Baccalauréat 2022 — Physics-Chemistry specialty, Polynésie française — exercise 1 : Synthesis of an ester with a floral odor (official exam paper)
Statement
Methyl benzoate, with formula $\mathrm{C_6H_5COOCH_3}$, is used in perfumery; it indeed has a pleasant guava odor.
The aim of this exercise is to determine the yield of the laboratory synthesis of methyl benzoate by extracting the ester obtained and by titrating the remaining benzoic acid.
1. Study of the synthesis reaction of methyl benzoate.
The ester is synthesized from benzoic acid and methanol. The reaction equation modelling this chemical transformation is given below.
Figure 1. Reaction equation modelling the chemical transformation: benzoic acid + methanol ⇄ methyl benzoate + D. Benzoic acid is represented by a benzene ring bearing the $-\mathrm{C(=O)OH}$ group; this group is circled. Methanol is represented by $\mathrm{H_3C-OH}$. Methyl benzoate is represented by a benzene ring bearing the ester group $-\mathrm{C(=O)OCH_3}$.
1.1. Name the functional group circled on the benzoic acid molecule.
1.2. Verify that molecule D corresponds to water.
2. Study of the experimental procedure.
The steps of the ester synthesis protocol are as follows:
Step 1. In a round-bottom flask, introduce 12.2 g of benzoic acid, 4.0 mL of methanol, 3 drops of concentrated sulfuric acid and a few grains of boiling chips. Heat under reflux in a fume hood for 1 hour under gentle boiling.
Step 2. After cooling, pour the contents of the flask into a separatory funnel containing about 50 mL of a saturated sodium chloride solution (saturated salt water). Shake, venting regularly, and separate the aqueous phase from the organic phase.
Step 3. Then add 50 mL of an aqueous sodium hydrogencarbonate solution $\left(\mathrm{Na^+(aq) + HCO_3^-(aq)}\right)$ to the organic phase. Vent, then separate the two phases after decantation.
Step 4. Dry the organic phase with anhydrous magnesium chloride, then filter, collecting the filtrate in a clean, dry Erlenmeyer flask.
2.1. State the role of the sulfuric acid added in step 1 of the synthesis protocol.
2.2. Identify, among the setups shown in Figure 2, the one corresponding to step 1 of the synthesis protocol.
Figure 2. Synthesis setups: Setup A: an Erlenmeyer flask or heated flask, topped with a long vertical open tube, with heating. Setup B: heated flask topped with a vertical water condenser, reflux setup. Setup C: heated flask connected to a vertical column then to an inclined condenser leading to a collecting vessel, distillation setup.
2.3. Give one advantage of heating under reflux.
Data:
Data table:
- Chemical species: benzoic acid, methanol, methyl benzoate, saturated salt water.
- Molecular formula: benzoic acid $\mathrm{C_7H_6O_2}$; methanol $\mathrm{CH_4O}$; methyl benzoate $\mathrm{C_8H_8O_2}$.
- Density $(\mathrm{g\cdot mL^{-1}})$: methanol 0.79; methyl benzoate 1.1; saturated salt water 1.2.
- Solubility in water: benzoic acid very low; methanol very high; methyl benzoate very low.
- Solubility in salt water: benzoic acid very low; methanol very high; methyl benzoate insoluble.
- Safety pictograms: benzoic acid corrosive and CMR*; methanol flammable, toxic and CMR*.
CMR*: carcinogenic, mutagenic and neurotoxic.
2.4. By studying the safety pictograms of the reactants, justify the operating precautions taken and state the usual safety precautions.
2.5. Explain the choice of adding salt water in step 2 of the synthesis protocol.
2.6. Identify the chemical species contained in each of the two phases mentioned in step 2 of the synthesis protocol.
Data:
- Carbonic acid / hydrogencarbonate ion pair: $\mathrm{CO_2,H_2O(aq) / HCO_3^-(aq)}$ and associated half-equation: $\mathrm{CO_2,H_2O(aq) = HCO_3^-(aq) + H^+}$.
The $pK_A$ value of the carbonic acid / hydrogencarbonate ion pair is equal to 6.4.
- Benzoic acid / benzoate ion pair: $\mathrm{C_6H_5COOH / C_6H_5COO^-}$.
