Baccalauréat 2022 — Physics-Chemistry specialty, Asie — exercise 2 : Exercise A – Is formic acid suitable for storing dihydrogen? (official exam paper)
Statement
Keywords: amount of substance, conductivity, equilibrium constant.
Dihydrogen $\mathrm{H_2(g)}$ is being considered as a substitute for gasoline in internal combustion engines, or to supply fuel cells, because its oxidation produces only water. However, dihydrogen presents certain technical difficulties: it is gaseous at room temperature and highly flammable.
One alternative consists in “storing” dihydrogen by reacting it with carbon dioxide to form formic acid, which is liquid and only slightly flammable at ambient temperatures and pressures. To recover the dihydrogen for use, the reverse transformation is carried out.
In this context, researchers at Rice University (United States) recently found a catalytic process that makes it possible to produce formic acid at low cost.
Here are two excerpts from popular science articles:
Document 1. Formic acid in the engine.
“(...) One litre of formic acid contains more than 53 grams of hydrogen, compared with barely 28 grams for the same volume of pure hydrogen, pressurized at 350 bar.”
Source: www.enerzine.com
Document 2. Production of formic acid.
“(...) With their current reactor, engineers at Rice University have produced formic acid, (...), in an aqueous solution containing about 30% by mass of formic acid, i.e. about $7{,}0\ \mathrm{mol\cdot L^{-1}}$.”
Source: www.futura-science.fr
Data:
- Ideal gas law: $P\,V = n\,R\,T$, where $P$ is the gas pressure in Pa, $V$ its volume in $\mathrm{m^3}$, $n$ its amount of substance in mol, $T$ its temperature in K and $R$ the ideal gas constant, $R = 8{,}314\ \mathrm{J\cdot K^{-1}\cdot mol^{-1}}$.
- $1\ \mathrm{bar} = 10^5\ \mathrm{Pa}$
- $1\ \mathrm{m^3} = 10^3\ \mathrm{L}$
- Temperature conversion: $T(\mathrm{K}) = \theta(°\mathrm{C}) + 273{,}15$
- Molecular molar mass of formic acid: $M_1 = 46{,}0\ \mathrm{g\cdot mol^{-1}}$
- Molecular molar mass of dihydrogen: $M_2 = 2{,}0\ \mathrm{g\cdot mol^{-1}}$
- Density of pure formic acid at 25 °C: $\rho = 1{,}22\ \mathrm{g\cdot mL^{-1}}$
- Prefixes used in nomenclature: table giving, for the number of carbon atoms 1, 2, 3, 4, 5, the respective prefixes meth-, eth-, prop-, but-, pent-.
Part A - Interest of formic acid for storing dihydrogen
The aim of this part A is to study the usefulness of formic acid for storing dihydrogen compared with storing the gas under pressure.
1. The semi-structural formula of formic acid is given opposite. Justify that this acid is named methanoic acid in the official nomenclature.
Description of the semi-structural formula: a carboxyl group $-\mathrm{COOH}$ attached to a hydrogen atom, i.e. $\mathrm{H-C(=O)-OH}$.
2. Verify that one litre of dihydrogen at pressure $P = 350\ \mathrm{bar}$ and temperature $\theta = 25\ °\mathrm{C}$ contains a mass $m = 28\ \mathrm{g}$ of dihydrogen. It will be assumed that this gas obeys the ideal gas equation under these temperature and pressure conditions.
To recover the dihydrogen from formic acid, a transformation is carried out whose reaction equation is:
$\mathrm{HCOOH(l) \rightarrow H_2(g) + CO_2(g)}$
This transformation is considered to be complete.
3. Verify that one litre of formic acid makes it possible to produce 53 g of dihydrogen, as indicated in document 1.
4. State two advantages of formic acid for storing dihydrogen compared with storing the gas under pressure.
Part B – Monitoring the formic acid content of an aqueous formic acid solution
A conductometric method is used to rapidly monitor the formic acid content of an aqueous formic acid solution prepared by the researchers at Rice University.
For this purpose:
• The aqueous solution $S_0$ of formic acid prepared by the researchers is diluted 100 times. A daughter solution $S_1$ of concentration $C_1$ is obtained.
• A volume $V_1 = 1{,}00\ \mathrm{L}$ of this solution $S_1$ is taken.
• The conductivity of the solution $S_1$ is measured.
The acid-base reaction equation of formic acid with water is:
$\mathrm{HCOOH(aq) + H_2O \rightleftharpoons HCOO^{-}(aq) + H_3O^{+}(aq)} \quad \text{(reaction 1)}$
In order to relate conductivity to concentration, the following assumptions are made:
• The effect of the autoprotolysis of water is neglected.
• It is assumed that the only species contributing significantly to the conductivity of the solution are oxonium ions, $\mathrm{H_3O^+}$, and formate ions, $\mathrm{HCOO^-}$.
Data:
- Formic acid is a weak acid; it belongs to the acid-base pair formic acid / formate ion: $\mathrm{HCOOH/HCOO^-}$
- Acid dissociation constant of the acid-base pair of formic acid $K_A = 1{,}77 \times 10^{-4}$
- Ionic molar conductivities at 25 °C: $\lambda(\mathrm{H_3O^+}) = 35{,}0\ \mathrm{mS\cdot m^2\cdot mol^{-1}}$ ; $\lambda(\mathrm{HCOO^-}) = 5{,}46\ \mathrm{mS\cdot m^2\cdot mol^{-1}}$
- Standard concentration: $c^0 = 1{,}00\ \mathrm{mol\cdot L^{-1}}$
5. Express the conductivity $\sigma$ of the solution as a function of the concentrations and ionic molar conductivities of the oxonium ions and formate ions.
6. Deduce a relation between $\sigma$, $\lambda(\mathrm{H_3O^+})$, $\lambda(\mathrm{HCOO^-})$, $V_1$ and the extent of reaction at the end of the reaction $x_f$ for reaction 1 ($x_f$ in mol).
The conductivity measurement of solution $S_1$ gives: $\sigma = 144\ \mathrm{mS\cdot m^{-1}}$.
7. Show that the extent of reaction at the end has the value:
$x_f = 3{,}56 \times 10^{-3}\ \mathrm{mol}$
It is accepted that the equilibrium constant $K_A$ can be written as a function of the extent of reaction at the end $x_f$ ($x_f$ in mol) in the approximate form:
$K_A = \left(\dfrac{x_f}{V_1}\right)^2 \times \dfrac{1}{c^0 \times C_1}$
8. Determine the molar concentration $C_1$ of solution $S_1$.
9. Deduce the molar concentration $C_0$ of solution $S_0$. Qualitatively compare the concentration obtained with the formic acid content stated in the article in document 2.
⏳ Solution not generated yet
Open this statement in Expert Maths AI: the step-by-step solution is computed on demand, checked by a second resolution, then published here for everyone.
📝 See the solutionHave a similar exercise? Get it solved step by step, for free.
🧮 Solve my exercise