Solved exercises🧮 Solve my exercise

Baccalauréat 2022 — Physics-Chemistry specialty, Métropole, Mayotte, La Réunion, Antilles Guyane (jour 1) remplacement — exercise 1 : Methanoic acid (official exam paper)

PhysicsLevel : High schoolMethanoic acid🌐 Lire en français
Statement
Methanoic acid, or formic acid, is produced by red ants, which use it to defend themselves. It is synthesized industrially to be used in many fields such as textiles, food processing, and even the manufacture of solvents. The aims of this exercise are to study the acid-base properties of methanoic acid and then its use in the synthesis of ethyl methanoate, which is an organic solvent. Data: - acid-base pair methanoic acid / methanoate ion: HCOOH(aq) / HCOO⁻(aq); - table of infrared (IR) absorption band data: C=O bond: wavenumber 1700 – 1800 cm⁻¹, appearance of the band strong and narrow; O–H bond (carboxylic acid): wavenumber 2500 – 3200 cm⁻¹, appearance of the band strong and broad; C–H bond: wavenumber 2800 – 3000 cm⁻¹, appearance of the band strong and narrow. - physico-chemical properties of different chemical species: methanoic acid: molecular formula CH₂O₂, molar mass 46,0 g·mol⁻¹, boiling point 101 °C; ethanol: molecular formula C₂H₆O, molar mass 46,1 g·mol⁻¹, boiling point 79 °C; ethyl methanoate: molecular formula C₃H₆O₂, molar mass 74,1 g·mol⁻¹, boiling point 54 °C; water: molecular formula H₂O, molar mass 18,0 g·mol⁻¹, boiling point 100 °C. - on the label of the bottle of the commercial concentrated methanoic acid used, it is stated that the minimum mass fraction is 85 %. The measured density of this product is 1,19. 1. Acid-base properties of methanoic acid To study the acid-base properties of methanoic acid, an aqueous solution of methanoic acid, denoted S, is prepared from 1,0 mL of commercial concentrated methanoic acid diluted in a 250 mL volumetric flask. A volume V = 25,0 mL of solution S is titrated and monitored by pH-metry. The titrant is an aqueous sodium hydroxide solution with concentration c_B equal to 0,20 mol·L⁻¹. The pH-metric titration curve is given in Figure 1. Figure 1. Experimental pH-metric titration curve: graph of pH as a function of the volume of titrant added in mL. Horizontal axis from 0,0 to 20,0 mL; vertical axis pH from 0 to 13. The curve starts at about pH 2,4 at 0 mL, increases slowly to about pH 4,0 at 8 mL, reaches about pH 4,8 at 10,5 mL, shows a sharp jump around 11 mL (points around pH 5,6 then pH 10,2–11,0) and then tends toward a plateau around pH 12,2 between 14 and 20 mL. Q1. Write the equation of the reaction underlying the titration. Q2. Determine the molar concentration of methanoic acid present in solution S. Q3. Deduce the mass fraction of methanoic acid in the bottle used. Comment. The pH values measured during this titration are used to determine whether methanoic acid can be considered a strong acid or a weak acid. Processing the pH measurements gives Figure 2. Figure 2. Distribution curves obtained from the pH measurements carried out during the titration: horizontal axis volume of titrant added in mL from 0,0 to 20,0; vertical axis percentages of species from 0 to 100 %. The distribution curve of HCOOH, in dashes, decreases linearly from 100 % at 0 mL to 0 % at about 10,8 mL. The distribution curve of HCOO⁻, in dotted lines, increases linearly from 0 % at 0 mL to 100 % at about 10,8 mL, then remains at 100 % up to 20 mL. The two curves cross at about 5,5 mL at 50 %. Q4. Write the equation of the reaction whose thermodynamic equilibrium constant corresponds to the acid dissociation constant K_A of the methanoic acid / methanoate ion pair. Q5. Estimate, explaining the method, using Figures 1 and 2, the value of the acid dissociation constant K_A of the methanoic acid / methanoate ion pair at the temperature of the titration. The tabulated value of the acid dissociation constant associated with this pair is equal to 1,75×10⁻⁴ at 25 °C. Q6. Identify one cause explaining the difference between the tabulated value and the value calculated in question Q5 for the acid dissociation constant K_A of the methanoic acid / methanoate ion pair. We study an aqueous solution of methanoic acid with initial concentration in solute added c_A. Q7. Show that the reaction quotient, denoted Q_r, associated with the reaction written in question Q4, is: $Q_r=\dfrac{[\mathrm{H_3O^+}]^2}{(c_A-[\mathrm{H_3O^+}])\cdot c^\circ}$ with c° the standard concentration. Q8. Show that the value of K_A at a given temperature can be estimated using the following relation: $K_A=\dfrac{\tau_f^2\cdot