Baccalauréat 2022 — Physics-Chemistry specialty, Amérique du Sud (jour 1) remplacement — exercise 3 : Exercise B - Implantable cardiac defibrillator (official exam paper)
Statement
EXERCISE B. IMPLANTABLE CARDIAC DEFIBRILLATOR
Keywords: charging and discharging of a capacitor, characteristic time, differential equation.
Defibrillation is a method used to regulate the heart rhythm. It consists in applying a very brief “electric shock” to the patient’s heart. An internal defibrillator is a small device implanted in the patient’s chest. This device has three fundamental elements:
- a lithium battery providing the energy needed for the operation of the device. This battery delivers an open-circuit voltage $U_g = 3{,}0\ \mathrm{V}$;
- electronic circuits that, among other things, analyze the patient’s heart rhythm, detect abnormalities, and trigger a shock when necessary;
- capacitors that store the energy that will be delivered during a shock;
- electrodes that connect the device to the patient’s heart.
The defibrillator can be modeled by the circuit below.
Circuit description: on the left, a battery of voltage $U_g = 3{,}0\ \mathrm{V}$ supplies a “voltage step-up circuit” that provides 800 V. At the output, a resistor $R$ is in series with a switch K1. After K1 there is a node connected to a capacitor of capacitance $C = 50\ \mu\mathrm{F}$, with voltage $u_C$ oriented upward and current $i$ oriented downward. A switch K2 then connects this node to a resistor $r = 10\ \Omega$ representing the patient’s heart, drawn on the right with a heart symbol. The return path is through the common lower wire.
The operation of the defibrillator is divided into two phases:
– in the first phase, switch K1 is closed while K2 is open; at the beginning of this phase, taken as the origin of time, the capacitor is discharged;
– in the second phase, switch K2 is closed while K1 is open; this is the phase during which the shock occurs. The resistance $r$ models the electrical behavior of the heart.
1. The four graphs on the next page represent possible evolutions of the voltage across the capacitor as a function of time. Determine which one corresponds to the first operating phase, justifying your answer.
Graph no. 1: voltage in volt as a function of time; decreasing curve starting at about 800 V and tending toward 0 V.
Graph no. 2: voltage in volt as a function of time; negative increasing curve starting at about −800 V and tending toward 0 V.
Graph no. 3: voltage in volt as a function of time; increasing curve starting at 0 V and tending toward about 800 V.
Graph no. 4: voltage in volt as a function of time; decreasing curve starting at 0 V and tending toward about −800 V.
At the end of the first phase, once the capacitor has finished charging, we move on to the second operating phase.
2. Establish the differential equation satisfied by the voltage $u_c(t)$ during this second phase.
3. At time $t_1$ switch K2 is closed. Verify that the solution of this differential equation can be written in the form:
$u_c(t) = A\cdot \exp\left(\dfrac{t-t_1}{\tau}\right)$.
Express the characteristic time $\tau$ in terms of $r$ and $C$ and calculate its value.
4. Determine the value of the parameter $A$ knowing that at the instant $t = t_1$, the voltage across the capacitor $u_c(t_1)$ is 800 V.
5. Estimate the approximate duration of the “electric shock”. Comment.
6. Give the shape of the voltage across the capacitor as a function of time during a complete capacitor charge–discharge cycle.
⏳ Solution not generated yet
Open this statement in Expert Maths AI: the step-by-step solution is computed on demand, checked by a second resolution, then published here for everyone.
📝 See the solutionHave a similar exercise? Get it solved step by step, for free.
🧮 Solve my exercise