Baccalauréat 2023 — Physics-Chemistry specialty, Centres étrangers - Groupe 1 (jour 4) — exercise 3 : Preparation of tert-butyl chloride (official exam paper)
Statement
Haloalkanes are very reactive chemical species and are widely used as synthesis reagents. Since haloalkanes occur only in small amounts in nature, the vast majority must be synthesized.
We are interested in the preparation of tert-butyl chloride (or 2-chloro-2-methylpropane) from tert-butanol (or 2-methylpropan-2-ol).
Indeed, tert-butanol reacts with hydrochloric acid to form tert-butyl chloride and water according to the reaction equation:
$\mathrm{(CH_3)_3C{-}OH(\ell) + H_3O^+(aq) + Cl^-(aq) \rightleftharpoons (CH_3)_3C{-}Cl(\ell) + 2H_2O(\ell)}$.
The semi-structural formulas shown represent tert-butanol with a central carbon bonded to three CH₃ groups and to OH, and tert-butyl chloride with a central carbon bonded to three CH₃ groups and to Cl.
Data:
- Data table: tert-butanol: $M = 74{,}0\ \text{g}\cdot\text{mol}^{-1}$; boiling point 83 °C; melting point 26 °C; density $d = 0{,}775$; miscible with water: yes. tert-Butyl chloride: $M = 92{,}5\ \text{g}\cdot\text{mol}^{-1}$; boiling point 52 °C; melting point −25 °C; density $d = 0{,}851$; miscible with water: no.
- concentrated commercial hydrochloric acid HCl(aq): mass percentage $w = 37\ \%$; density at 20 °C: $d = 1{,}19$.
- molar mass of hydrochloric acid: $M = 36{,}5\ \text{g}\cdot\text{mol}^{-1}$;
- density of water at 20 °C: $\rho_{eau} = 1{,}00\times 10^3\ \text{g}\cdot\text{L}^{-1}$;
- acid/base pairs: $\mathrm{CO_2,H_2O(aq)/HCO_3^-(aq)}$; $\mathrm{HCO_3^-(aq)/CO_3^{2-}(aq)}$; $\mathrm{H_3O^+(aq)/H_2O(\ell)}$; $\mathrm{H_2O(\ell)/HO^-(aq)}$;
- excerpt from an infrared spectroscopy table: free alcohol O–H: wavenumber $\sigma = 3500{-}3700\ \text{cm}^{-1}$, strong intensity, sharp; bonded alcohol O–H: $3200{-}3400\ \text{cm}^{-1}$, strong, broad; carboxylic acid O–H: $2500{-}3200\ \text{cm}^{-1}$, strong to medium, broad; alkene C–H: $3000{-}3100\ \text{cm}^{-1}$, medium; alkane C–H: $2800{-}3000\ \text{cm}^{-1}$, strong; C–O: $1000{-}1300\ \text{cm}^{-1}$, strong; C=O: $1650{-}1750\ \text{cm}^{-1}$, strong.
Q.1. Draw the topological formula of tert-butanol. Circle the characteristic group and name the corresponding functional family.
Starting from concentrated commercial hydrochloric acid at 37 % by mass, a volume $V = 250{,}0\ \text{mL}$ of hydrochloric acid solution S of concentration $C = 2{,}4\ \text{mol}\cdot\text{L}^{-1}$ is prepared.
Q.2. Describe the procedure to prepare solution S, indicating the glassware used from the following list:
- Beakers: 50 mL; 100 mL; 250 mL
- Graduated cylinders: 50 mL; 100 mL; 250 mL; 500 mL
- Volumetric pipettes of 5,0 mL; 10,0 mL; 20,0 mL; 50,0 mL
- Volumetric flasks of 50,0 mL; 100,0 mL; 250,0 mL; 500,0 mL
Synthesis procedure for tert-butyl chloride from tert-butanol:
Step 1: in a 250 mL Erlenmeyer flask, successively introduce a mass $m_A = 5{,}00\ \text{g}$ of tert-butanol, previously melted in a water bath, and a volume $V = 100\ \text{mL}$ of hydrochloric acid S of concentration $C = 2{,}4\ \text{mol}\cdot\text{L}^{-1}$, reagent in excess. Stopper and stir magnetically for 10 minutes.
Step 2: transfer the mixture into a separatory funnel. Carry out a first wash by introducing, into the separatory funnel, 150 mL of an aqueous sodium hydrogencarbonate solution $\mathrm{Na^+(aq) + HCO_3^-(aq)}$. Shake while venting the contents of the funnel, allow the layers to separate, and remove the aqueous phase. Carry out a second wash of the organic phase by adding 25 mL of demineralized water. Shake, allow the layers to separate, and collect the organic phase in a very dry Erlenmeyer flask.
Step 3: dry the organic phase with anhydrous calcium chloride. Filter and collect the filtrate in a 100 mL round-bottom flask. Carry out a distillation in order to collect pure tert-butyl chloride.
Step 4: identify the obtained tert-butyl chloride by infrared spectroscopy.
The first wash, using the aqueous sodium hydrogencarbonate solution, makes it possible to remove oxonium ions.
Q.3. Write the equation of the acid-base reaction that models the chemical transformation occurring in the separatory funnel (step 2) and specify the name of the gas formed.
Q.4. Among the setups below, indicate the one used to purify tert-butyl chloride by distillation.
Proposed diagrams: Setup A: reflux setup, flask heated on a lab jack and vertical water condenser, without receiving vessel. Setup B: Erlenmeyer flask heated in a water bath on a hot plate with stirring, without condenser. Setup C: distillation setup, heated flask, distillation column/head with thermometer, inclined water condenser and collecting graduated cylinder.
Q.5. Figure 1 provides the IR spectra of tert-butanol and tert-butyl chloride. Assign each spectrum to a chemical species, explaining the reasoning.
Figure 1. The IR spectra: two transmittance spectra (in %) as a function of wavenumber $\sigma$ (in cm⁻¹), horizontal axis decreasing from 4000 to 500 cm⁻¹. Spectrum 1: no broad O–H band between 3200 and 3700 cm⁻¹; strong C–H absorption band around 3000 cm⁻¹; numerous marked bands between about 1500 and 500 cm⁻¹, notably near 1450, 1380, 1250, 1150, 750 and 550 cm⁻¹. Spectrum 2: broad and strong band between about 3200 and 3600 cm⁻¹ centered around 3350 cm⁻¹; strong C–H band around 3000 cm⁻¹; strong bands in the 1300–1000 cm⁻¹ region, notably near 1200 cm⁻¹; other bands between 1500 and 500 cm⁻¹.
Q.6. At the end of the distillation, a mass $m = 4{,}45\ \text{g}$ of tert-butyl chloride is collected. Determine the yield of the synthesis.
The candidate is asked to present the method followed even if it did not lead to a result.
⏳ Solution not generated yet
Open this statement in Expert Maths AI: the step-by-step solution is computed on demand, checked by a second resolution, then published here for everyone.
📝 See the solutionHave a similar exercise? Get it solved step by step, for free.
🧮 Solve my exercise