Baccalauréat 2022 — Physics-Chemistry specialty, Centres étrangers - Groupe 1 (jour 1) — exercise 2 : Exercise A - Spirulina (official exam paper)
Statement
Keywords: assay, absorbance, uncertainties
Spirulina is a product made from cyanobacteria that are generally dried and ground. This product is sold as a dietary supplement said to improve tone and vitality. Spirulina is very rich in phycocyanin, a blue pigment, also used as a natural food coloring.
A company marketing dehydrated spirulina uses the phycocyanin content as a quality criterion for its production.
For optimal quality of the manufactured product, the phycocyanin content must be between 10 and 15 grams for 100 grams of dehydrated spirulina.
In part A, we examine the validity of an assay method by spectrophotometry; in part B, we use this method to determine the quality of the spirulina.
Part A – Validity of an assay method
A method for assaying phycocyanin by spectrometry is implemented according to the following protocol:
- A stock solution of phycocyanin, denoted S0, with mass concentration $C_0=25,0$ mg·L$^{-1}$, is available.
- Prepare a series of five solutions denoted S1, S2, S3, S4, S5, by dilution from the stock solution.
- Measure the absorbance A of each of the five solutions at a fixed wavelength.
- Plot the graph showing absorbance as a function of concentration.
- Measure the absorbance of the studied aqueous solution and deduce its concentration by graphical reading.
Data:
- It is assumed that, in the studied solutions, only phycocyanin absorbs light in the wavelength range considered.
- The absorption spectrum of an aqueous phycocyanin solution is given opposite (Figure 1).
Figure 1: absorption spectrum of phycocyanin. Graph of absorbance as a function of wavelength $\lambda$ in nm, from 500 to 700 nm. The absorbance is about 0.1 at 500 nm, increases to about 0.25 at 550 nm, reaches about 0.4 around 575 nm, has a maximum of about 0.65 around 620 nm, then decreases sharply to almost 0 around 670 nm and remains zero up to 700 nm.
1. Describe a dilution protocol allowing 100 mL of solution S2 with concentration $C_2=5,00$ mg·L$^{-1}$ to be obtained from solution S0.
2. Indicate an appropriate wavelength value for measuring the absorbance of the solution using the spectrophotometer.
To validate the assay method used, an aqueous phycocyanin standard solution, denoted SE, with known mass concentration $C_E=15,0$ mg·L$^{-1}$, is available. We therefore first want to know whether this method makes it possible to recover this value.
The table below summarizes the results obtained.
Table:
Solution: S1 ; S2 ; S3 ; S4 ; S5 ; SE.
Phycocyanin concentration in mg·L$^{-1}$: 2,00 ; 5,00 ; 8,00 ; 10,0 ; 20,0 ; —.
Absorbance A: 0,050 ; 0,20 ; 0,30 ; 0,37 ; 0,72 ; 0,54.
The scatter plot of absorbance for different mass concentrations of phycocyanin in the solutions is given below (Figure 2).
Figure 2: absorbance as a function of phycocyanin concentration. Graph with A on the y-axis from 0 to 0.7 and concentration in mg/L on the x-axis from 0 to 20. Approximate points: (2,00 ; 0,050), (5,00 ; 0,20), (8,00 ; 0,30), (10,0 ; 0,37), (20,0 ; 0,72).
3. State the Beer-Lambert law. Discuss the agreement of the measurements obtained with this law.
4. Stating the method used, determine the mass concentration $C_E$ of solution SE.
The same procedure is repeated 10 times. The results obtained are collected below.
Table of $C_E$ values (in mg·L$^{-1}$): 14,2 ; 14,7 ; 15,2 ; 15,9 ; 14,7 ; 14,1 ; 14,9 ; 14,4 ; 15,1 ; 14,6.
The standard deviation of this series of measurements is $\sigma=0,53$ mg·L$^{-1}$.
The standard uncertainty $u(X)$ of a quantity X associated with the mean of N measurements is given by:
$u(X)=\dfrac{\sigma}{\sqrt{N}}$
5. Calculate the mean value $\overline{C_E}$ and the standard uncertainty $u(C_E)$ associated with this series of measurements. Write the result of this measurement with its standard uncertainty, keeping three significant figures for the value of $C_E$.
6. Draw a conclusion regarding the validity of the assay method.
Part B – Quality control of the spirulina
This assay method is used to verify the phycocyanin content of the dehydrated spirulina produced by the company.
The spirulina solution to be assayed, denoted S, is prepared by dissolving 5,0 mg of dehydrated spirulina in 50,0 mL of demineralized water. The absorbance of this solution, measured under the same experimental conditions as before, is $A_S=0,44$.
7. Determine the mass concentration of phycocyanin in the spirulina solution S.
8. Calculate the phycocyanin content, expressed in g per 100 g, of dehydrated spirulina. Conclude on the quality of the dehydrated spirulina.
⏳ Solution not generated yet
Open this statement in Expert Maths AI: the step-by-step solution is computed on demand, checked by a second resolution, then published here for everyone.
📝 See the solutionHave a similar exercise? Get it solved step by step, for free.
🧮 Solve my exercise