Baccalauréat 2021 — Physics-Chemistry specialty, Métropole, Mayotte, La Réunion, Antilles Guyane (jour 2) — exercise 4 : Exercise C - Study of a Soap Film (official exam paper)
Statement
EXERCISE C - STUDY OF A SOAP FILM
Keywords: light interference.
The interference phenomenon can be used to determine the thickness of a transparent material. In this exercise, the goal is to determine the thickness of a soap film by carrying out a simple experiment.
A rectangular frame is immersed in soapy water to form a soap film inside the frame. The thickness of the film is not the same everywhere: it is greater at the bottom of the setup due to the action of gravity. The soap film is illuminated with white light, and at a suitable angle, an interference pattern is observed.
Ray 1 strikes the soap film. The light is partly reflected (ray 2) and partly enters the soap film. The ray resulting from reflection at the other side of the film then emerges from it (ray 3) according to the diagram in figure 2. Rays 2 and 3 then interfere. These interferences are visible on the soap film.
Figure 1. Diagram of the experimental setup: a vertical frame containing the soap film is illuminated by a lamp; a camera is placed facing the film to record the image.
Figure 2. Cross-section of the soap film with a representation of the path of light at the film: the film is a vertical layer between two air regions. Ray 1 strikes one face obliquely; part is reflected and emerges as ray 2; another part crosses the film, reflects on the other face, then emerges parallel to ray 2 as ray 3.
Given:
- the value of the speed $c$ of light in vacuum and in air is assumed to be known by the candidate;
- the value of the refractive index inside the soap film is $n=1,34$ for all wavelengths.
1. The interference phenomenon
The soap film illuminated in white light is photographed. The image is processed by software that makes it possible to select a color corresponding to the wavelength $\lambda$ in air equal to 600 nm. The result is shown in figure 3.
Figure 3. Interference on the soap film: rectangular photograph showing several horizontal alternating bright and dark fringes; the upper part has a dark zone, then nearly horizontal bright bands separated by dark bands; the bottom of the image is more irregular and dark.
1.1. Using figure 3, explain how to distinguish the regions where the interferences are constructive from those where the interferences are destructive.
1.2. State qualitatively the condition for constructive interference and the condition for destructive interference.
1.3. In figure 4, the soap film is shown for the case where light arrives perpendicular to its surface. Near point M, the two faces of the soap film are considered parallel and the thickness of the film $e$ is equal to 900 nm.
Figure 4. Representation of the path of rays 1, 2 and 3 as defined in the introduction: three side-by-side diagrams show a "soap film" layer of thickness $e$ between two "air" media. Point M is near the entrance face. Ray 1 arrives perpendicularly on the film; ray 2 is reflected on the first face; ray 3 enters the film, reflects on the second face, returns to the first face and emerges into the air in the same direction as ray 2. A double arrow under the layer indicates thickness $e$.
Under the previous lighting and film-thickness conditions, it is assumed that the optical path difference $\delta(M)$ at point M between rays 3 and 2 is given by:
$\delta(M)=2n\cdot e-\dfrac{\lambda}{2}$.
Determine by calculation whether the interferences at point M are destructive or constructive.
2. Comparison of the interference phenomenon as a function of the wavelength studied
The photograph of the experiment is processed using software to study the phenomenon in blue light ($\lambda_{bleu}=458\ \mathrm{nm}$) and in red-orange light ($\lambda_{rouge}=600\ \mathrm{nm}$).
Figure 5. Photographic setup of the results of the two experiments: image of the film divided vertically into two halves by a black line. On the left, "Blue-light image"; on the right, "Red-orange-light image". At the top there is a colorless region of the film outlined with dashed lines. Arrows identify constructive fringes: on the left, for blue light, levels $k=1$, $k=2$, $k=3$ are indicated from top to bottom; on the right, for red-orange light, levels $k=1$, $k=2$, $k=3$ are indicated from top to bottom. Point A is marked on the central line, at a level where bright fringes from both images coincide.
Because of reflection phenomena of the rays, constructive interferences appear for different thicknesses of the soap film.
2.1. Show that the thicknesses corresponding to constructive interferences are given by the following relation:
$e_k=\left(\dfrac{2k+1}{4}\right)\times \dfrac{\lambda}{n}$
with $n$ the refractive index of the medium, $e_k$ the film thickness, $k$ an integer with $k\geq 0$ and $\lambda$ the wavelength in air selected by image processing.
2.2. Calculate the minimum thickness for constructive interferences in blue light to appear.
2.3. The colorless region in figure 5 at the top of the support corresponds to a very small film thickness. Destructive interferences are then obtained. It is observed that over time the surface of this region extends downward. Suggest an explanation.
2.4. In the photograph in figure 5, at point A, constructive interferences are observed both in blue light and in red-orange light. Determine the thickness of the soap film at point A to account for these observations.
⏳ Solution not generated yet
Open this statement in Expert Maths AI: the step-by-step solution is computed on demand, checked by a second resolution, then published here for everyone.
📝 See the solutionHave a similar exercise? Get it solved step by step, for free.
🧮 Solve my exercise