Baccalauréat 2023 — Physics-Chemistry specialty, La Réunion — exercise 1 : Motion of an ink droplet in an inkjet printer (official exam paper)
Statement
Developed in the 1970s, continuous inkjet technology is a non-contact printing process that uses the projection of liquid ink droplets.
Immediately after leaving the nozzle, the ink droplets are electrically charged in a controlled manner (figure 1). They then pass between the plates of a parallel-plate capacitor where an electrostatic field is present. The droplets are then more or less deflected upward to reach the printing sheet.
The droplets that do not correspond to any printable character are not charged, so they undergo no deflection; they are then directed toward the collector and sent back to the cartridges.
Figure 1 : Operation of a continuous inkjet printer. The diagram shows, from left to right, the nozzle that produces the droplets, the electrodes that charge the droplets, a high-voltage parallel-plate capacitor made of two horizontal plates, a collector placed after the capacitor for the undeflected droplets, and the vertical printing sheet on the right. The charged droplets are deflected upward between the plates and then reach the sheet. Source: adapted from “Vous avez dit physique ?” – K. Fadel – Dunod.
PART A: Model of the parallel-plate capacitor
A parallel-plate capacitor, of capacitance $C$, is made of two conductive plates, with identical surface areas $S$, flat and facing each other, parallel to one another. They are separated by a distance $d$ by a dielectric material (figure 2).
The capacitance $C$ depends on the characteristics of the capacitor and we wish to test whether it follows a relation of the form
$C = k \times \frac{S}{d}$ (relation 1)
where $k$ is a constant.
Figure 2 : Model of the parallel-plate capacitor. The diagram shows two parallel plates, called plates of area $S$, separated by a dielectric; the distance between the plates is denoted $d$.
To do this, an electrical setup is carried out in which a variable-capacitance parallel-plate capacitor is subjected to a direct voltage $U = 1{,}50\ \mathrm{V}$ (figure 3).
Figure 3 : Diagram of the electrical circuit used. The circuit includes a direct-voltage generator $U = 1{,}50\ \mathrm{V}$, a switch and a parallel-plate capacitor whose plate area and separation vary.
During a first series of measurements, the distance between the plates is fixed at $d = 5\ \mathrm{mm}$. By varying the plate area $S$, the capacitance $C$ of the capacitor is measured. Using the measurements obtained, the graph in figure 4 is plotted.
A second series of measurements makes it possible to obtain the graph shown in figure 5: the capacitance $C$ of the capacitor is measured by varying the distance $d$ between the plates, their area $S$ being fixed at $S = 200\ \mathrm{mm^2}$.
Figure 4 : Variation of the capacitance of the parallel-plate capacitor as a function of the area of its plates. Graph $C=f(S)$. Vertical axis: $C$ in $\times 10^{-13}$ SI, scaled approximately from 2 to 7. Horizontal axis: $S$ in $\times 10^{-4}\ \mathrm{m^2}$, values from 1 to 4. The experimental points are aligned on an increasing straight line passing approximately through $(1;1{,}75)$, $(1{,}5;2{,}65)$, $(2;3{,}4)$, $(2{,}5;4{,}3)$, $(3;5{,}2)$, $(3{,}5;6{,}1)$ and $(4;7{,}0)$. Indicated slope: $1{,}76 \times 10^{-9}$ SI.
Figure 5 : Variation of the capacitance of the parallel-plate capacitor as a function of the inverse of the distance between its plates. Graph $C=f\left(\frac{1}{d}\right)$. Vertical axis: $C$ in $\times 10^{-13}$ SI, scaled approximately from 2 to 9. Horizontal axis: $\frac{1}{d}$ in $\mathrm{m^{-1}}$, values from about 100 to 500. The experimental points are aligned on an increasing straight line passing approximately through $(100;1{,}7)$, $(115;1{,}9)$, $(130;2{,}1)$, $(150;2{,}4)$, $(170;2{,}9)$, $(200;3{,}5)$, $(250;4{,}4)$, $(335;5{,}8)$ and $(495;8{,}8)$. Indicated slope: $1{,}7 \times 10^{-15}$ SI.
A.1. Give the unit of capacitance of a capacitor in the International System (SI).
A.2. Show that the graphs presented in figures 4 and 5 satisfy relation 1.
PART B: Motion of an electrically charged ink droplet
Data:
• Distance between the plates of the parallel-plate capacitor: $d = 5{,}0\ \mathrm{mm}$.
• Length of the plates: $L = 20\ \mathrm{mm}$.
• Electric charge of the parallel-plate capacitor: $q_C = 1{,}0\ \mathrm{nC}$.
• Distance between the parallel-plate capacitor and the printing sheet: $D = 10\ \mathrm{mm}$.
• Volume of one ink droplet: $V = 1{,}5 \times 10^{-14}\ \mathrm{m^3}$.
• Density of the ink: $\rho = 9{,}5 \times 10^2\ \mathrm{kg\cdot m^{-3}}$.
