Baccalauréat 2022 — Physics-Chemistry specialty, Polynésie française — exercise 3 : Solar eclipse of 10 June 2021 (official exam paper)
Statement
Keywords: optical model, astronomical telescope, magnification, apparent diameter.
Scientists have developed various optical instruments such as the astronomical telescope.
In this exercise, we will study how a commercial astronomical telescope works, used during the observation of the solar eclipse of 10 June 2021, with the observation of the phenomenon being carried out with protective glasses so as not to damage vision.
The objectives of this exercise are to determine the magnification of the astronomical telescope used by an amateur during the observation of the solar eclipse of 10 June 2021 and to determine the approximate diameter of the Moon.
Figure 1. The astronomical telescope: diagram of an afocal astronomical telescope tube made up of a main tube containing, at each end, a converging lens. Lens $L_1$ is at the entrance of the telescope, on the side of the observed object; lens $L_2$ is at the exit, on the eye side. Parallel light rays enter the telescope, pass through $L_1$, converge at a point $P$ where the rays cross, then pass through $L_2$ and emerge toward the eye. The diagram also shows the diameter of the objective and the focal length. Text accompanying the figure: “The astronomical telescope is an afocal instrument made up of a main tube containing, at each end, a converging lens. The principle of this instrument is to collect the light emitted by celestial bodies, concentrate it, and send the eye an enlarged image of the observed object.”
The astronomical telescope.
Figure 1 presents the Galileo telescope in a simple way.
1. Match lenses $L_1$ and $L_2$ with the terms objective lens and eyepiece.
2. For lens $L_1$, give the scientific name of point P where the rays cross.
Data:
- The solar eclipse of 10 June 2021: a solar eclipse consists of the alignment of the centers of the Sun, the Moon, and the Earth. On 10 June 2021, the Moon came between the Sun and the Earth as shown in the figure opposite.
Diagram of the solar eclipse: the Sun is on the left, the Moon is between the Sun and the Earth, the Earth on the right. Rays outline a cone of shadow behind the Moon, directed toward the Earth, as well as a cone of penumbra. The zones on the Earth are labeled “total eclipse” in the shadow cone and “partial eclipse” in the penumbra cone.
- Information notice for the astronomical telescope used during the observation: “The computerized telescope used is the ideal companion for your first observations: the lunar surface, Venus and its phases, Mars, Jupiter and its 4 moons, Saturn with its rings clearly visible and much more thanks to its database integrated into the hand controller for more than 4,000 objects. It can also be used as a spotting scope.”
Technical data:
- Designation: used telescope.
- Optical construction: lenses.
- Objective diameter: 102 mm.
- Objective focal length: 66 cm.
- Eyepiece focal length: 9,0 mm.
- Maximum magnification: 73×.
- Reference: ACEC298.
The answer sheet to be submitted with the paper shows the observation of the Moon with the commercial astronomical telescope used during the eclipse of 10 June 2021. This document is shown not to scale. The Moon, located at infinity, is represented by the object $A_\infty B_\infty$.
3. The commercial telescope used is afocal. On the answer sheet to be submitted with the paper, position the principal object focus $F_2$ and the principal image focus $F’_2$ of lens $L_2$, not to scale.
4. Indicate how the light ray coming from $B_\infty$ and passing through the optical center $O_1$ traverses lens $L_1$.
5. On the answer sheet to be submitted with the paper, draw the light ray coming from $B_\infty$ and passing through the optical center $O_1$ of lens $L_1$ in order to obtain the intermediate image $A_1B_1$.
6. Give the two characteristics of the image $A_1B_1$ obtained.
7. On the answer sheet to be submitted with the paper, draw the light ray coming from $B_1$ and passing through the optical center $O_2$ of lens $L_2$. The final image $A_2B_2$ of the Moon is then obtained.
8. On the answer sheet to be submitted with the paper, represent the beam of light rays coming from the object $B_\infty$ passing through the edges of lens $L_1$ and then lens $L_2$.
Magnification of the astronomical telescope.
The Moon represented by the object $A_\infty B_\infty$ is seen with the naked eye under the angle $\theta$, called the apparent diameter of the Moon.
9. On the answer sheet to be submitted with the paper, position the angle $\theta’$ under which the final image of the Moon is observed through the telescope used.
⏳ Solution not generated yet
Open this statement in Expert Maths AI: the step-by-step solution is computed on demand, checked by a second resolution, then published here for everyone.
📝 See the solutionHave a similar exercise? Get it solved step by step, for free.
🧮 Solve my exercise