Solved exercises🧮 Solve my exercise

Baccalauréat 2023 — Physics-Chemistry specialty, Nouvelle-Calédonie (jour 1) — exercise 1 : A biodegradable polymer, PLA (official exam paper)

PhysicsLevel : High schoolA biodegradable polymer, PLA🌐 Lire en français
Statement
Data: Molar mass of lactic acid: $M = 90,1\ \mathrm{g\cdot mol^{-1}}$. Uncertainty calculations: - Under the experimental conditions, the standard uncertainties on the concentration of sodium hydroxide solution $(S_2)$ and on the value of $V_{eq}$ are as follows: $u(C_2)=0,02\times 10^{-1}\ \mathrm{mol\cdot L^{-1}}$ ; $u(V_{eq})=0,25\ \mathrm{mL}$. - Standard uncertainties of some glassware items, at 20 °C: volumetric pipette: $10,00\pm0,02\ \mathrm{mL}$, $20,00\pm0,03\ \mathrm{mL}$, $25,00\pm0,05\ \mathrm{mL}$ ; graduated burette: $25,00\pm0,05\ \mathrm{mL}$, $50,00\pm0,10\ \mathrm{mL}$ ; volumetric flask: $100,0\pm0,1\ \mathrm{mL}$, $200,0\pm0,2\ \mathrm{mL}$. - The standard uncertainty on the concentration of lactic acid solution $(S_0)$ can be obtained using the following relation: $u(C_0)=C_0\times\sqrt{\left(\frac{u(C_2)}{C_2}\right)^2+\left(\frac{u(V_{eq})}{V_{eq}}\right)^2+\left(\frac{u(V_1)}{V_1}\right)^2}$. - To check compatibility between an experimental value $C_0$ and a reference value $C_{0,réf}$, one calculates the ratio, called normalized deviation: $z=\frac{|C_0-C_{0,réf}|}{u(C_0)}$. If $z\leq 2$, the experimental value and the reference value are considered compatible. Colored indicators: bromophenol blue, transition range 3,0–4,6, color change yellow - blue; methyl orange, transition range 3,1–4,4, red - yellow; bromocresol green, transition range 3,8–5,4, yellow - blue; cresol red, transition range 7,2–8,8, yellow - red; malachite green, transition range 11,5–13,2, green - colorless. Table of wavenumbers associated with infrared spectral bands: $-\mathrm{C-H}$ bond: 2480–3000 $\mathrm{cm^{-1}}$ ; free alcohol $\mathrm{O-H}$ bond: 3580–3650 $\mathrm{cm^{-1}}$, sharp ; hydrogen-bonded alcohol $\mathrm{O-H}$ bond: 3200–3550 $\mathrm{cm^{-1}}$, broad ; ether $\mathrm{C-O}$ bond: 1000–1250 $\mathrm{cm^{-1}}$ ; alcohol: 970–1260 $\mathrm{cm^{-1}}$ ; epoxide: 1200–1250 $\mathrm{cm^{-1}}$ ; ester: 1050–1330 $\mathrm{cm^{-1}}$ ; $\mathrm{C=O}$ bond ketone: 1715 $\mathrm{cm^{-1}}$, intense ; aldehyde: 1720–1740 $\mathrm{cm^{-1}}$ ; carboxylic acid: 1760 $\mathrm{cm^{-1}}$ ; ester: 1735–1750 $\mathrm{cm^{-1}}$. Part A - Titration of a lactic acid solution Lactic acid is a biosourced molecule produced at more than 270 000 tonnes per year. It has a wide range of applications, notably in the food industry, cosmetics, the pharmaceutical industry and packaging. The displayed structural formula of lactic acid is given below (Figure 1). Figure 1: displayed structural formula of lactic acid, corresponding to $\mathrm{CH_3-CH(OH)-COOH}$ : an alcohol function on the central carbon and a carboxylic acid function at the end of the chain. A.1. Draw the skeletal formula of lactic acid, then circle the characteristic groups. Name the functional families of this molecule. Industrially, lactic acid is mainly produced by bacterial fermentation. At the end of this step, a lactic acid concentration between $53\ \mathrm{g\cdot L^{-1}}$ and $85\ \mathrm{g\cdot L^{-1}}$ is obtained. In this part, the goal is to verify by titration the lactic acid concentration in a cosmetic lotion, noted $(S_0)$, whose declared reference concentration is $C_{0,réf}=65\ \mathrm{g\cdot L^{-1}}$. Lactic acid will be denoted $\mathrm{AH}$ and its conjugate base $\mathrm{A^-}$. A solution $(S_1)$ is prepared by diluting the solution $(S_0)$ by a factor of ten. Titration procedure: - Using a volumetric pipette, take $V_1=20,00\ \mathrm{mL}$ of solution $(S_1)$, pour it into a 100 mL beaker and introduce a magnetic stir bar. - Place the beaker on a magnetic stirring device. - Fill a 25,00 mL graduated burette with an aqueous sodium hydroxide solution $(S_2)$ $(\mathrm{Na^+(aq)+OH^-(aq)})$ of concentration $C_2=1,00\times10^{-1}\ \mathrm{mol\cdot L^{-1}}$. - Calibrate the $pH$ meter and immerse the probe in the solution to be titrated. - Carry out the titration of solution $(S_1)$ contained in the Erlenmeyer flask by the solution $(S_2)$ contained in the graduated burette while following the evolution of the $pH$. A.2. Draw and label the experimental setup used to perform the titration. A.3. Write the equation of the reaction underlying the titration. The measurements of the $pH$ of solution $(S_1)$ as a function of the volume of titrant solution $(S_2)$ added lead to the curve in APPENDIX I TO BE SUBMITTED WITH THE ANSWER