Baccalauréat 2022 — Physics-Chemistry specialty, Mayotte — exercise 1 : Some Uses of the Capacitor (official exam paper)
Statement
EXERCISE 1 common to all candidates (10 points)
SOME USES OF THE CAPACITOR
This exercise focuses on presenting two applications of capacitors.
Part 1. The capacitive balance
In everyday life, some electronic scales use a variable-capacitance sensor to measure the mass of objects. To understand how such a device works, we consider in this part a very simplified model in which the scale is modeled by a capacitor with a moving plate connected to the weighing pan and a fixed plate connected to the scale support.
Simplified model of a laboratory balance
The model studied is shown below.
Diagram description: a horizontal weighing pan is supported by two springs on a scale support. At the center, in air, there is a parallel-plate capacitor whose upper plate is connected to the pan and whose lower plate is connected to the support; the distance between the plates is denoted by $e_0$ when empty. Small stops prevent contact between the plates. The vertical distance between the pan and the support is denoted by $D_0$.
When the scale is empty (no mass on the pan), the distance between the two plates is denoted by $e_0$. When an object of mass $M$ is placed on the weighing pan, the plates of the capacitor move closer together, thereby changing its capacitance $C$. The two plates cannot come into contact thanks to the presence of small stops whose size is negligible compared with $e_0$.
Measuring the capacitance $C$ with an electronic device then makes it possible to determine the mass $M$ of the object.
Capacitance of a parallel-plate capacitor
Diagram description: parallel-plate capacitor connected to an electronic device; the plates are two rectangular plates with dimensions $L=4,0\ \text{cm}$ and $\ell=3,0\ \text{cm}$, separated by a distance $e$. Small stops have a height $h=0,50\ \text{mm}$.
It is assumed that the capacitance of the parallel-plate capacitor described above is given by: $C=\varepsilon_0\varepsilon_r\dfrac{S}{e}$.
With:
– $C$: capacitance of the capacitor in Farad (F);
– $S$: area of the plates;
– $\varepsilon_0$: permittivity of vacuum $\varepsilon_0=8,85\times10^{-12}\ \text{F}\cdot\text{m}^{-1}$;
– $\varepsilon_r$: relative dielectric permittivity of the insulator between the plates. For air: $\varepsilon_r=1,0$;
– $e$: distance between the 2 plates;
– $e_0=1\ \text{cm}$.
1. Operating range of the balance
1.1. Determine the value of the capacitance $C_0$ of the capacitor when the balance is empty. Assume that $\varepsilon_r=1,0$. Comment.
1.2. State whether the capacitance of the capacitor increases or decreases when a mass is placed on the pan. Justify the answer qualitatively.
1.3. When an object of mass $M$ is placed on the pan, the distance between the pan and the support changes from $D_0$ to $D$ and the pan exerts on the object an action modeled by a force $\overrightarrow{F}$ directed upward. The value of this force is given by the relation: $F=k(D_0-D)$, with $k=980\ \text{N}\cdot\text{m}^{-1}$.
1.3.1. The object of mass $M$ being in equilibrium on the pan, verify that, knowing the distance $D$ between the pan and the support, one can deduce $M$ by the relation: $M=\dfrac{k}{g}(D_0-D)$ where $g$ is the gravitational field strength: $g=9,8\ \text{N}\cdot\text{kg}^{-1}$.
1.3.2. Assuming that the moving plate of the capacitor moves through the same distance as the pan when an object of mass $M$ is placed on it, calculate the maximum mass that this scale can measure.
2. Measuring the mass to be weighed
To determine the value of the capacitance $C$ of the capacitor and deduce the value of the mass resting on the pan, the charging of the capacitor is studied using the circuit below. At time $t=0$, the capacitor is discharged; the voltage $E$ is then applied to the circuit.
2.1. Show that the differential equation satisfied by the voltage across the terminals of the capacitor can be written as:
$RC\dfrac{du_c(t)}{dt}+u_c(t)=E$.
Diagram description of the electrical circuit: series circuit consisting of a capacitor of capacitance $C$ initially discharged, a resistor $R=10\ \text{M}\Omega$ and a DC voltage source $E$. The voltage $u_c(t)$ is indicated across the capacitor, the voltage $u_R(t)$ across the resistor, and the current intensity $i(t)$ circulates in the circuit.
2.2. Determine the expression of $\tau$ in terms of $R$ and $C$ so that the function $u_c(t)=E\left(1-\exp\left(-\dfrac{t}{\tau}\right)\right)$ is a solution of the previous differential equation.
The values of the voltage $u_c(t)$ across the capacitor are recorded over time for two different masses $M_1$ and $M_2$. The curves are provided in appendix 1 to be handed in with the script (graph 1).
2.3. For which curve, 1 or 2, of graph 1 is the capacitance value of the capacitor the highest? Justify.
2.4. Using graphs 1 and 2, determine the value of the weighed mass $M_2$. The method used must be indicated on the graphs provided in appendix 1 to be handed in with the script.