The $pK_A$ value of the benzoic acid / benzoate ion pair is equal to 4.2.
2.7. Show, by writing an equation, that adding the aqueous sodium hydrogencarbonate solution $\left(\mathrm{Na^+(aq) + HCO_3^-(aq)}\right)$ in step 3 of the synthesis protocol makes it possible to convert the remaining benzoic acid $\mathrm{C_6H_5COOH(s)}$ into benzoate ion $\mathrm{C_6H_5COO^-(aq)}$.
3. Identification of the molecule obtained by infrared spectroscopy.
After step 4 of the synthesis protocol, the infrared spectrum in the liquid phase of the synthesized molecule was recorded.
Figure 3. Infrared spectrum of the synthesized molecule: graph of transmittance $T$ in percent as a function of wavenumber $\sigma$ in $\mathrm{cm^{-1}}$, from 4000 to 500 $\mathrm{cm^{-1}}$. The transmittance is close to 90 to 100% over a large part of the spectrum. Narrow absorption bands are observed notably near 3000 $\mathrm{cm^{-1}}$, a very intense and narrow band around 1700 $\mathrm{cm^{-1}}$ dropping almost to 0%, several intense bands between about 1500 and 1000 $\mathrm{cm^{-1}}$, and other intense bands near 700–800 $\mathrm{cm^{-1}}$. There is no marked broad band between 2500 and 3400 $\mathrm{cm^{-1}}$.
Data: Infrared (IR) spectroscopy data table:
- Bond O–H bonded: wavenumber 3200–3400 $\mathrm{cm^{-1}}$; band width: broad; absorption intensity: strong.
- Carboxylic acid O–H bond: wavenumber 2500–3200 $\mathrm{cm^{-1}}$; band width: broad; absorption intensity: strong to medium.
- C–H bond: wavenumber 2800–3000 $\mathrm{cm^{-1}}$; band width: narrow, multiple bands; absorption intensity: weak.
- C=O bond: wavenumber 1650–1740 $\mathrm{cm^{-1}}$; band width: narrow; absorption intensity: strong.
- C–O bond: wavenumber 1000–1300 $\mathrm{cm^{-1}}$; band width: narrow; absorption intensity: strong.
3.1. Using the data, show that the spectrum in Figure 3 can correspond to the chemical formula of methyl benzoate.
4. Yield of the synthesis.
The reaction equation modelling the chemical transformation of methyl benzoate synthesis is as follows: $\mathrm{C_7H_6O_2(\ell) + CH_4O(\ell) \rightleftharpoons C_8H_8O_2(\ell) + H_2O(\ell)}$.
Data:
Table:
- Chemical species: benzoic acid, methanol, methyl benzoate, saturated salt water.
- Molecular formula: benzoic acid $\mathrm{C_7H_6O_2}$; methanol $\mathrm{CH_4O}$; methyl benzoate $\mathrm{C_8H_8O_2}$.
- Molar mass $(\mathrm{g\cdot mol^{-1}})$: benzoic acid 122; methanol 32.0; methyl benzoate 136.
4.1. Using the data given in step 1 of the synthesis protocol and those above, determine the amounts of substance of the reactants $n_{i,alcool}$ and $n_{i,acide}$ initially mixed.
4.2. Deduce that these reactants were introduced in stoichiometric proportions.
The experimental mass $m_{exp}$ of methyl benzoate obtained is equal to 9.11 g.
4.3. Copy onto your answer sheet and complete the advancement table below:
Reaction equation: $\mathrm{C_7H_6O_2(\ell) + CH_4O(\ell) \rightleftharpoons C_8H_8O_2(\ell) + H_2O(\ell)}$.
Table: columns “State”, “Advancement (in mol)” and “Amounts of substance (in mol)” for the four species. Initial state: $x=0$, amounts $n_{i,acide}$, $n_{i,alcool}$, 0, 0. Intermediate state: advancement $x$, amounts to be completed. Final state: advancement $x_f$, amounts to be completed.
4.4. Determine the values of the amounts of substance of all species present in the final state, denoted $n_{acide,eq}$, $n_{alcool,eq}$, $n_{eau,eq}$ and $n_{ester,eq}$, corresponding to chemical equilibrium.
