Solved exercises🧮 Solve my exercise

Baccalauréat 2022 — Physics-Chemistry specialty, Nouvelle-Calédonie (jour 1) — exercise 3 : Groundwater Quality on the Coast (official exam paper)

PhysicsLevel : High schoolGroundwater Quality on the Coast🌐 Lire en français
Statement
EXERCISE B: Groundwater Quality on the Coast KEYWORDS FOR EXERCISE B: dissolution, mass concentration, conductimetric titration. The coastal groundwater contained in aquifers is essential both for human activities and for the environment, but intrusions of seawater into these aquifers can lead to irreversible pollution. This risk of saltwater intrusion increases because of excessive pumping exploitation of groundwater in order to cope with a population that continues to grow on the coast. Thus, monitoring the quality of groundwater along the coastal margin is necessary in order to avoid this risk of saltwater intrusion into the aquifer. Figure 1: When a borehole is operated in a coastal aquifer, a drawdown cone forms at the surface of the aquifer, which modifies the interface between fresh water and salt water. Source: after https://library.ensh.dz. Description: two cross-sectional diagrams of a coastal aquifer. On the left, without pumping: the ground surface lies above a lens of fresh water above the salt water; the free surface of the fresh-water aquifer is indicated; a height relation is indicated $H = 40h$ between the fresh-water level and the fresh water/salt water interface. On the right, with pumping: a well pumps fresh water, the groundwater level is locally lowered and the theoretical interface between fresh water and salt water rises in the shape of a cone, bringing salt water closer to the pumping zone. The aim of this exercise is to determine the mass concentration of chloride ion in a water sample in order to prevent any possible intrusion of seawater into the underground aquifer. A. The salty water of the Mediterranean Sea Concentration classes can be defined according to chloride ion content: Table: - Mass concentration of chloride ions (mg·L⁻¹) less than 50: observation “No contamination”. - Concentration between 50 and 200: observation “So-called ‘natural’ concentration, the water is drinkable”. - Concentration between 200 and 500: observation “The water cannot be used for drinking water production. Except in exceptional cases, such concentrations are not natural.” - Concentration greater than 500: observation “Significant contamination of the structure by chlorides”. A.1. State the value of the minimum mass concentration $c_m$ in chloride ion $\mathrm{Cl^-_{(aq)}}$ from which groundwater can be considered contaminated by a seawater intrusion making it undrinkable. A.2. Data: Atomic molar masses (in $\mathrm{g\cdot mol^{-1}}$): $\mathrm{Cl^-}$: 35,5; $\mathrm{Na^+}$: 23,0; $\mathrm{Mg^{2+}}$: 24,3. We will first determine the mass concentration of chloride ion in Mediterranean seawater. The presence of chloride ions $\mathrm{Cl^-}$ is mainly due to the dissolution of sodium chloride $\mathrm{NaCl_{(s)}}$ in water, but magnesium chloride also contributes to the salinity of seawater. The reaction equation modeling the dissolution of magnesium chloride $\mathrm{MgCl_2{}_{(s)}}$ in water is: $\mathrm{MgCl_2{}_{(s)} \rightarrow Mg^{2+}_{(aq)} + 2\ Cl^-_{(aq)}}$. A.2.1. Knowing that the amount-of-substance concentration of magnesium chloride $\mathrm{MgCl_2{}_{(s)}}$ in seawater is $c = 4{,}0 \times 10^{-2}\ \mathrm{mol\cdot L^{-1}}$, determine the amount-of-substance concentration of chloride ions $\mathrm{Cl^-_{(aq)}}$ supplied by $\mathrm{MgCl_2{}_{(s)}}$, denoted $[\mathrm{Cl^-_{(aq)}}]$. A.2.2. The mass concentration of chloride ions $\mathrm{Cl^-_{(aq)}}$ supplied by sodium chloride $\mathrm{NaCl_{(s)}}$ in water is $c_m = 16{,}5\ \mathrm{g\cdot L^{-1}}$. Determine the total mass concentration of chloride ions in the Mediterranean Sea. B. Titration of chloride ions in the freshwater of groundwater The mass concentration of chloride ions in the fresh water located close to the pumping zone must be monitored. For this purpose, a 50,0 mL water sample is taken at the pumping site. The chloride ions in this water sample are then titrated with a silver nitrate solution $(\mathrm{Ag^+_{(aq)} + NO_3^-{}_{(aq)}})$ with an amount-of-substance concentration of $1{,}00 \times 10^{-2}\ \mathrm{mol\cdot L^{-1}}$. The titration is monitored by conductimetry. The reaction equation for the titration is: $\mathrm{Ag^+_{(aq)} + Cl^-_{(aq)} \rightarrow AgCl_{(s)}}$ Data: Ionic molar conductivities at 25 °C ($\mathrm{S\cdot m^2\cdot mol^{-1}}$): $\lambda_{Cl^-_{(aq)}} = 76{,}3 \times 10^{-4}$; $\lambda_{Ag^+_{(aq)}} = 71{,}4 \times 10^{-4}$; $\lambda_{NO_3^-{}_{(aq)}} = 61{,}9 \times 10^{-4}$. B.1. Identify, among the three curves I, II and III proposed on the graph in Figure 2 on the following page, the one that represents the simulated evolution of the conductivity $\sigma$ of the mixture as a function of the volume $V$ of silver nitrate solution added. Justify your answer. Figure 2: graph mentioned as appearing on the following page in the subject; it is not present in the pages provided here. B.2. The volume added at equivalence is $V_{eq} = 13{,}0\ \mathrm{mL}$. Deduce whether the sample water can be used for drinking water supply. The candidate is invited to take initiatives and present the method followed even if it did not lead to a result. The method is assessed and must be properly presented.
⏳ Solution not generated yet

Open this statement in Expert Maths AI: the step-by-step solution is computed on demand, checked by a second resolution, then published here for everyone.

📝 See the solution

Have a similar exercise? Get it solved step by step, for free.

🧮 Solve my exercise