Baccalauréat 2023 — Physics-Chemistry specialty, Centres étrangers - Groupe 1 — exercise 3 : Ceramic kiln (official exam paper)
Statement
To obtain ceramic objects, they must be placed inside a suitable kiln. The objects are introduced into the kiln at room temperature, heated gradually until they reach 1000 °C (phase 1) and kept at this temperature for a precise duration in order to obtain a successful ceramic piece (phase 2).
The aim of this exercise is to evaluate the gas consumption of a kiln during the two phases of firing.
DOCUMENT 1 - The kiln
Once lit, a propane burner is placed in front of the opening at the bottom of the kiln. The flames burst inside beneath a protective plate on which the pieces to be fired are placed.
The inside of the kiln is made of refractory bricks, which have a high thermal resistance.
At the top of the kiln, a chimney allows air and vapours to be evacuated.
Diagram of the kiln: open kiln with door, interior made of refractory bricks, burner flame entry at the bottom on the side, protective plate inside at the bottom of the kiln, vapour exhaust chimney at the top.
Kiln characteristics
• Specific heat capacity: $c_f=800\ \mathrm{J\cdot K^{-1}\cdot kg^{-1}}$.
• Mass of the kiln: $m_f=120\ \mathrm{kg}$.
• Thermal resistance of the kiln: $R_{th}=0,6\ \mathrm{K\cdot W^{-1}}=0,6\ \mathrm{°C\cdot W^{-1}}$.
DOCUMENT 2 - Propane bottle
For firing, propane is used, a combustible gas, whose characteristics are as follows:
• Molar mass of propane: $M=44,1\ \mathrm{g\cdot mol^{-1}}$.
• Molar energy released during the combustion of propane: $E_m=2004\ \mathrm{kJ\cdot mol^{-1}}$.
Reminders
• $T(K)=\theta(°C)+273,15$.
• The variation in internal energy $\Delta U$ of an incompressible system of mass $m$ and specific heat capacity $c$, whose temperature changes from $\theta_i$ to $\theta_f$, is given by the relation: $\Delta U=m\times c\times(\theta_f-\theta_i)$.
Data
• The mass gas flow rate at the bottle outlet, $D$, in $\mathrm{g\cdot h^{-1}}$, is the mass of gas, in grams, supplied by the bottle during 1 h.
• Thermal resistance is related to the heat flux by the relation: $\Phi=\dfrac{(\theta_{four}-\theta_{ext})}{R_{th}}$, with the flux $\Phi$ in watt and the temperature difference $(\theta_{four}-\theta_{ext})$ between the kiln and the outside air, in K or in °C.
Part A - Duration of heating the kiln
We want to determine the amount of gas burned in the kiln to raise its temperature from $\theta_i=20\ °C$ to $\theta_f=1000\ °C$.
1. Calculate the variation in internal energy $\Delta U$ of the system {kiln} when its temperature changes from $\theta_i$ to $\theta_f$.
2. Apply the first law of thermodynamics to the system {kiln} and deduce the value of the amount of energy $Q$ received by the system by thermal transfer.
During the heating phase, the combustion of the gas releases an amount of heat $Q_A$ greater than $Q$ because 33 % of the amount $Q_A$ is lost during heating.
3. Show that the amount of thermal energy $Q_A$ that the gas combustion must supply has the value $Q_A=1,4\times10^8\ \mathrm{J}$.
4. Deduce from the previous questions the value of the mass $m_g$ of gas needed to reach the temperature $\theta_f$.
5. Assuming that, for this phase, the gas flow rate at the bottle outlet is constant and equal to $D=1250\ \mathrm{g\cdot h^{-1}}$, determine the duration $\Delta t_A$ required for the kiln temperature to reach the desired value.
Part B - Maintaining the temperature
Once the temperature of 1000 °C has been reached, the combustion of propane is maintained so that the kiln remains at this temperature $\theta_{four}=1000\ °C$ during the duration $\Delta t_B=20\ \mathrm{min}$. The place where the kiln is located (outside environment) remains permanently at the temperature $\theta_{ext}=20\ °C$.
We denote by $Q_B$ the amount of heat received by the system {kiln}, due to the combustion of propane during the duration $\Delta t_B$, to compensate for thermal losses to the outside environment.
6. State the three possible modes of thermal transfer from the kiln to the outside environment.
The kiln manufacturer indicates a thermal resistance of $R_{th}=0,60\ \mathrm{K\cdot W^{-1}}$.
7. Calculate the value of the heat flux $\Phi$ between the system {kiln} and the outside environment when the kiln is maintained at $\theta_{four}=1000\ °C$.
The kiln is maintained at this temperature during the duration $\Delta t_B=20\ \mathrm{min}$.
8. Show that the value of the energy $Q_B$ required to keep the kiln temperature constant during this duration is close to 2,0 MJ.
9. Deduce the value of the minimum gas mass $m_{min}$ that must be consumed during this phase of maintaining the kiln temperature at $\theta_{four}=1000\ °C$.
Part C – Comparison of the energies
10. Compare the value of the energy $Q_A$ needed for heating up with that of the energy $Q_B$ needed to keep the kiln at temperature. Draw a practical conclusion in everyday life when one has several different firings to carry out.
⏳ Solution not generated yet
Open this statement in Expert Maths AI: the step-by-step solution is computed on demand, checked by a second resolution, then published here for everyone.
📝 See the solutionHave a similar exercise? Get it solved step by step, for free.
🧮 Solve my exercise