c_A}{(1-\tau_f)\cdot c^\circ}$ with τ_f the final extent ratio. The extent ratio τ_f satisfies a 2nd-degree equation of the form: $A\cdot \tau_f^2 + B\cdot \tau_f + C = 0$ with A, B and C constants. The calculation of the extent ratio is carried out using a program written in Python, an excerpt of which is given in Figure 3. Figure 3. Excerpt from the program written in Python: 4 # Requests for useful values 5 cA=float(input("Indicate the given concentration cA (in mol/L) of the acid:")) 6 KA=float(input("Indicate the value of the acid dissociation constant KA :")) 7 c0 = 1.0 # value of the standard concentration in mol/L 8 9 # 2nd-degree equation satisfied by the extent ratio 10 # equation of the form: A*tau^2 + B*tau + C = 0 11 A = ? # expression for A 12 B = ? # expression for B 13 C = ? # expression for C Q9. Complete lines 11, 12 and 13 so that the program can be executed. Detail the method. For an aqueous solution of methanoic acid with given concentration equal to 8,8×10⁻² mol·L⁻¹, the result obtained by the program is given below: Indicate the given concentration cA (in mol/L) of the acid:0.088 Indicate the value of the acid dissociation constant KA :1.75e-4 There are 2 possible solutions for the final extent ratio: tau1 = -0.046 tau2 = 0.044 Q10. From the results above from the program, determine, with justification, whether methanoic acid can be considered a strong acid or a weak acid in water under the experimental conditions. 2. Synthesis of ethyl methanoate from methanoic acid Ethyl methanoate can be used, for example, as an organic solvent, but also to give a rum odor to a food product. Ethyl methanoate is synthesized from methanoic acid and ethanol. The equation for the reaction modelling this chemical transformation can be written: H–C(=O)–OH + CH₃–CH₂–OH ⇌ H–C(=O)–O–CH₂–CH₃ + H₂O. Q11. Write on your answer sheet the semi-developed formula of ethyl methanoate, circle the characteristic group and name the associated functional family. Q12. The IR spectra of methanoic acid and ethyl methanoate are given in Figure 4. Assign, with justification, each spectrum to the corresponding chemical species. Figure 4. Infrared (IR) spectra of two molecules. Spectrum no. 1: transmittance as a function of wavenumber, with strong and narrow bands around 3000 cm⁻¹ and especially near 1700 cm⁻¹, many bands below 1500 cm⁻¹, absence of a very broad O–H band between 2500 and 3200 cm⁻¹. Spectrum no. 2: strong and broad absorption between about 2500 and 3200 cm⁻¹, strong band near 1700 cm⁻¹, many bands around 1500–800 cm⁻¹. The synthesis of ethyl methanoate is carried out according to the following protocol: - introduce into a flask 11,5 g of ethanol, 11,5 g of methanoic acid, 5 drops of concentrated sulfuric acid and a few grains of pumice; - heat under reflux for 45 min; - allow to cool. Q13. State one advantage of using a reflux setup. To determine the yield of the synthesis, a titration is carried out of the methanoic acid remaining in the reaction mixture at the end of the synthesis. It is deduced that the amount of substance of methanoic acid remaining is equal to 0,13 mol. Q14. Calculate the yield of this synthesis. To optimize the yield of the synthesis, some experimental conditions are modified. The different modifications are presented in the table in Figure 5. Figure 5. Different conditions for the synthesis of ethyl methanoate: route no. 1: using a reflux setup, react for 45 minutes 0,50 mol of ethanol, 0,25 mol of methanoic acid, 5 drops of concentrated sulfuric acid and a few grains of pumice; yield 67 %. Route no. 2: using a reflux setup, react for 45 minutes 1,0 mol of ethanol, 0,25 mol of methanoic acid, 5 drops of concentrated sulfuric acid and a few grains of pumice; yield 76 %. Route no. 3: using a fractional distillation setup, react for 45 minutes 0,50 mol of ethanol, 0,25 mol of methanoic acid, 5 drops of concentrated sulfuric acid and a few grains of pumice; yield 93 %. During the synthesis using route no. 3, the thermometer at the top of the distillation column (Vigreux column) indicates a temperature of 54 °C. Q15. Using the table in Figure 5, identify the experimental conditions implemented in the protocols that make it possible to optimize the yield of the synthesis.
⏳ Solution not generated yet

Open this statement in Expert Maths AI: the step-by-step solution is computed on demand, checked by a second resolution, then published here for everyone.

📝 See the solution

Have a similar exercise? Get it solved step by step, for free.

🧮 Solve my exercise