SHEET (page 12/13). A.4.1. Using the curve shown in APPENDIX I TO BE SUBMITTED WITH THE ANSWER SHEET (page 12/13), determine, with justification, the volume $V_{eq}$ of titrant solution $(S_2)$ added at equivalence. A.4.2. Deduce the amount-of-substance concentration $C_0$ of lactic acid in solution $(S_0)$. A.4.3. Calculate the standard uncertainty $u(C_0)$ associated with the measurement of the lactic acid concentration in solution $(S_0)$. A.4.4. Compare the measured concentration $C_0$ with the reference value by calculating the normalized deviation $z$. Conclude. A.5. Propose, with justification, the name of a colored indicator that can be used to detect the equivalence point in the titration of lactic acid. Part B - Degradation of PLA Polylactic acid (PLA) used in packaging is a biodegradable and biosourced polymer whose chemical formula is given below (Figure 2). Figure 2: formula of polylactic acid (PLA), chain made up of ester units derived from lactic acid, of the type $\mathrm{HO-CH(CH_3)-C(=O)-O-[CH(CH_3)-C(=O)-O]_n-CH(CH_3)-COOH}$ ; three empty boxes appear near $\mathrm{CH_3}$ groups in the structure. Infrared spectroscopy is an analytical method frequently used to study polymers in order to determine, for example, the presence of impurities. Figure 3: infrared spectra of lactic acid and PLA. Spectrum A: wavenumber axis from 4000 to 650 $\mathrm{cm^{-1}}$, transmittance percentage on the y-axis; intense and sharp band near 1750 $\mathrm{cm^{-1}}$, numerous bands between 1300 and 1000 $\mathrm{cm^{-1}}$, absence of a very marked broad band between 3200 and 3550 $\mathrm{cm^{-1}}$. Spectrum B: wavenumber axis from 4000 to 500 $\mathrm{cm^{-1}}$ ; broad absorption in the 3200–3550 $\mathrm{cm^{-1}}$ region, intense band near 1700–1750 $\mathrm{cm^{-1}}$, multiple bands near 1500–1000 $\mathrm{cm^{-1}}$. B.1. Assign each of the two infrared spectra A and B (figure 3) to a chemical species (lactic acid and PLA). Justify the answer. Polylactic acid (PLA) degrades in the presence of water releasing lactic acid according to the transformation modeled by the reaction equation: $\mathrm{A+H_2O\rightarrow B+acide\ lactique}$, with: A (PLA), chain segment containing three lactate units and one carboxylic acid end group ; B, shortened chain containing two lactate units and one carboxylic acid end group. The kinetics of the transformation were studied in order to assess the influence of temperature (figure 4). Degradation was carried out at three different temperatures with a mass fraction of PLA initially present relative to water of 10 %. Figure 4: monitoring of the mass concentration of PLA during the reaction. The ordinate is $\frac{c_{PLA}}{c_{PLA,0}}$ from 0 to 1,2 ; the abscissa is time in minutes from 0 to 350. Three curves for 10 % PLA: at 180 °C, approximate points $(0;1)$, $(25;0,70)$, $(50;0,20)$, $(70;0,05)$, $(90;0)$, $(100;0)$ ; at 160 °C, approximate points $(0;1)$, $(25;1,0)$, $(50;0,90)$, $(70;0,45)$, $(90;0,25)$, $(100;0,15)$, $(150;0)$, $(200;0)$, $(250;0)$ ; at 140 °C, approximate points $(0;1)$, $(25;1,0)$, $(50;0,98)$, $(70;0,97)$, $(90;0,96)$, $(100;0,95)$, $(150;0,75)$, $(200;0,20)$, $(250;0,05)$, $(300;0)$. Source: after Kinetics of Hydrolytic Degradation of PLA, J. Polym. Environ., 2013. The ratio $\frac{c_{PLA}}{c_{PLA,0}}$ corresponds to the ratio between the mass concentration of PLA at time $t$ and the initial mass concentration. B.2.1. Identify, from experimental data, one or more kinetic factors. B.2.2. The rate of this transformation increases in acidic medium. Deduce the role played by the oxonium ion. B.3.1. Estimate the half-reaction time $t_{1/2}$ of this transformation for temperature $\theta=160\ ^\circ\mathrm{C}$. B.3.2. Indicate qualitatively how the half-reaction time changes for $\theta_1=140\ ^\circ\mathrm{C}$ and for $\theta_2=180\ ^\circ\mathrm{C}$. Appendix I to be submitted with the answer sheet: evolution of the $pH$ of solution $(S_1)$ as a function of the volume of titrant solution $(S_2)$ added. Graph with volume added from 0 to 25 mL, $pH$ from 0 to 14. The curve starts near $pH\approx2,5$ for $V=0\ \mathrm{mL}$, increases slowly to $pH\approx4,2$ around $V=10\ \mathrm{mL}$, shows a significant jump around $V\approx14\ \mathrm{mL}$, then reaches a basic plateau near $pH\approx12$ for $V$ greater than about 16 mL.
⏳ Solution not generated yet

Open this statement in Expert Maths AI: the step-by-step solution is computed on demand, checked by a second resolution, then published here for everyone.

📝 See the solution

Have a similar exercise? Get it solved step by step, for free.

🧮 Solve my exercise