Baccalauréat 2022 — Physics-Chemistry specialty, Asie — exercise 1 : Wine and its components (official exam paper)
Statement
A wine is an aqueous solution that contains, in varying proportions: alcohols (ethanol, glycerol, etc.), carboxylic acids (citric acid, tartaric acid, malic acid, etc.), esters (including ethyl ethanoate), sulfur dioxide, tannins, sugars, iron(II) ions $\mathrm{Fe}^{2+}$ and iron(III) ions $\mathrm{Fe}^{3+}$, etc. These different components contribute to the flavor of the wine.
In this exercise, we focus on two of these components:
- iron, which may cause the “casse” of a white wine (Part A);
- an ester, ethyl ethanoate, which contributes to the aroma of the wine (Part B).
Part A - Spectrophotometric determination of iron ions in a wine
A white wine contains iron in the form of iron(II) ions, $\mathrm{Fe}^{2+}(\mathrm{aq})$, and iron(III) ions, $\mathrm{Fe}^{3+}(\mathrm{aq})$. This iron comes in small amounts from the grapes. For the most part, it comes from the equipment used during winemaking.
If the iron content exceeds $10\ \mathrm{mg\cdot L^{-1}}$, the formation of a white precipitate may be feared in the wine, causing a cloudiness called white casse for white wine.
The aim of this Part A is to determine the risk of white casse in a white wine.
To do this, a spectrophotometric titration of iron ions is carried out after reacting them with thiocyanate ions to form a colored species in solution. In practice, the procedure is as follows:
- All the iron(II) ions are oxidized into iron(III) ions by adding hydrogen peroxide in acidic medium.
- A potassium thiocyanate solution is added to make the iron(III) ions react with thiocyanate ions and form thiocyanatoiron(III) ions $[\mathrm{Fe(SCN)}]^{2+}(\mathrm{aq})$, according to the reaction equation:
$\mathrm{Fe}^{3+}(\mathrm{aq}) + \mathrm{SCN}^-(\mathrm{aq}) \rightarrow [\mathrm{Fe(SCN)}]^{2+}(\mathrm{aq})$
- An aqueous solution is obtained whose red color is due to the ions $[\mathrm{Fe(SCN)}]^{2+}(\mathrm{aq})$.
- A spectrophotometric titration is then carried out after calibration. This makes it possible to determine the mass concentration of iron(III) ions corresponding to the total mass concentration of iron(II) and iron(III) ions.
Data:
- Color wheel. In this representation, complementary colors are placed opposite each other on the same diameter. Figure described: color wheel with six colored zones: blue $(420-480\ \mathrm{nm})$ at the top, violet $(380-420\ \mathrm{nm})$ at the top right, red $(600-750\ \mathrm{nm})$ at the bottom right, yellow $(580-595\ \mathrm{nm})$ at the bottom, green $(510-560\ \mathrm{nm})$ at the bottom left, cyan $(480-510\ \mathrm{nm})$ at the top left.
Spectrophotometer setting
The absorption spectrum of the ion $[\mathrm{Fe(SCN)}]^{2+}$ in aqueous phase is given below. Figure described: graph "Absorption spectrum of the ion $[\mathrm{Fe(SCN)}]^{2+}$". Vertical axis: absorbance $A$ from 0 to 0.7. Horizontal axis: wavelength $\lambda$ in nm from 420 to 700. The red curve increases from about $A=0.31$ at $420\ \mathrm{nm}$ to a maximum close to $A=0.63$ near $490\ \mathrm{nm}$, then decreases gradually: about $0.58$ at $520\ \mathrm{nm}$, $0.36$ at $560\ \mathrm{nm}$, $0.19$ at $600\ \mathrm{nm}$, $0.10$ at $640\ \mathrm{nm}$ and $0.05$ near $690\ \mathrm{nm}$.
1. Indicate the color corresponding to the radiations most strongly absorbed by the ion $[\mathrm{Fe(SCN)}]^{2+}$ and thus justify the color of the solution.
2. Propose a wavelength to use to carry out the titration.
Preparation of standard solutions
To prepare the standard solutions, the following procedure is used:
- Prepare 5 standard iron(III) ion solutions numbered 1 to 5 by dilution of a stock solution $S_0$ of iron(III) ions with mass concentration in iron(III) ions equal to $t_0 = 100\ \mathrm{mg\cdot L^{-1}}$.
