Baccalauréat 2023 — Physics-Chemistry specialty, Amérique du Nord (jour 2) — exercise 3 : Beer production (official exam paper)
Statement
Barley, water, hops and yeast... These four ingredients make it possible to produce thousands of different types of beer.
The diagram below shows, in a simplified way, some of the steps in the beer-making process.
Process diagram: the barley undergoes step 1 “Malting” to give malt; hot water is added; hops are added at step 2 “Brewing”; the liquid obtained, called wort, goes through step 3 “Fermentation” where yeast is added; then come step 4 “Filtration” and step 5 “Packaging”.
The aim of this exercise is to study some of the chemical transformations involved in beer production.
A. Hydrolysis of starch
Crushed barley is the raw material used in beer production. Barley is a source of starch, which is a polymer with formula:
Figure: formula of a starch fragment made up of a chain of glucopyranose rings linked by glycosidic $\text{C}-\text{O}-\text{C}$ bonds. Each unit contains a six-atom ring with one oxygen atom, bearing a $\text{CH}_2\text{OH}$ group and several $\text{OH}$ groups; the rings are repeated along the chain.
After a step called malting, the starch is placed in hot water, which activates temperature-sensitive enzymes. These enzymes are catalysts for a chemical transformation called starch hydrolysis. During this transformation, starch is converted into glucose, with formula $\text{C}_6\text{H}_{12}\text{O}_6$.
Q.1. Using the formula of starch, identify the repeating unit of this polymer.
The ability of enzymes to break down starch is influenced by the concentration of oxonium ions $[\text{H}_3\text{O}^+]$.
The enzyme activity is optimal when $1,3\times10^{-6}\leq[\text{H}_3\text{O}^+]\leq3,2\times10^{-6}\ \text{mol·L}^{-1}$.
During a check, a $pH=5,6$ is measured.
Q.2. Verify that the enzyme activity is optimal.
B. Alcoholic fermentation
During brewing, hops are added to the previously obtained liquid containing sugars, in particular glucose. Hops release chemical species that give beer its bitterness and aroma. The resulting mixture is called “wort”.
At the end of brewing, yeast is added, which causes a transformation called fermentation. This produces ethanol and carbon dioxide from sugars. In particular, glucose is converted into ethanol. This transformation is modeled by the following reaction equation:
$\text{C}_6\text{H}_{12}\text{O}_6(aq)\rightarrow2\ \text{C}_2\text{H}_5\text{OH}(aq)+2\ \text{CO}_2(g)$
Data:
- atomic molar masses in $\text{g·mol}^{-1}$: $M_H=1,0$ ; $M_C=12,0$ ; $M_O=16,0$ ;
- ideal gas constant: $R=8,314\ \text{J·K}^{-1}\text{·mol}^{-1}$ ;
- conversion between temperature scales: $T(\text{K})=\theta(°\text{C})+273$ ;
- atmospheric pressure: $p_{atm}=1,013\times10^5\ \text{Pa}$.
Consider a “wort” with a glucose mass concentration equal to $92,7\ \text{g·L}^{-1}$.
Assume that the fermentation temperature is equal to 20 °C, that the transformation is complete, and that the produced gas behaves as an ideal gas.
Q.3. Determine the maximum volume of gaseous carbon dioxide released at atmospheric pressure during the fermentation of a volume $V=1,0\ \text{L}$ of wort.
The method followed must be clearly explained and the calculations must be shown in detail.
In reality, the volume of gas released is 22 L.
Q.4. Propose a hypothesis that could explain this difference.
C. Flavor of beer
Hops contain many organic chemical species that react with the ethanol produced by fermentation to form a wide variety of odorous chemical species. Among them, ethyl butanoate, with molecular formula $\text{C}_6\text{H}_{12}\text{O}_2$, gives beer a pleasant tropical fruit flavor.
The semi-developed structural formula of ethyl butanoate is as follows: $\text{CH}_3-\text{CH}_2-\text{CH}_2-\text{C}(=\text{O})-\text{O}-\text{CH}_2-\text{CH}_3$.
After isolating a compound present in a beer sample, an analysis laboratory records an infrared spectrum of this compound:
Infrared spectrum: vertical axis “Transmittance (in %)” from 0 to 100; horizontal axis “Wavenumber ($\text{cm}^{-1}$)” from 4000 to 500, marked from left to right in decreasing order. The curve shows in particular strong absorption bands around 2950 $\text{cm}^{-1}$ (C-H bonds), a very strong, sharp band near 1740 $\text{cm}^{-1}$ (ester C=O bond), and several strong bands between about 1300 and 1000 $\text{cm}^{-1}$ (C-O bonds). There is no marked broad O-H band between 3200 and 3700 $\text{cm}^{-1}$ or between 2500 and 3200 $\text{cm}^{-1}$.
Simplified spectroscopic table:
- Free alcohol O-H bond: wavenumber 3500–3700 $\text{cm}^{-1}$ ; strong, sharp intensity.
- Hydrogen-bonded alcohol O-H bond: wavenumber 3200–3400 $\text{cm}^{-1}$ ; strong, broad intensity.
- Carboxylic acid O-H bond: wavenumber 2500–3200 $\text{cm}^{-1}$ ; strong to medium, broad intensity.
- Amine or amide N-H bond: wavenumber 3100–3500 $\text{cm}^{-1}$ ; strong to medium intensity.
- Amine or amide N-H bond: wavenumber 1560–1640 $\text{cm}^{-1}$ ; strong or medium intensity.
- C-H bond: wavenumber 2800–3100 $\text{cm}^{-1}$ ; strong to medium intensity.
- Ester C=O bond: wavenumber 1700–1740 $\text{cm}^{-1}$ ; strong intensity.
- Amide C=O bond: wavenumber 1650–1740 $\text{cm}^{-1}$ ; strong intensity.
- Aldehyde and ketone C=O bond: wavenumber 1650–1730 $\text{cm}^{-1}$ ; strong intensity.
- Carboxylic acid C=O bond: wavenumber 1680–1710 $\text{cm}^{-1}$ ; strong intensity.
- C-O bond: wavenumber 1040–1300 $\text{cm}^{-1}$ ; strong to medium intensity.
Q.5. Verify that the obtained infrared spectrum could correspond to ethyl butanoate.
Q.6. Explain whether this infrared spectrum is sufficient or not to conclude that the isolated compound is ethyl butanoate.
⏳ Solution not generated yet
Open this statement in Expert Maths AI: the step-by-step solution is computed on demand, checked by a second resolution, then published here for everyone.
📝 See the solutionHave a similar exercise? Get it solved step by step, for free.
🧮 Solve my exercise