4.5. Show that the yield $r$ of the synthesis is close to 67%.
4.6. Propose a method to improve the yield of this synthesis.
5. Checking the amount of benzoate ions remaining using spectrophotometric analysis.
At the end of the synthesis, adding the sodium hydrogencarbonate solution made it possible to convert the unreacted benzoic acid $\mathrm{C_6H_5COOH(aq)}$, denoted AH(aq), into benzoate ions $\mathrm{C_6H_5COO^-(aq)}$, denoted $\mathrm{A^-(aq)}$.
The aim is to determine the remaining amount of benzoate ions, denoted $n(A^-)$, in the aqueous phase of total volume equal to 100 mL by carrying out a spectrophotometric determination.
Figure 4. Absorption spectrum of benzoate ions in aqueous solution: graph of absorbance $A$ as a function of wavelength $\lambda$ in nm, from 245 to 295 nm. Approximate read values: at 250 nm, $A=0.30$; 255 nm, $A=0.30$; 260 nm, $A=0.30$; 265 nm, $A=0.35$; 270 nm, $A=0.37$ maximum; 272 nm, $A=0.35$; 275 nm, $A=0.25$; 280 nm, $A=0.15$; 290 nm, $A=0$.
5.1. Using the graph in Figure 4, explain at which wavelength $\lambda$ the spectrophotometer should be set for future measurements.
5.2. Identify the spectral range in which absorbance is maximal.
The aqueous solution obtained after synthesis is diluted 100 times. After dilution, the new solution is called solution S.
From a sodium benzoate stock solution $\mathrm{S_0}$ of concentration $c_0 = 1.0\times10^{-2}\ \mathrm{mol\cdot L^{-1}}$, a calibration set is prepared consisting of 4 diluted solutions $\mathrm{S_1}$, $\mathrm{S_2}$, $\mathrm{S_3}$ and $\mathrm{S_4}$ poured into identical quartz cuvettes.
The results are compiled in the table in Figure 5.
Figure 5. Table of spectrophotometric determination results:
- Solution $S_i$: $S_0$, $S_1$, $S_2$, $S_3$, $S_4$.
- Concentration $c_i$ $(\mathrm{mol\cdot L^{-1}})$: $1.0\times10^{-2}$; $7.5\times10^{-3}$; $5.0\times10^{-3}$; $2.5\times10^{-3}$; $1.0\times10^{-3}$.
- Absorbance $A$: 0.880; 0.661; 0.441; 0.221; 0.087.
The glassware available in the laboratory is as follows:
- Beakers of 50 mL, 25 mL, 100 mL.
- Volumetric pipettes of 10.0 mL, 20.0 mL, 25.0 mL.
- Volumetric flasks of 50.0 mL, 100.0 mL.
5.3. Among the available glassware, determine those that make it possible to prepare a volume $V$ equal to 100.0 mL of solution $S_3$ by dilution from the stock solution $S_0$.
The spectrophotometric measurements are shown in Figure 6. The absorbance of solution S is also measured: $A_S = 0.29$.
Figure 6. Variation of absorbance as a function of benzoate ion concentration: plot of the calibration line “Absorbance as a function of benzoate ion concentration”. Horizontal axis: $c$ in $\mathrm{mol\cdot L^{-1}}$, from 0.000 to 0.011. Vertical axis: $A$, from 0.0 to 1.0. The experimental points are aligned on a straight line passing through the origin. Linear model given: $A = 88.1\times C$.
In the following question, the candidate is invited to take initiative and present the approach followed, even if it did not lead to a result. The approach is assessed and must be properly presented.
5.4. Show that the amount of remaining benzoate ions $n(A^-)$ in the aqueous phase resulting from the esterification reaction is equal to $3.3\times10^{-2}$ mol, which is also the amount of remaining benzoic acid $n_{acide,eq}$ determined in question 4.4.
⏳ Solution not generated yet
Open this statement in Expert Maths AI: the step-by-step solution is computed on demand, checked by a second resolution, then published here for everyone.
📝 See the solutionHave a similar exercise? Get it solved step by step, for free.
🧮 Solve my exercise