Solved exercises🧮 Solve my exercise

Baccalauréat 2022 — Physics-Chemistry specialty, Métropole, La Réunion, Antilles Guyane — exercise 1 : The dye E127 (official exam paper)

PhysicsLevel : High schoolThe dye E127🌐 Lire en français
Statement
THE DYE E127 The dye E127, which is red in color, is used to color certain foods such as candied cherries. It is also found in medicines such as dental plaque disclosing agents. It is an ionic compound, with molecular formula Na₂C₂₀H₆I₄O₅, more simply written as Na₂Ery, present in solution in the form of Na⁺ and Ery²⁻ ions. The Ery²⁻ ions are one of the three acid-base forms of erythrosine. The aims of the exercise are to study the determination of this dye in a dental plaque disclosing agent, the synthesis of the most acidic form, written H₂Ery, of erythrosine, and the kinetics of its decolorization by bleach. Data: - simplified notation and structural formula of the different acid-base forms associated with erythrosine: table with three columns showing the simplified notations H₂Ery, HEry⁻ and Ery²⁻. The structural formulas shown correspond to an iodinated xanthene skeleton bearing four iodine atoms and one benzoic acid group; H₂Ery has a phenol group -OH and a carboxylic acid group -COOH, HEry⁻ has a phenol group -OH and a carboxylate -COO⁻, Ery²⁻ has a phenolate -O⁻ and a carboxylate -COO⁻. - $pK_A$ values at 25 °C of the acid-base couples associated with erythrosine: H₂Ery / HEry⁻: $pK_{A1}=2,4$; HEry⁻ / Ery²⁻: $pK_{A2}=3,8$. - molar masses of some species: table. Columns: Name; Dye E127; Most acidic form of erythrosine; Most acidic form of fluorescein; Diiodine. Simplified notation or molecular formula: Na₂Ery; H₂Ery; H₂Flu; I₂. Molar mass (g·mol⁻¹): 880; 836; 332; 254. 1. Determination of the dye E127 in a dental plaque disclosing agent A dental plaque disclosing agent is a solution sold in pharmacies that helps improve tooth brushing. It is prepared from dye E127. Data: - density of the dental plaque disclosing agent studied: $ρ=1,0$ g·mL⁻¹; - pH of the dental plaque disclosing agent studied: pH = 7,0; - color wheel: wheel showing the ranges red around 750 nm, orange around 600 nm, yellow around 580 nm, green around 530 nm, blue around 480 nm, violet around 400 nm; complementary colors are placed opposite one another, in particular red/green, orange/blue, yellow/violet. The IR and UV regions bracket respectively the large and small wavelengths. - absorption spectrum of an aqueous solution of dye E127 with amount concentration equal to $1,7×10^{-5}$ mol·L⁻¹ and pH equal to 7,0: graph of absorbance $A$ as a function of $λ$ from 400 to 700 nm. Absorbance is low around 400 nm ($A≈0,03$), increases slowly up to 500 nm ($A≈0,30$), reaches a maximum around 525 nm ($A≈0,73$), then decreases rapidly to become nearly zero above 570 nm. Q1. Using the structural formula of the H₂Ery form of erythrosine below, name the functional groups associated with the characteristic groups A, B and C. The formula shown is that of H₂Ery; group A circles an -OH group attached to an aromatic ring, group B circles a carbonyl function $C=O$ in the lactone/xanthene ring, and group C circles the -COOH group of carboxylic acid type. Q2. Identify, with justification, the form of erythrosine that predominates in the dental plaque disclosing agent studied. On the manufacturer’s website, it is stated that the dental plaque disclosing agent, red in color, is a hydroalcoholic solution containing dye E127 at 2 % by mass. In order to verify the previous statement about the mass percentage, the experiments described below are carried out. Preparation of the solution to be analyzed: - 0,5 mL of dental plaque disclosing agent is introduced into a 2,0 L volumetric flask, which is then filled to the mark with distilled water: solution S is obtained. Spectrophotometric calibration determination: - starting from an aqueous solution of dye E127 with amount concentration equal to $1,7×10^{-5}$ mol·L⁻¹, six daughter solutions are prepared by dilution; - the absorbance of each of these solutions is measured at an appropriate wavelength; the measurements are plotted on the graph in Figure 1; - the absorbance of solution S is measured at the same wavelength; one obtains $A=0,484$. Figure 1. Variation of absorbance as a function of the amount concentration of dye E127 added. Graph $A=f(c)$, with $c$ in µmol·L⁻¹ from 0 to 12 and $A$ from 0 to 1. The experimental points are approximately: (1,7 ; 0,14), (3,4 ; 0,30), (5,1 ; 0,44), (6,8 ; 0,59), (8,5 ; 0,74), (10,2 ; 0,90). The points are aligned along an increasing straight line passing close to the origin. Q3. Justify the red color of the dental plaque disclosing agent studied. Q4. After showing that the concentration of dye E127 added in the dental plaque disclosing agent is equal to $2,2×10^{-2}$ mol·L⁻¹, determine the mass percentage of dye E127 in the analyzed dental plaque disclosing agent. Comment. The candidate is invited to take initiatives and present the approach followed, even if it did not lead to a result. The approach is assessed and must be clearly presented. 