Solved exercises🧮 Solve my exercise

Baccalauréat 2023 — Physics-Chemistry specialty, Amérique du Nord (jour 2) — exercise 1 : Bicycle Moto Cross (official exam paper)

PhysicsLevel : High schoolBicycle Moto Cross🌐 Lire en français
Statement
BMX (Bicycle Moto Cross) is a cycling discipline that originated in the USA and was brought to France in the 1980s. The « Race », an Olympic sport since 2008, is a race held on a bumpy track with a length between 270 and 400 m. Eight riders start from an elevated starting hill and must complete the lap as quickly as possible by overcoming several types of obstacles. Figure: captioned photograph « Start of the Tokyo Olympic final (2020) » showing BMX riders lined up on a starting gate. A. The signals associated with the start of the race Once the riders are correctly positioned on the gate at the top of the hill, the starter triggers the automatic starting command, which consists of a series of 4 sound beeps synchronized with lights (red, 1st orange, 2nd orange, green). At the fourth beep, which coincides with the green light, the gate drops to release the riders. During this procedure, the specifications of the international cycling union require that the sound intensity level be initially set so that, despite the acoustic attenuation generated by their helmets, the riders can all hear the sound beeps perfectly. A sound is considered perfectly audible by the rider from a sound intensity level of about 60 dB, without exceeding 85 dB. Data: - speed of sound in air at 20 °C: $c_{son}=340\ \text{m·s}^{-1}$; - speed of a light wave in air: assumed known; - frequency of the sound beeps: $f=632\ \text{Hz}$. The loudspeaker emitting the sound beeps is unique. It is located in line with the starting line at a distance $d=4,0\ \text{m}$ to the left of the closest rider. The farthest rider is then 7,0 m further to the right. Diagram: on a horizontal line representing the top of the starting hill, a rectangle labeled « Loudspeaker » is placed on the left. The distance from the loudspeaker to the position of rider 1 (the closest) is indicated: 4,0 m. The distance between the position of rider 1 and the position of rider 8 (the farthest) is indicated: 7,0 m. Rider 8 is therefore 11,0 m from the loudspeaker. The loudspeaker has been adjusted so that the sound intensity level of the incident sound measured on the helmet shell of the first rider is $L_{i1}=83\ \text{dB}$. Attenuation by absorption corresponds to the difference between the sound intensity level $L_i$ of the sound incident on the helmet and the sound intensity level $L_t$ of the sound transmitted inside it. For the frequency 632 Hz and the carbon-fiber helmets used by top-level riders, this attenuation is of the order of 10 dB. Q.1. Calculate the transmitted sound intensity level $L_{t1}$ inside the helmet of the first rider. The relation between $L$, the sound intensity level at a distance $d$ from the source, and $L’$, the sound level at a distance $d’$ farther from this source, is given by: $L’=L+20\cdot\log\left(\dfrac{d}{d’}\right)$. Q.2. Calculate the sound intensity level $L_{i8}$ of the sound incident on the helmet of the eighth rider, then the corresponding transmitted sound intensity level $L_{t8}$. Comment on this result. Some starting hills are now equipped with two loudspeakers, placed at the ends of the starting line. Q.3. Explain qualitatively why this two-loudspeaker arrangement is fairer. Two rows of lights are installed halfway up the starting hill on either side of the downhill slope. Figure: photograph of the starting hill; two vertical rows of starting lights are mounted on the left and right side walls of the track, halfway up the slope. Arrows point to them with the caption « Starting light rows ». Q.4. Justify without calculation the advantage for the riders of paying more attention to light signals than to sound signals when starting. B. The start When the gate drops, the riders pedal intensely to acquire the greatest possible speed at the bottom of the hill. During a training session, filmed for a sports channel, taking place on a track with a starting hill 8 m high, a rider reaches the speed of $61\ \text{km·h}^{-1}$ at the bottom of the hill in 2,7 s. Diagram « Profile of the hill »: point A is at the top of an inclined plane, at altitude $z_A=8,0\ \text{m}$; point B is at the bottom, at altitude $z_B=0,0\ \text{m}$. On the rider placed on the inclined plane, three vectors are shown: the weight $\vec P$ vertically downward, the reaction $\vec R$ perpendicular to the inclined plane upward, and the driving force $\vec F$ parallel to the inclined plane directed down the slope. During this descent, the system {rider + bicycle}, modeled as a point particle of total mass $m=93\ \text{kg}$, moves from position A to position B, being subject only to three mechanical actions modeled by its weight $\vec P$, the reaction $\vec R$ of the inclined plane always perpendicular to the plane, and the driving force $\vec F$ of assumed constant magnitude and parallel to the plane. The terrestrial frame is here considered Galilean. Data: - gravitational acceleration $g=9,81\ \text{m·s}^{-2}$; - kinetic energy theorem: the change in kinetic energy of a system between two positions A and B is equal to the sum of the work done by the forces applied to this system between the two positions A and B. Q.5. Apply the kinetic energy theorem to the system during the AB path to express the work $W_{AB}(\vec F)$ of the driving force related to the rider’s pedaling. Q.6. Calculate the value of this work. This rider is capable of developing a pedaling power on the order of 2000 to 2500 W during the AB path. Q.7. Show that the value of the work calculated in question Q.6 is consistent with the rider’s pedaling power, assumed constant. C. The jump over the bump The rider now approaches a double bump with the aim of completely clearing the obstacle. Situation diagram: in a frame with origin O, the x-axis is horizontal to the right and the z-axis vertical upward. The two tops of the double bump are at the same height. The first top is near O; the second is located 7,0 m farther horizontally. The initial velocity vector $\vec V_0$ starts from O and is inclined at an angle $\alpha$ above the horizontal. The initial velocity vector of the system $\vec V_0$ is inclined at an angle $\alpha=23°$ relative to the horizontal. The two tops are at the same height and 7,0 m apart. At time $t=0$ of its « flight » the system {rider + bicycle}, modeled as a point particle denoted G, is at O. Its total mass is $m=93\ \text{kg}$, and the magnitude of $\vec V_0$ is measured at $13,6\ \text{m·s}^{-1}$. Air effects on the system {rider + bicycle} are neglected. Q.8. By applying Newton’s second law to the system, show that the time equations of motion during the jump are: $\overrightarrow{OG}\begin{pmatrix}x(t)=(V_0\cdot\cos\alpha)\cdot t\\ z(t)=-\dfrac{1}{2}g\cdot t^2+(V_0\cdot\sin\alpha)\cdot t\end{pmatrix}$ The system regains contact with the ground after 1,0 s. Q.9. Determine whether the jump is successful within the framework of the model used. In reality the system comes into contact with the ground just after the second top, for a horizontal distance traveled of about 8,0 m. Q.10. Show that the model is not suitable for describing the jump and indicate a possible reason. D. A disputed experiment After the race, the so-called cold bath technique is used by BMX riders to promote physical recovery. It consists of immersing the BMX rider in a cold water bath at 10 °C, for a few minutes. In this part, the aim is to determine the body temperature of the rider at the end of the immersion time. To do this, we study the evolution of the temperature $T$ of the system {BMX rider} placed in contact with the cold bath water whose temperature $T_{eau}$ remains constant and equal to 10 °C. Let $Q$ be the thermal energy exchanged between the rider and the water during a duration $\Delta t$. Let $\Phi$ be the corresponding thermal flux. The rider is modeled as an incompressible system with a thermal capacity, $C$, constant. Data: - initial temperature of the rider before immersion: $\theta_0=37\ °\text{C}$; - $T\ (\text{K})=\theta\ (°\text{C})+273$; - thermal capacity of the system {BMX rider}: $C=347\ \text{kJ·K}^{-1}$. Q.11. State three modes of thermal transfer. Q.12. Applying the first law of thermodynamics, relate the change in internal energy $\Delta U$ of the system {BMX rider} to the thermal energy $Q$. Q.13. Express the thermal flux $\Phi$ as a function of $Q$ and $\Delta t$. Indicate the SI units of the quantities involved in this expression. The change in internal energy of an incompressible system at rest whose temperature varies by $\Delta T$ is given by the relation $\Delta U=C\cdot\Delta T$. Q.14. Express the thermal flux $\Phi$ as a function of the thermal capacity $C$, the temperature change $\Delta T$, and the duration $\Delta t$. The value of the average thermal flux exchanged between the system {BMX rider} and the cold water is estimated at $4,6\times10^3\ \text{W}$. Q.15. Using the model, calculate the rider’s temperature after 10 min of immersion in cold water. Q.16. State one reason why this model is not relevant.
⏳ Solution not generated yet

Open this statement in Expert Maths AI: the step-by-step solution is computed on demand, checked by a second resolution, then published here for everyone.

📝 See the solution

Have a similar exercise? Get it solved step by step, for free.

🧮 Solve my exercise