The candidate is invited to take initiatives and present the approach followed, even if it was unsuccessful. The approach is assessed and must be properly presented.
Part 2. Linear particle accelerator
In this part, we consider a linear particle accelerator made up of cylindrical metallic blocks separated by empty cavities, and including near their axis a tubular passage in which charged particles can move.
The particles, here protons, are accelerated in the cavities, where an electric field $\overrightarrow{E}$ exists. In the tubular passages, the electric field is zero. All cavities have the same length $d$.
In this exercise, we study the motion of a proton.
Diagram description: a voltage generator successively supplies cylindrical metallic blocks A, B, C, D aligned horizontally, separated by cavities 1, 2, 3 of length $d$. A particle source injects protons along the axis. The signs carried by the blocks alternate: A positive, B negative, C positive, D negative in the schematic diagram.
The protons are emitted by a source with negligible speed.
Data:
– mass of a proton: $m_p=1,67\times10^{-27}\ \text{kg}$;
– elementary electric charge: $e=1,60\times10^{-19}\ \text{C}$;
– expression for the magnitude of the electric field vector: $E=\dfrac{|U|}{d}$, where $U$ represents the voltage between two consecutive blocks and $d$ the distance separating them.
1. Modeling by a parallel-plate capacitor
The system consisting of a cavity and two adjacent blocks can be modeled by a parallel-plate capacitor (see diagram opposite) connected to a generator supplying a direct voltage $U_{AB}=1\ \text{kV}$. We study the acceleration of a proton inside the cavity.
A proton of charge $q=e$ enters the cavity, at O, at time $t_0=0,0\ \text{s}$ with zero initial speed and reaches plate B at point S with speed $v_S$.
Diagram description: two vertical plane plates model blocks A on the left and B on the right, separated by a distance $d$. The x-axis is horizontal from O to S, from block A to block B; the unit vector $\overrightarrow{j}$ is indicated to the right. The voltage $U_{AB}$ is shown between the plates.
1.1. Specify the sign of the charges carried by plates A and B of the capacitor if the proton is to be accelerated between these two plates. Justify the answer.
1.2. Express the magnitude $F_e$ of the electric force modeling the action exerted on the proton between the plates of the capacitor. Express the result in terms of $U_{AB}$, $q$ and $d$.
It is shown that the work of the electric force $\overrightarrow{F_e}$ between points O and S is: $W_{OS}=q\cdot U_{AB}$.
1.3. Use the work-energy theorem to show that the speed of the proton at point S is $v_S=\sqrt{\dfrac{2qU_{AB}}{m_p}}$.
1.4. Calculate the value of $v_S$.
2. Structure of the linear particle accelerator
For acceleration to continue in the different cavities, the polarity of each tube is alternately positive and negative: for this purpose, the generator supplies an alternating voltage $u_a(t)$ with period $T=5,0\times10^{-7}\ \text{s}$.
Graph description: square voltage $u_a(t)$ as a function of time; $u_a(t)=+U_{a\max}$ from $0$ to $T/2$, then $-U_{a\max}$ from $T/2$ to $T$, then $+U_{a\max}$ from $T$ to $3T/2$, then $-U_{a\max}$ thereafter.
The diagrams below represent the position of the proton at different times.
Diagram description of the three diagrams: blocks A, B, C, D are aligned; the cavities between A-B, B-C and C-D all have length $d$. The length of block A is denoted by $L_A$.
– At $t=0$: proton entering cavity 1; A has sign +, B sign –, C sign +, D sign –.
– At $t=T/2=2,5\times10^{-7}\ \text{s}$: proton entering cavity 2; polarities are reversed, A –, B +, C –, D +.
– At $t=T=5,0\times10^{-7}\ \text{s}$: proton entering cavity 3; polarities identical to the first diagram, A +, B –, C +, D –.
We denote by $d$ the distance between two blocks, $L_A$ the length of block A, $L_B$ the length of block B, etc.
2.1. Justify the need to change the sign of the voltage between blocks B and C when the particle passes from the first cavity to the second.
Within a block, the motion of a particle is assumed to be uniform rectilinear motion.
2.2. Justify that the proton must travel the length of one block plus the length of one cavity in $2,5\times10^{-7}\ \text{s}$.
2.3. Explain qualitatively why the blocks are increasingly longer in the linear accelerator.
In the 1970s, the Los Alamos linear proton accelerator (USA), 800 m long, made it possible to obtain protons with energy equal to $8,0\ \text{MeV}$ using a voltage $u_a(t)$ characterized by $U_{a\max}=1\ \text{kV}$. Recall that: $1\ \text{eV}=1,6\times10^{-19}\ \text{J}$.
2.4. Determine the number of accelerating cavities needed for a proton to reach an energy equal to $8,0\ \text{MeV}$. Assume that the gain in kinetic energy is the same for all cavities.
⏳ Solution not generated yet
Open this statement in Expert Maths AI: the step-by-step solution is computed on demand, checked by a second resolution, then published here for everyone.
📝 See the solutionHave a similar exercise? Get it solved step by step, for free.
🧮 Solve my exercise