2. Synthesis of erythrosine from fluorescein Erythrosine can be synthesized from another dye, fluorescein, in the presence of iodic acid and ethanol; the reaction equation modeling this synthesis is given below: H₂Flu + 4 I₂ → H₂Ery + 4 HI, in the presence of iodic acid and ethanol. The structural formulas shown display the H₂Flu form of fluorescein on the left, which is transformed into the H₂Ery form of erythrosine on the right by substitution of four aromatic hydrogen atoms by four iodine atoms. In a scientific publication, the following information is found: - the different steps of a synthesis protocol for erythrosine: step n°1: carry out the synthesis of the H₂Ery form of erythrosine from 5,0 g of fluorescein H₂Flu and 9,5 g of diiodine I₂, in the presence of ethanol and iodic acid; heat and stir the mixture for two hours at a temperature of 60 °C; step n°2: after cooling, filter the mixture using a Büchner funnel then wash the red solid obtained with water and ethanol; step n°3: measure the melting point of the red solid obtained. - the value of the synthesis yield $r$: $r=59$ %. According to N. Pietrancosta et al. / Bioorganic & Medicinal Chemistry 18 (2010) 6922–6933. Q5. Identify the role of steps n°1, n°2 and n°3 of the experimental synthesis protocol of erythrosine. Q6. Identify the operation in the experimental protocol carried out to optimize the rate of formation of erythrosine. Q7. Determine the limiting reagent in the synthesis of erythrosine. Q8. Show that the mass of erythrosine in the H₂Ery form obtained experimentally is about 4,6 g. Q9. Determine the number of 10 mL bottles of dental plaque disclosing agent, with pH equal to 7 and concentration equal to $2,2×10^{-2}$ mol·L⁻¹ in dye E127, that can be manufactured thanks to this synthesis. 3. Kinetic monitoring of the decolorization of a solution of dye E127 by bleach The Büchner funnel used during the previous synthesis is colored by residues of red dye E127. To decolorize it, bleach can be used. A photograph shows a white Büchner funnel placed on a vacuum flask. Indeed, the Ery²⁻ form of erythrosine reacts with hypochlorite ions ClO⁻ contained in bleach to form a colorless product. This reaction is assumed to be complete. At 25 °C, the two experiments A and B described below are carried out: - in 50 mL beakers, two solutions are prepared from a commercial bleach solution with hypochlorite ion concentration equal to 0,73 mol·L⁻¹: table. Solution S_A: volume of bleach 5 mL, volume of distilled water 5 mL. Solution S_B: volume of bleach 10 mL, volume of distilled water 0 mL. - for experiment A: at time $t=0$ s, 10,0 mL of an aqueous solution of dye E127 with amount concentration equal to $1,7×10^{-5}$ mol·L⁻¹ is poured into the beaker containing solution S_A; the reaction mixture is rapidly filled into a spectrophotometer cuvette, introduced into a spectrophotometer set to an appropriate wavelength, and absorbance values are recorded as a function of time; - for experiment B, the same operations are repeated with solution S_B. In each of the reaction mixtures prepared, erythrosine is present only in the Ery²⁻ form and this form is the only species that absorbs at the chosen wavelength. The results obtained make it possible to plot the curve showing the evolution of the amount concentration of the Ery²⁻ form of erythrosine for experiments A and B (Figure 2). Figure 2. Evolution of the amount concentration of the Ery²⁻ form of erythrosine for experiments A and B. Graph of $[Ery^{2-}]$ in µmol·L⁻¹ from 0 to 10 as a function of time $t$ in s from 0 to 800. Experiment A is represented by + crosses: the concentration is about 8,5 µmol·L⁻¹ at $t=0$, 6,3 at 50 s, 4,5 at 120 s, 3,2 at 200 s, 2,2 at 300 s, 1,3 at 400 s, 0,6 at 520 s, 0,25 at 650 s and tends toward 0 around 780 s. Experiment B is represented by × crosses: the concentration is about 8,5 µmol·L⁻¹ at $t=0$, 5,2 at 50 s, 2,7 at 100 s, 1,2 at 180 s, 0,45 at 250 s, 0,1 around 330 s and becomes almost zero around 400 s. Q10. Describe qualitatively, using Figure 2, the evolution of the volumetric rate of disappearance of the Ery²⁻ form of erythrosine over time for experiment A. Propose a kinetic factor responsible for this evolution. Q11. Determine graphically the half-reaction time for experiment A. Comment. Q12. Explain how it is possible to optimize the decolorization of the Büchner funnel.
⏳ Solution not generated yet

Open this statement in Expert Maths AI: the step-by-step solution is computed on demand, checked by a second resolution, then published here for everyone.

📝 See the solution

Have a similar exercise? Get it solved step by step, for free.

🧮 Solve my exercise