Table: standard solution number: 1, 2, 3, 4, 5; $t(\mathrm{Fe}^{3+})$ in $\mathrm{mg\cdot L^{-1}}$: 1.0; 2.0; 3.0; 4.0; 5.0.
- Pour $10.0\ \mathrm{mL}$ of each solution into a beaker.
- Add $1.0\ \mathrm{mL}$ of concentrated hydrochloric acid and $1.0\ \mathrm{mL}$ of potassium thiocyanate solution with molar concentration equal to $1.0\ \mathrm{mol\cdot L^{-1}}$.
The thiocyanate ions are then in excess in each solution.
3. State why it is necessary for the thiocyanate ions to be added in excess in each solution.
4. Determine the volume $V_0$ of stock solution $S_0$ to take in order to prepare $V_2 = 50.0\ \mathrm{mL}$ of standard solution no. 2.
Measurements and analysis
To determine the iron content of the white wine studied, a wine solution, denoted $S_V$, is prepared by mixing:
- $10.0\ \mathrm{mL}$ of white wine,
- $1.0\ \mathrm{mL}$ of concentrated hydrochloric acid and $1.0\ \mathrm{mL}$ of potassium thiocyanate solution with molar concentration equal to $1.0\ \mathrm{mol\cdot L^{-1}}$,
- 4 drops of 20-volume hydrogen peroxide (with no effect on the volume).
Then:
- The absorbance of the 5 standard solutions is measured.
- A calibration curve is plotted.
- The absorbance $A_V$ of the wine solution $S_V$ is measured.
The measured points have been plotted on a graph showing absorbance as a function of concentration. The line has been added to highlight a trend in the distribution of the measured points. Figure described: graph with vertical axis "Absorbance $A$" from 0.0 to 0.6 and horizontal axis "Mass concentration of iron in the wine $t$ (mg/L)" from 0 to 6. Approximate red points: $(1;0.11)$, $(2;0.24)$, $(3;0.34)$, $(4;0.45)$, $(5;0.54)$. A black straight line passes through the origin and follows the points approximately, reaching about $A=0.55$ for $t=5\ \mathrm{mg\cdot L^{-1}}$.
5. State the form of the relationship between absorbance $A$ and mass concentration $t$ thus highlighted. Give the name of the corresponding law.
For the wine solution, one finds: $A_V = 0.16$.
6. Determine whether the studied wine presents a risk of white casse. Justify your answer.
Part B - Synthesis of a wine ester in the laboratory
Esters are organic molecules that contribute to the richness of a wine's aroma. The synthesis of these esters during the biological winemaking process is slow and may last several months.
In this part, we focus on this duration of several months mentioned as necessary for ester production by relating it to the experimental conditions. For this purpose, we study the formation of one of these esters over time, ethyl ethanoate, using a laboratory procedure.
The equation for the synthesis of ethyl ethanoate is:
$\mathrm{CH_3COOH} + \mathrm{CH_3CH_2OH} \rightleftharpoons \mathrm{CH_3COOCH_2CH_3} + \mathrm{H_2O}\quad (1)$
Data:
- Color-change range of thymol blue: $(\mathrm{pH}=8.0\ ;\ \mathrm{pH}=9.6)$.
- Densities and molar masses of some chemical species. Table: ethanoic acid: density at $25\ ^\circ\mathrm{C}$ $1.05\ \mathrm{g\cdot mL^{-1}}$, molar mass $60.0\ \mathrm{g\cdot mol^{-1}}$; ethanol: $0.789\ \mathrm{g\cdot mL^{-1}}$, $46.0\ \mathrm{g\cdot mol^{-1}}$; ethyl ethanoate: $0.902\ \mathrm{g\cdot mL^{-1}}$, $88.0\ \mathrm{g\cdot mol^{-1}}$; water: $1.00\ \mathrm{g\cdot mL^{-1}}$, $18.0\ \mathrm{g\cdot mol^{-1}}$.
To carry out the kinetic study of this synthesis, the following procedure is used:
- Mix $115\ \mathrm{mL}$ of pure ethanoic acid and $117\ \mathrm{mL}$ of pure ethanol. Keep the mixture in an ice-water bath.