• Electric charge of one ink droplet: $q = - 2{,}0 \times 10^{-13}\ \mathrm{C}$.
• Magnitude of the Earth's gravitational field: $g = 9{,}8\ \mathrm{m\cdot s^{-2}}$.
• Constant voltage applied between the plates: $U = 3{,}0\ \mathrm{kV}$.
• Initial speed of the ink droplet: $v_0 = 30\ \mathrm{m\cdot s^{-1}}$.
• For a parallel-plate capacitor, the value $E$ of the electrostatic field is related to the voltage $U$ and the distance $d$ separating the plates by the relation: $E = \frac{U}{d}$.
B.1. Trajectory of an electrically charged ink droplet in a uniform electric field
In this part, we study the motion, in the terrestrial frame assumed to be Galilean, of an electrically charged ink droplet assimilated to a material point M between the plates of a parallel-plate capacitor of capacitance $C$. A constant voltage $U$ is applied between the plates.
At time $t = 0$, the droplet arrives at point O with an initial velocity vector $\vec{v_0}$ parallel to the plates of the parallel-plate capacitor (figure 6).
In this study, any type of friction as well as the value of the weight $P$ of the ink droplet will be neglected compared with the value of the electrostatic force $F_e$ exerted on the droplet.
Figure 6 : Trajectory of the electrically charged ink droplet. The diagram shows two horizontal plates of length $L$ separated by a distance $d$; the upper plate is positively charged and the lower one negatively charged. The reference frame has origin O at the entrance of the capacitor, the $x$ axis horizontal to the right, the $y$ axis vertical upward, with unit vectors $\vec{i}$ and $\vec{j}$. The droplet enters at O with a horizontal velocity $\vec{v_0}$ toward the right and follows a curved trajectory upward until the خروج S.
B.1.1. Quantitatively verify that the assumption of neglecting the weight of the droplet compared with the electrostatic force is justified.
B.1.2. Complete the diagram in the APPENDIX TO BE SUBMITTED WITH THE ANSWER SHEET (page 13/13) by drawing, without worrying about scale, the electrostatic field $\vec{E}$ and the electrostatic force $\vec{F_e}$ acting on the ink droplet at point M. Justify the orientation of each vector.
B.1.3. Determine the value of the capacitance $C$ of the parallel-plate capacitor with charge $q_C$ subjected to the voltage $U$.
B.1.4.1. Establish the time equations $x(t)$ and $y(t)$ of the motion of the ink droplet.
B.1.4.2. Deduce that the trajectory of the ink droplet inside the parallel-plate capacitor is written:
$y(x) = - \frac{q \times U}{2 \times m \times d \times v_0^2} \times x^2$
B.1.4.3. Then give the expression of the ordinate $y_S$ of the droplet at the خروج S of the capacitor.
B.2. Impact of the ink droplet on the sheet
At the exit of the parallel-plate capacitor, the ink droplet is subject to no force (its weight is neglected). It then undergoes uniform rectilinear motion until the paper sheet located at the distance $D$ from the parallel-plate capacitor. The impact point of the droplet on the sheet is at ordinate $y = \mathrm{O’Y}$ with O’ located at the center of the sheet. The straight trajectory followed by the droplet makes an angle $\alpha$ with the axis $(Ox)$ and intersects the axis at point I, midpoint of OH (figure 7).
Figure 7 : From the parallel-plate capacitor to the printing sheet. The diagram shows the capacitor again with length $L$ and separation $d$, with the droplet entering at O and leaving at S. After the exit, the trajectory becomes a straight line inclined at an angle $\alpha$ with respect to the horizontal axis, crosses the axis at I, midpoint of OH, then reaches the vertical sheet at point Y. H is the foot of the vertical line through S on the horizontal axis, O’ is on the sheet at the same height as the axis; the horizontal distance between H and O’ is $D$.
B.2.1. Justify that the droplet undergoes uniform rectilinear motion between the parallel-plate capacitor and the sheet.
B.2.2.1. Express $\tan \alpha$ in terms of O’Y and O’I on the one hand and in terms of SH and HI on the other hand.
B.2.2.2. Deduce that the ordinate $Y$ of the impact point of the ink droplet on the sheet has the expression:
$Y = - \frac{q \times U \times L}{m \times d \times v_0^2} \times \left(\frac{L}{2} + D\right)$
B.2.2.3. Determine in which zone of the sheet, that is zone 1, 2 or 3 of figure 8, the droplet will land.
Figure 8 : The different zones of an A4 sheet (the three zones have the same dimensions). The diagram shows a vertical A4 sheet with dimensions 21,0 cm in width and 29,7 cm in height, divided into three equal horizontal bands numbered from top to bottom 1, 2 and 3. The vertical axis $Y$ passes through the center O’ of the sheet, oriented upward.
⏳ Solution not generated yet
Open this statement in Expert Maths AI: the step-by-step solution is computed on demand, checked by a second resolution, then published here for everyone.
📝 See the solutionHave a similar exercise? Get it solved step by step, for free.
🧮 Solve my exercise