Baccalauréat 2022 — Physics-Chemistry specialty, Amérique du Nord — exercise 3 : Supercapacitors for recharging an electric bus (official exam paper)
Statement
Exercise B: Supercapacitors for recharging an electric bus
Keywords: series RC circuit model, charging and discharging of a capacitor
A French company, specializing in research into electric transport solutions, is behind an innovative solution consisting of replacing the batteries in electric buses with supercapacitors. Bus stops are equipped with a unit, called a totem, which also contains supercapacitors.
Image: photograph of an electric bus connected to a charging totem at a stop. Source indicated: https://graphibus.fr/portfolio/covering/livree-bus/watt-system/
The principle is as follows: at each stop, the bus connects automatically and quickly to the totem. The transfer of electrical energy between the supercapacitors in the totem and the supercapacitors on board the bus then takes place in about 10 s. This phase, called "biberonnage", must be perfectly safe. Indeed, the electric current intensity can reach several thousand amperes at the start of the transfer.
A. Study of a supercapacitor
Each supercapacitor used in the totem has a nominal voltage $E$. This is the voltage reached when the supercapacitor of capacitance $C$ is fully charged.
After fully charging a supercapacitor to its nominal voltage $E$, it is placed in the circuit shown in the figure below. At time $t=0$, switch K is closed.
Electrical circuit diagram for the discharging of a supercapacitor: a series circuit consisting of a capacitor on the left and a resistor $R$ on the right, connected by wires and a switch $K$ at the top closed at $t=0$. The current $i(t)$ is indicated upward in the capacitor branch. The capacitor carries a charge $q(t)$ on the upper positive plate and $-q(t)$ on the lower plate. The voltage $u_C(t)$ is indicated across the capacitor by an upward vertical arrow. The voltage $u_R(t)$ is indicated across the resistor by an upward vertical arrow.
We denote by $q(t)$ the electric charge carried by the positive plate of the capacitor at time $t$ as shown in the circuit diagram.
Data:
- initial value of the voltage across the capacitor: $u_C(0)=E=2,7\ \mathrm{V}$;
- resistance value: $R=100\pm2\ \mathrm{m\Omega}$ where the part after the ± is the standard uncertainty.
⏳ Solution not generated yet
Open this statement in Expert Maths AI: the step-by-step solution is computed on demand, checked by a second resolution, then published here for everyone.
📝 See the solutionHave a similar exercise? Get it solved step by step, for free.
🧮 Solve my exercise