Solved exercises🧮 Solve my exercise

Baccalauréat 2022 — Physics-Chemistry specialty, Amérique du Sud (jour 2) remplacement — exercise 2 : Exercise A. PLA or polylactic acid (official exam paper)

PhysicsLevel : High schoolExercise A. PLA or polylactic acid🌐 Lire en français
Statement
EXERCISE A. PLA OR POLYLACTIC ACID Keywords: titration with colorimetric monitoring PLA, or polylactic acid, is a polymer whose demand is growing. It is used in the packaging sector, in fibres, disposable tableware, and also in materials for 3D printers. It is often bio-based because it is obtained from renewable resources (corn starch) and can advantageously replace many petrochemical polymers, because it has properties similar to those of PS (polystyrene) or PET (polyethylene terephthalate). In addition, chemical recycling is possible. It can therefore be an alternative to pollution of natural environments by plastics. 1. The lactic acid molecule The topological formula of the lactic acid molecule is given: [Topological formula: molecule $\mathrm{CH_3-CH(OH)-COOH}$, i.e. a chain of three carbon atoms bearing a carboxylic acid function $-\mathrm{COOH}$ on carbon 1 and a hydroxyl group $-\mathrm{OH}$ on carbon 2.] 1.1. In the official nomenclature, lactic acid is called 2-hydroxypropanoic acid. Justify this name. 1.2. Write the acid-base pair associated with lactic acid using Lewis structures. A lactic acid solution with solute concentration $C=2{,}0\times10^{-2}\ \mathrm{mol\cdot L^{-1}}$ has a pH equal to $2{,}8$. 1.3. Indicate whether, under these experimental conditions, this acid is strong or weak. Justify. 1.4. Write the equation for the reaction that models the chemical transformation between lactic acid and water, using AH to denote lactic acid. 2. Synthesis of polylactic acid (PLA) One of the methods used for the industrial polymerization of lactic acid uses a reaction of the type: (1) $\mathrm{R_1-COOH}+\mathrm{R_2-OH}\rightleftharpoons \mathrm{R_1-COO-R_2}+\mathrm{H_2O}$ where $\mathrm{R_1}$ and $\mathrm{R_2}$ are alkyl groups. 2.1. State the functional family to which the organic product formed belongs. The lactic acid molecules react with each other in a chain according to reaction (1) and form PLA, the beginning of which is shown below: [Representation of the beginning of a PLA chain: left end bearing $\mathrm{HO-}$ then a succession of groups derived from lactic acid linked by ester functions, of the type $\mathrm{-O-CH(CH_3)-CO-}$, repeated along the chain with ellipses on the right. Five groups of atoms are boxed with dashed lines and numbered no. 1 to no. 5; the boxes delimit various portions of the chain, some including one complete repeating unit and others only an end group or a longer portion.] 2.2. Among the boxed groups of atoms, indicate which one corresponds to the repeat unit of the polymer obtained. 3. Degradation of polylactic acid (PLA) Depolymerization of PLA consists in reacting the polymer with methanol. PLA is thus converted into methyl lactate. This can then be converted into lactide, which can later be converted back into the polymer, in the context of PLA recycling. [Recycling diagram: at the top, "Polylactic acid". A downward arrow to the right labeled "Depolymerization" leads to "Methyl lactate", represented by the formula $\mathrm{CH_3-CH(OH)-COOCH_3}$. A horizontal arrow leads back to "Lactide", represented as a six-membered cyclic diester derived from two lactic units. An upward arrow to the left labeled "Polymerization" leads from lactide to polylactic acid. In the center is a circular recycling arrow. Source: after Industrial & Engineering Chemistry Research, https://pubs.acs.org/doi/10.1021/acs.iecr.0c01122#] PLA depolymerization is carried out at different temperatures: $70\ \degree\mathrm{C}$, $90\ \degree\mathrm{C}$ and $110\ \degree\mathrm{C}$. The following curves are obtained: [Figure 1: study of the chemical degradation of PLA. Horizontal axis: $t$ in min from $0$ to $100\ \mathrm{min}$. Vertical axis: $[\mathrm{PLA}]$ in $\mathrm{mmol\cdot L^{-1}}$ from $0$ to $1{,}0$. Three decreasing curves start from $1{,}0\ \mathrm{mmol\cdot L^{-1}}$ at $t=0$. The curve at temperature $T_1$, marked by triangles, decreases slowly: about $0{,}75$ at $10\ \mathrm{min}$, $0{,}56$ at $20\ \mathrm{min}$, $0{,}42$ at $30\ \mathrm{min}$, $0{,}32$ at $40\ \mathrm{min}$, $0{,}24$ at $50\ \mathrm{min}$, $0{,}18$ at $60\ \mathrm{min}$, $0{,}14$ at $70\ \mathrm{min}$, $0{,}10$ at $80\ \mathrm{min}$, $0{,}075$ at $90\ \mathrm{min}$, $0{,}055$ at $100\ \mathrm{min}$. The curve at temperature $T_2$, marked by circles, decreases faster: about $0{,}53$ at $10\ \mathrm{min}$, $0{,}28$ at $20\ \mathrm{min}$, $0{,}15$ at $30\ \mathrm{min}$, $0{,}08$ at $40\ \mathrm{min}$, $0{,}04$ at $50\ \mathrm{min}$, $0{,}02$ at $60\ \mathrm{min}$, then close to $0$. The curve at temperature $T_3$, marked by squares, decreases very quickly: about $0{,}28$ at $10\ \mathrm{min}$, $0{,}08$ at $20\ \mathrm{min}$, $0{,}02$ at $30\ \mathrm{min}$, then close to $0$.] 3.1. Assign to $T_1$, $T_2$ and $T_3$ the corresponding temperature value. Justify. 3.2. Processing the curve obtained at temperature $T_1$ gives the following results: Table: Date $t$ (min): $0$ ; $20$ ; $40$ ; $60$ ; $80$. $[PLA]$ ($\mathrm{mol\cdot L^{-1}}$): $1{,}0\times10^{-3}$ ; $5{,}6\times10^{-4}$ ; $3{,}2\times10^{-4}$ ; $1{,}8\times10^{-4}$ ; $1{,}0\times10^{-4}$. Volumetric rate of disappearance of PLA ($\mathrm{mol\cdot L^{-1}\cdot s^{-1}}$): ? ; $2{,}7\times10^{-7}$ ; $1{,}5\times10^{-7}$ ; $8{,}5\times10^{-8}$ ; $4{,}8\times10^{-8}$. 3.2.1. Define the volumetric rate of disappearance of PLA. 3.2.2. Graphically determine the value of the volumetric rate of disappearance of PLA at time $t=0\ \mathrm{s}$ for temperature $T_1$ in order to complete the table above. Describe the method used. 3.2.3. Show, by making the reasoning explicit, that the evolution of the PLA concentration follows a first-order rate law.
⏳ Solution not generated yet

Open this statement in Expert Maths AI: the step-by-step solution is computed on demand, checked by a second resolution, then published here for everyone.

📝 See the solution

Have a similar exercise? Get it solved step by step, for free.

🧮 Solve my exercise