Baccalauréat 2022 — Physics-Chemistry specialty, Amérique du Nord — exercise 2 : The thickness of the pole vault landing mat (official exam paper)
Statement
Exercise A: The thickness of the pole vault landing mat
Keywords: motion in a uniform gravitational field, energy considerations, Python programming language
Armand Duplantis is a Swedish-American athlete. Since February 2020, he has held the world pole vault record by clearing a bar at 6.18 m.
The principle of pole vaulting is based on converting kinetic energy, coming from the vaulter’s run-up, into gravitational potential energy.
The athlete plants the pole at the bottom of the pit and bends it. The kinetic energy from the run-up is then transformed into elastic energy and stored in the pole. When the pole straightens, it returns this elastic energy to the athlete. In this way, one goes from a horizontal motion, the run-up, to a vertical motion, the jump. Today, carbon-fiber poles return almost all of the stored energy.
Figure: different phases during the pole vault. The diagram shows the athlete running and then planting the pole, the pole bending, the athlete rising, then clearing the bar and landing on the reception mat. A vertical axis indicates the altitude $z$ upward, with altitude 0 at ground level. The landing mat is shown to the right of the pole plant point.
In this exercise, the aim is to study energy transfers during the ascent phase, determine the athlete’s impact speed on the mat, and verify that the thickness of the landing mat prevents the athlete from being injured.
In the whole exercise, the athlete is modeled by his center of mass and $z$ denotes the altitude relative to the ground.
Data:
- athlete’s mass: $m=79,0\ \mathrm{kg}$;
- gravitational field strength: $g=9,81\ \mathrm{N\cdot kg^{-1}}$.
A. Study of the ascent phase
The complete motion of Armand Duplantis, during his world record, is filmed and then studied using a tracking software. The data from the ascending part of the motion are processed using a program written in Python that makes it possible to represent, as a function of time, the kinetic energy $E_c$, gravitational potential energy $E_{pp}$, elastic potential energy $E_{pe}$ and mechanical energy $E_m$ of the system defined by the set {athlete + pole}. An extract of this program is given below:
Extract from the program written in Python:
```python
from math import *
import numpy as np
import matplotlib.pylab as plt
# Number of measurement points
Np=21
# Values of the constants
m=79.0 # in kilogram
g=9.81 # in newton per kilogram
# arrays containing the values of time t in seconds,
# height z in meters and speed v of the center of mass in meters per second
t=np.array([0,0.1,0.2,0.3,0.4,0.5,0.6,0.7,0.8,0.9,1,1.1,1.2,1.3,1.4,1.5,1.6,1.7,1.8,1.9,2])
z=np.array([1,1.032,1.058,1.118, incomplete list])
v=np.array([10.063,9.522,8.512,7.365,6.463,5.695,5.032,4.5,3.897,3.464,3.212, incomplete list])
# initialization of the energies
Em=np.zeros(21)
Ec=np.zeros(21)
Epp=np.zeros(21)
Epe=np.zeros(21)
# calculations of the values of the different energies as a function of time
for i in range(0,Np) :
Em[i]=4775.0
Ec[i]=.......... # To be completed
Epp[i]=.......... # To be completed
```
For the ascending part of the athlete’s motion, the following curves are obtained:
Graph: curves obtained using the program written in Python. Horizontal axis: $t$ in seconds from 0.0 to 2.0. Vertical axis: energies in joules from 0 to 5000. The legend indicates: Curve A (plus symbols), Curve B (black points), Curve $E_{pe}(t)$ (stars). Curve A decreases sharply at the start from about 3600 J at $t=0.1$ s to about 450 J near $t=1.0$ s, remains low around 400–600 J, then rises to about 1400 J around 1.6–1.7 s before dropping back close to 0 at 2.0 s. Curve B increases overall from about 780 J at $t=0.1$ s to about 4775 J at $t=2.0$ s. Curve $E_{pe}(t)$ increases from about 350 J at $t=0.1$ s to a maximum of about 2700 J around $t=0.9$ s, then decreases to become nearly zero around $t=1.7$ s and beyond.
