Baccalauréat 2022 — Physics-Chemistry specialty, Nouvelle-Calédonie (jour 2) — exercise 4 : Anatomy of a Capacitor (official exam paper)
Statement
EXERCISE C – Anatomy of a capacitor
Keywords for EXERCISE C: capacitor, capacitance, series RC circuit.
Polycarbonates are good insulators and, as such, are used in electronics to make capacitors. Polycarbonate capacitors are made by alternating metallized sheets with polycarbonate sheets a large number of times. These types of capacitors have capacitances that do not vary much with temperature. They can have operating voltages up to 400 V peak-to-peak and can be used in a temperature range from $-55\ ^\circ\mathrm{C}$ to $+125\ ^\circ\mathrm{C}$.
In Part A the capacitance of a polycarbonate capacitor is determined within the RC circuit model and then, in Part B, the study focuses on the anatomy of this capacitor.
Part A: Determination of the capacitance of a polycarbonate capacitor
Consider the electrical circuit whose diagram is shown below, in which the voltage source is ideal and delivers an electrical voltage $E=12\ \mathrm{V}$.
Diagram description: series circuit consisting of an ideal voltage source with terminals $+$ and $-$, a switch K, an ohmic conductor of resistance $R=30\ \mathrm{k\Omega}$ and a capacitor of capacitance $C$.
The capacitor, of capacitance $C$, is initially uncharged. At time $t=0$, the switch K is closed.
A.1. Copy the circuit diagram onto your answer sheet, then indicate the direction of the electric current, of intensity $i$, flowing in the circuit during the transient regime, as well as the voltages $E$, $u_R$ and $u_C$ taken respectively across the source, the ohmic conductor of resistance $R$ and the capacitor of capacitance $C$.
A.2. Establish the relationship between the voltages in this circuit.
A.3. Express the charge $q$ of the capacitor as a function of the voltage across its terminals.
A.4. Show that the differential equation, of which the voltage $u_C$ across the capacitor is a solution, can be written in the form:
$\dfrac{du_C}{dt}+\dfrac{u_C}{\tau}=\dfrac{E}{\tau}$
with $\tau$ a constant whose expression you will specify.
A.5. Propose a name for the constant $\tau$. Show that this constant has the dimension of a time.
A.6. The time variation of the voltage across the capacitor is displayed. The corresponding graph is provided in APPENDIX 2 TO BE SUBMITTED WITH THE ANSWER SHEET (p15/15). This appendix is not present in the pages provided.
A.6.1. Determine the value of $\tau$ graphically. Clearly show the construction lines used on the graph in APPENDIX 2 TO BE SUBMITTED WITH THE ANSWER SHEET (p15/15).
A.6.2. Deduce the value of the capacitance $C$ of the capacitor, determined by this method within the RC circuit model.
Part B: Anatomy of a polycarbonate capacitor
There are different types of capacitors. The parallel-plate capacitor is one of the simplest. It consists of two parallel plates of area $S$ separated by an insulator of thickness $a$. The thickness of the plates is negligible compared with the thickness of the insulator.
Diagram description: parallel-plate capacitor made up of two parallel metallic plates of area $S$, separated by an insulator of thickness $a$; two connecting wires are each connected to one plate.
The capacitance of the parallel-plate capacitor is given by the relation:
$C_0=\dfrac{\varepsilon\times S}{a}$
where $\varepsilon$ is a constant that depends on the material used as the insulator. For polycarbonate, this value is $\varepsilon=2{,}57\times 10^{-11}\ \mathrm{F\cdot m^{-1}}$.
B.1. Describe the influence of the geometric characteristics of the parallel-plate capacitor on the value of its capacitance.
B.2. The anatomy of the usual capacitor shows a stack of metallic plates with the insulator (here, polycarbonate) corresponding to a parallel connection of $n$ identical capacitors of capacitance $C_0$ (see the following figure). The capacitance $C$ of this capacitor is expressed by the relation $C=n\times C_0$.
Examples of capacitances of a few capacitors as a function of their geometric characteristics:
Capacitance $C\pm2\%$ (nF) : 33,0 ; $L\pm0{,}5$ (mm) : 11,0 ; $h\pm0{,}5$ (mm) : 9,0 ; $e\pm0{,}5$ (mm) : 6,0.
Capacitance $C\pm2\%$ (nF) : 47,0 ; $L\pm0{,}5$ (mm) : 11,0 ; $h\pm0{,}5$ (mm) : 10,0 ; $e\pm0{,}5$ (mm) : 6,0.
Capacitance $C\pm2\%$ (nF) : 68,0 ; $L\pm0{,}5$ (mm) : 14,0 ; $h\pm0{,}5$ (mm) : 10,0 ; $e\pm0{,}5$ (mm) : 7,0.
Source: Exxelia, manufacturer of electronic components.
The capacitor studied in Part A is made from a number $n$ of stacks of elementary parallel-plate capacitors all connected in parallel.
⏳ Solution not generated yet
Open this statement in Expert Maths AI: the step-by-step solution is computed on demand, checked by a second resolution, then published here for everyone.
📝 See the solutionHave a similar exercise? Get it solved step by step, for free.
🧮 Solve my exercise