Baccalauréat 2021 — Physics-Chemistry specialty, Métropole, Mayotte, La Réunion, Antilles Guyane (jour 2) remplacement — exercise 3 : Exercise B — Study of a battery in the laborat
Statement
EXERCISE B - STUDY OF A BATTERY IN THE LABORATORY
Keywords: batteries; evolution of a system
Every year in France, 1.3 billion batteries are sold in stores. Small energy reservoirs, they are essential objects in everyday life. The aim of this exercise is to study the operation of a battery made in the laboratory and to compare its electrical capacity with that of an AA battery sold in stores, photographed opposite.
Photograph: AA batteries indicated with a capacity of 2800 mAh.
Data:
- molar masses:
chemical species: $\mathrm{Al}$; $\mathrm{Al_2(SO_4)_3}$.
molar mass in $\mathrm{g\cdot mol^{-1}}$: 27,0; 342,15.
- redox couples: $\mathrm{(Cu^{2+}(aq) / Cu(s))}$ and $\mathrm{(Al^{3+}(aq) / Al(s))}$;
- elementary charge: $e = 1{,}602\times10^{-19}\ \mathrm{C}$;
- Avogadro constant: $N_A = 6{,}022\times10^{23}\ \mathrm{mol^{-1}}$;
- $1\ \mathrm{mAh} = 3{,}60\ \mathrm{C}$.
To make the battery studied, two aqueous solutions are prepared: one of aluminum sulfate called S, and one of copper sulfate $(\mathrm{Cu^{2+}(aq)} ; \mathrm{SO_4^{2-}(aq)})$, called S’, both at the concentration in added solute of $C = 0{,}100\ \mathrm{mol\cdot L^{-1}}$. Aluminum sulfate is a solid with formula $\mathrm{Al_2(SO_4)_3(s)}$, available in powder form.
1. Write the precise experimental procedure to be implemented to prepare 50,0 mL of solution S from aluminum sulfate powder.
2. Calculate the amounts-of-substance concentrations of aluminum ions $\mathrm{Al^{3+}(aq)}$ and sulfate ions $\mathrm{SO_4^{2-}(aq)}$ in solution S.
The battery is assembled according to the diagram in figure 1 shown below:
Figure 1. Diagram of the battery structure. Two beakers connected by a U-shaped salt bridge made of a gel soaked with an aqueous saturated solution of ammonium chloride $(\mathrm{NH_4^+(aq)} ; \mathrm{Cl^-(aq)})$. Left beaker: aluminum plate of mass 19,2 g immersed in 50,0 mL of aqueous aluminum sulfate solution at concentration $C$. Right beaker: copper plate immersed in 50,0 mL of aqueous copper sulfate solution at concentration $C$. A voltmeter connects the two plates; the COM terminal of the voltmeter is connected to the aluminum plate and the V terminal to the copper plate.
To determine the polarity of the battery thus formed, a voltmeter is connected to the two metal plates. The COM terminal of the voltmeter is connected to the aluminum plate. Under these conditions, the voltage measured across the battery is $U = 0{,}92\ \mathrm{V}$.
3. Determine the positive terminal of the battery using the experimental setup of figure 1.
In the rest of the study, the voltmeter is removed and replaced by an ohmic conductor of resistance $R$.
4. Complete the diagram provided ON THE APPENDIX TO BE SUBMITTED WITH THE ANSWER SHEET by indicating the polarity of the battery, the direction of electric current, and the direction of movement of charge carriers in the battery and outside the battery during its operation.
5. Establish the equations modeling the reactions at the electrodes during the operation of the battery. Deduce that the equation of the reaction modeling the operation of the battery is written:
$3\mathrm{Cu^{2+}(aq)} + 2\mathrm{Al(s)} \rightleftharpoons 3\mathrm{Cu(s)} + 2\mathrm{Al^{3+}(aq)}$.
The equilibrium constant $K$ associated with this reaction has the value $K \approx 10^{200}$, at 25 °C.
6. Show that the initial value of the reaction quotient of the system is $Q_r = 40$. Conclude about the evolution of the system.
7. Electrical capacity of the battery.
7.1. Determine which the limiting reactant is.
7.2. Determine the electrical capacity $Q$ of the laboratory battery, then compare it with commercial AA-type batteries.
8. Identify a parameter of the composition of the laboratory battery that would need to be changed in order to increase the electrical capacity of the battery, specifying how this parameter must change. Justify.
⏳ Solution not generated yet
Open this statement in Expert Maths AI: the step-by-step solution is computed on demand, checked by a second resolution, then published here for everyone.
📝 See the solutionHave a similar exercise? Get it solved step by step, for free.
🧮 Solve my exercise