A.1. Identify, among curves A and B, the one representing kinetic energy and the one representing gravitational potential energy. Justify your choices.
A.2. Copy and complete lines 27 and 28 of the program code.
A.3. Extract from the program the value of Armand Duplantis’s initial speed.
Elastic potential energy increases with the deformation of the pole.
A.4. Identify, among the three situations below, the one that corresponds to $t=0,9\ \mathrm{s}$. Justify.
Figure: the pole vaulter in different situations. Three thumbnails are shown.
Situation 1: the athlete is still relatively low, the pole is strongly bent downward and forward, the athlete is hanging from the pole.
Situation 2: the athlete is higher, almost horizontal near the top of the pole, the pole is still very bent.
Situation 3: the athlete is higher and inverted, close to vertical, the pole is less bent and straightening.
Armand Duplantis clears the bar using a swinging technique. Thus, his center of mass is located at a point A slightly below the bar at the moment of clearance.
A.5. Using the previous graph, determine the value of the maximum altitude $z_A$, relative to the ground, reached by the athlete’s center of mass.
B. The impact speed on the landing mat
At the moment of clearing the bar, the athlete’s center of mass is at altitude $z_A$ and its speed is considered to be zero.
Diagram: in a coordinate system $(Oxz)$, the $z$ axis is vertical upward and the $x$ axis horizontal to the right. The athlete clears the bar and then falls onto a landing mat. Altitude $z_A$ corresponds to the center of mass at clearance, above the ground; altitude $z_B$ corresponds to the center of mass at the moment of impact with the mat, lower down.
Let $z_B$ be the altitude of the athlete’s center of mass at the moment of impact with the mat.
Air resistance will be neglected.
B.1. Justify that after clearing the bar, the athlete is in free fall.
B.2. Using the kinetic energy theorem or the law of conservation of mechanical energy, determine the expression for the athlete’s impact speed on the mat as a function of $g$, $z_A$ and $z_B$.
It is given that $z_B-z_A=5,31\ \mathrm{m}$.
B.3. Calculate the athlete’s impact speed.
C. Thickness of the mat
Consider the coordinate system $(Oxz)$ shown in the previous diagram.
At the moment the athlete arrives on the mat, his center of mass has a velocity $\vec{v_0}$ whose vertical component is $v_{0z}=-10,2\ \mathrm{m\cdot s^{-1}}$.
The horizontal component of the velocity is taken to be zero: $v_{0x}=0$.
The action of the mat on the athlete is modeled by a constant force $\vec{F_T}$ vertically upward.
To avoid causing injuries during the landing phase, the mat deforms so that the magnitude of the acceleration experienced by the athlete’s body does not exceed 10 times the acceleration due to gravity, i.e. $10\times g$.
We place ourselves in the case where the acceleration is maximal: $a_z=10\times g$.
C.1. After drawing up a force balance for Armand Duplantis during landing and using Newton’s second law, show that the magnitude $F_T$ of the force exerted by the mat is equal to 8.52 kN.
C.2. Taking the instant of contact between the athlete and the mat as the time origin and using the coordinate system $(Oxz)$, show that the equations of motion of the athlete are:
$v_z(t)=10\times g\times t+v_{0z}$
$z(t)=5\times g\times t^2+v_{0z}\times t+z_B$
C.3. Determine the duration of the landing phase.
The landing mat has a thickness of 82 cm.
C.4. Show that this thickness is sufficient so that the athlete is not injured by the ground.
⏳ Solution not generated yet
Open this statement in Expert Maths AI: the step-by-step solution is computed on demand, checked by a second resolution, then published here for everyone.
📝 See the solutionHave a similar exercise? Get it solved step by step, for free.
🧮 Solve my exercise