Baccalauréat 2022 — Physics-Chemistry specialty, Métropole, Mayotte, La Réunion, Antilles Guyane (jour 1) remplacement — exercise 4 : Exercise C — Checking the width of a suture th
Statement
EXERCISE C – CHECKING THE WIDTH OF A SUTURE THREAD
Keywords: diffraction of a light wave
A suture thread in surgery is used to bring together the two edges of a wound in order to facilitate healing. The diameter, shape and chemical composition of the threads are adapted to the type of tissue to be stitched (skin, muscle, tendon, nerve, etc.) as well as to the healing time and the size of the wound.
During manufacturing, industrial companies can in particular check the diameter of a thread using devices based on the diffraction of laser light (figure 1).
Figure 1. Device designed to check the diameter of thin threads: photograph of a small industrial laser sensor.
In this exercise, we study the physical principle used in a device for checking the diameter of a thread, then we focus on a suture thread sold in a pharmacy.
Data:
- wavelength of the laser used: λ = 532 nm;
- for angles θ much smaller than 1 rad, we have: tan(θ) ≈ θ with θ in radians;
- extract from the American nomenclature called “USP” and correspondence with the diameter of the threads: USP system 0: thread diameter 0.350 to 0.399 mm; USP system 2/0: 0.300 to 0.349 mm; USP system 3/0: 0.200 to 0.299 mm; USP system 4/0: 0.150 to 0.199 mm; USP system 5/0: 0.100 to 0.149 mm.
1. Physical principle used by a device for checking the diameter of a thread
To illustrate this principle in the laboratory, a laser emitting a wave of wavelength λ and a thread of known diameter a are placed on an optical bench. A screen is placed at a distance D from the thread. The width L of the central bright fringe in the diffraction pattern is measured directly on the screen (figure 2).
Figure 2. Setup illustrating the physical principle used by the device for checking the diameter of a thread: a laser emits an incident beam toward a vertical thread of width a. The diffracted beam forms on a screen located at distance D a central bright fringe of width L. The angle θ is shown between the central axis and each of the two rays going to the edges of the central bright fringe; thus the half-width corresponds to L/2 at distance D.
Q1. State qualitatively how the characteristic diffraction angle θ varies with the diameter a of the thread.
Q2. Using figure 2, write the relation between the characteristic diffraction angle θ and the quantities D and L.
Q3. Derive the expression for the width L of the central bright fringe in the diffraction pattern as a function of λ, D and a.
The width of the central bright fringe in the diffraction pattern is measured for seven threads of known diameters a. L is then plotted as a function of 1/a.
Figure 3. Graph of L as a function of 1/a: horizontal axis 1/a in m⁻¹ from 0 to 35000; vertical axis L in m from 0 to 0,06. The experimental points are approximately aligned on a straight line passing close to the origin: (5000 ; 0,009), (6600 ; 0,011), (10000 ; 0,017), (12500 ; 0,020), (16600 ; 0,027), (25000 ; 0,041), (33300 ; 0,054).
Q4. Check that the experimental results in figure 3 are consistent with the expression obtained in question Q3.
Q5. Show that the following model accounts for the experimental results: $L = 1,6\times10^{-6}\times \dfrac{1}{a}$ with a and L expressed in m.
2. Measuring the diameter of a suture thread sold in a pharmacy
Part of the label of the package containing a blue polyamide suture thread sold in a pharmacy is shown below. Label: “Polyamide monofilament, non-absorbable”, colour “BLUE”, indication “5/0”.
The following diffraction pattern is obtained (figure 4) using the experimental setup described in figure 2.
Figure 4. Photograph of the screen of the checking device: bright white central spot on a green/blue background, with secondary spots on either side on a horizontal axis. A dotted grid is visible; a horizontal double arrow indicates that the spacing between two neighbouring dotted vertical lines is 1,0 cm. The central spot extends over about 1,0 cm in width, slightly more depending on the possible reading.
Q6. Using figure 4, estimate the diameter of this suture thread.
The standard uncertainty on the experimental value of the thread diameter is given, under the conditions of the experiment, by the following relation: $u(a)=a\times \dfrac{u(L)}{L}$ with u(L) = 1×10⁻³ m.
Q7. Analyze the measurement result in relation to the reference range indicated on the label of the suture thread.
⏳ Solution not generated yet
Open this statement in Expert Maths AI: the step-by-step solution is computed on demand, checked by a second resolution, then published here for everyone.
📝 See the solutionHave a similar exercise? Get it solved step by step, for free.
🧮 Solve my exercise