- Introduce $2.0\ \mathrm{mL}$ of the reaction mixture into 7 test tubes numbered 0 to 6. Keep them in an ice-water bath.
- Prepare a graduated burette containing a sodium hydroxide solution $(\mathrm{Na^+(aq)} + \mathrm{HO^-(aq)})$ with concentration $C_B = 1.0\ \mathrm{mol\cdot L^{-1}}$.
- At time $t=0$: immerse test tubes 1 to 6 in a boiling-water bath; place test tube 0 at room temperature.
- At times $t_1=2\ \mathrm{min}$, $t_2=7\ \mathrm{min}$, $t_3=12\ \mathrm{min}$, $t_4=20\ \mathrm{min}$, $t_5=35\ \mathrm{min}$ and $t_6=50\ \mathrm{min}$: remove from the water bath the tube "$i$" corresponding to time "$t_i$" and immediately plunge it into an ice-water bath; titrate the ethanoic acid in the reaction medium of tube "$i$" with a sodium hydroxide solution.
7. Explain why the reaction mixture is placed in an ice-water bath before time $t=0$ and before titration.
8. Show that the prepared reaction mixture is equimolar.
9. Verify that the amount of acid contained in each tube at time $t=0$ is: $n_0 = 17.3\ \mathrm{mmol}$.
After cooling a tube to stop the esterification reaction, the remaining ethanoic acid in the tube is titrated with a sodium hydroxide solution of concentration $C_B$, in the presence of thymol blue. For tube "$i$", the volume of titrant solution added at equivalence is denoted $V_{B,i}$.
The supporting titration reaction is given by:
$\mathrm{CH_3COOH(aq)} + \mathrm{HO^-}(\mathrm{aq}) \rightarrow \mathrm{CH_3COO^-}(\mathrm{aq}) + \mathrm{H_2O}\quad (2)$
10. Explain the role of thymol blue.
11. Define equivalence for the supporting titration reaction (2).
12. Deduce that the amount of remaining acid $n_{ac,i}$ at time $t_i$ in a tube "$i$" is given by:
$n_{ac,i} = C_B V_{B,i}$
Let $n_i$ be the amount of ethyl ethanoate produced in tube "$i$". We seek to relate this amount $n_i$ to the remaining acid amount $n_{ac,i}$.
13. Establish the reaction-progress table for the chemical transformation modeled by reaction (1), showing the initial state (progress $x=0$) and the final state (progress $x_f$).
14. Show that the amount $n_i$ of ethyl ethanoate present in a tube "$i" at time $t_i$ is given by the relation:
$n_i = n_0 - C_B V_{B,i}$
The table below summarizes the experimental results.
Table: tube $i$: 1, 2, 3, 4, 5, 6; $V_{B,i}$ (mL): 15.3; 11.3; 9.3; 7.3; 6.3; 6.3; amount of ester substance $n_i$ (mol): $2.0\times 10^{-3}$; missing value; $8.0\times 10^{-3}$; $1.0\times 10^{-2}$; $1.1\times 10^{-2}$; $1.1\times 10^{-2}$.
15. Give the missing value of the amount of substance $n_2$ in the table.
The graph representing the amount of ester substance $n_i$ formed as a function of time is available in APPENDIX PAGE 15/16 TO BE SUBMITTED WITH THE PAPER. Appendix not provided in the pages transmitted.
16. Indicate qualitatively how the volumetric rate of appearance of the ester changes over time.
17. Determine the value of the volumetric rate of appearance of the ester at time $t=20\ \mathrm{min}$.
18. Define the half-reaction time $t_{1/2}$ and determine it by a graphical construction on the curve IN APPENDIX PAGE 15/16 TO BE SUBMITTED WITH THE PAPER.
19. Compare this half-reaction time with the time scale mentioned in the introduction for ester production in wine. Propose an explanation for the difference by reasoning about the parameters that may affect the value of $t_{1/2}$.
⏳ Solution not generated yet
Open this statement in Expert Maths AI: the step-by-step solution is computed on demand, checked by a second resolution, then published here for everyone.
📝 See the solutionHave a similar exercise? Get it solved step by step, for free.
🧮 Solve my exercise