: 32.0; aniline blue: 737.7. - redox couple associated with aniline blue: $\mathrm{HBleu^{2-}(aq) / H_3Bleu^{2-}(aq)}$; - redox couple hydrogen sulfate / hydrogen sulfite: $\mathrm{HSO_4^-(aq) / HSO_3^-(aq)}$; - the aqueous solutions of ions $\mathrm{H_3Bleu^{2-}(aq)}$, $\mathrm{HSO_4^-(aq)}$ and $\mathrm{HSO_3^-(aq)}$ are colorless. 1. Aniline blue. To characterize the color of the aniline blue in an ink cartridge, the entire contents of an ink cartridge are emptied into a 200.0 mL volumetric flask and made up to the mark with distilled water. The resulting solution $S_{\text{encre}}$ is analyzed using a spectrophotometer, shown in Figure 3. Figure 3. Absorption spectrum of the ink solution $S_{\text{encre}}$. Graph: horizontal axis $\lambda$ in nm from 350 to 850; vertical axis absorbance $A$ from 0 to 1. The curve is nearly zero around 430–450 nm and beyond 750 nm, rises sharply from about 500 nm, reaches a maximum near $A \approx 0.95$ at $\lambda \approx 590\ \mathrm{nm}$, then decreases rapidly toward 700 nm. 1.1. Justify the color of the solution $S_{\text{encre}}$. To determine the mass of aniline blue in the ink cartridge in the solution $S_{\text{encre}}$, a stock solution $S_0$ is prepared with an aniline blue concentration of $c_0 = 6.78\times10^{-4}\ \mathrm{mol\cdot L^{-1}}$. From the stock solution $S_0$, several diluted solutions are prepared: Table: - Columns: $S_1$, $S_2$, $S_3$, $S_4$, $S_5$. - Volume taken from the stock solution $V_0$ (mL): 10.0; 20.0; 25.0; 33.0; 50.0. - Volume of the diluted solution $V_f$ (mL): 100.0; 100.0; 100.0; 100.0; 100.0. - Amount-of-substance concentration of the diluted solution $c_f$ ($\mathrm{mol\cdot L^{-1}}$): $6.78\times10^{-5}$; …; $1.69\times10^{-4}$; $2.34\times10^{-4}$; $3.39\times10^{-4}$. - Absorbance: 0.322; 0.584; 0.882; 1.195; 1.489. 1.2. Name the glassware needed to prepare the diluted solution $S_1$. 1.3. Determine the amount-of-substance concentration of the diluted solution $S_2$ missing from the table of values. The absorbance of the different diluted solutions is plotted as a function of the aniline blue concentration, measured at the wavelength $\lambda = 590\ \mathrm{nm}$ selected for the study. Figure 4. Calibration curve: absorbance as a function of aniline blue concentration. Vertical axis $A$ from 0 to 1.1; horizontal axis $c$ in $\mathrm{mmol\cdot L^{-1}}$ from 0 to 0.25. Approximate experimental points: (0; 0), (0.068; 0.35), (0.136; 0.73), (0.169; 0.91), (0.203; 1.05). Dotted modeling line passing through the origin. Box: “Model equation: $A = 5.273 \times c$ with $c$ in $\mathrm{mmol\cdot L^{-1}}$”. 1.4. At the wavelength selected for the study, the absorbance of the solution $S_{\text{encre}}$ is equal to 0.9. Determine the mass of aniline blue contained in an ink cartridge. 2. Study of ink erasure The ink eraser contains a sodium hydrogen sulfite solution that reacts with aniline blue. The transformation that occurs when the ink is erased using the eraser is to be studied. 2.1. Write the reaction equation modeling the transformation between the ions $\mathrm{HSO_3^-(aq)}$ and the ions $\mathrm{HBleu^{2-}(aq)}$. 2.2. Justify the usefulness of having an eraser containing a solution with hydrogen sulfite ions. To study the kinetics of this transformation, the following procedure is carried out: - 100.0 mL of an ink solution is prepared by putting 5 drops of ink, which are diluted in a volumetric flask filled up with water; - 4 mL of the ink solution is mixed with 1 mL of an aqueous sodium hydrogen sulfite solution of concentration $9.0\times10^{-2}\ \mathrm{mol\cdot L^{-1}}$; - the evolution of the absorbance of the solution $S_{\text{mélange}}$ obtained is monitored as a function of time (Figure 5). Figure 5. Evolution of the absorbance of the solution $S_{\text{mélange}}$ as a function of time, at the wavelength selected for the study. Graph: horizontal axis $t$ in s from 0 to 200; vertical axis $A$ from 0 to 1.2. The points show a rapid decrease followed by a low plateau: $A \approx 1.15$ at $t=0$, $0.7$ around 3–4 s, $0.5$ around 9 s, $0.3$ around 16 s, $0.2$ around 25 s, $0.1$ around 40 s, then $A$ slowly tends toward about 0.03 up to 180 s. 2.3. An ink cartridge of 0.75 mL contains 25 mg of aniline blue. Knowing that 20 drops of ink have a volume of 1 mL, determine the limiting reactant of the transformation. Comment. The candidate is invited to take initiative and present the method followed, even if it does not lead to a result. The method is assessed and must be clearly presented. This question is independent of the rest of the study. 2.4. Estimate the half-reaction time. Comment on the result.
⏳ Solution not generated yet

Open this statement in Expert Maths AI: the step-by-step solution is computed on demand, checked by a second resolution, then published here for everyone.

📝 See the solution

Have a similar exercise? Get it solved step by step, for free.

🧮 Solve my exercise