Baccalauréat 2023 — Physics-Chemistry specialty, Métropole, Mayotte, Antilles Guyane — exercise 2 : Banana flavor synthesis (official exam paper)
Statement
Banana flavor is a complex mixture of several natural chemical species. The main constituent of this flavor is 3-methylbutyl ethanoate, also called isoamyl acetate: it is used in perfumery and as a food additive.
The aim of this exercise is to compare several protocols allowing this chemical species to be synthesized in the laboratory, in order to determine which synthesis is the most eco-responsible.
A photograph shows a bottle of commercial banana food flavoring.
The reaction equation for the synthesis of 3-methylbutyl ethanoate is as follows: 3-methylbutan-1-ol + ethanoic acid $\rightleftharpoons$ 3-methylbutyl ethanoate + P. In semi-developed formulas: $\mathrm{H_3C-CH(CH_3)-CH_2-CH_2-OH + H_3C-C(=O)-OH \rightleftharpoons H_3C-C(=O)-O-CH_2-CH_2-CH(CH_3)-CH_3 + P}$.
Data:
- infrared spectroscopy data table: O–H bond: wavenumber $3200-3700\ \text{cm}^{-1}$, strong and broad characteristic band shape; C–H bond: $2850-3100\ \text{cm}^{-1}$, strong band; C=C bond: $1620-1680\ \text{cm}^{-1}$, weak and sharp band; C=O bond: $1650-1750\ \text{cm}^{-1}$, strong and sharp band.
1. Identification of the species involved in the reaction
Q1. Draw the skeletal formula of the reactants and of 3-methylbutyl ethanoate. Circle the characteristic groups and identify the corresponding functional families.
Q2. Justify that the product P obtained in this synthesis is water.
Q3. Using the data and justifying each answer, assign spectra A and B shown below either to ethanoic acid or to 3-methylbutyl ethanoate.
Spectrum A: infrared transmittance spectrum (in %) as a function of wavenumber (in $\text{cm}^{-1}$), from 4000 to 500 $\text{cm}^{-1}$. The spectrum shows a very broad absorption band between about 2500 and 3500 $\text{cm}^{-1}$, with a minimum transmittance near 3000 $\text{cm}^{-1}$; a strong sharp band near about 1700 $\text{cm}^{-1}$; several bands between 1500 and 500 $\text{cm}^{-1}$. Vertical axis: transmittance from 0 to 100 %.
Spectrum B: infrared transmittance spectrum (in %) as a function of wavenumber (in $\text{cm}^{-1}$), from 4000 to 500 $\text{cm}^{-1}$. The spectrum does not show a broad O–H band; it shows C–H bands near 3000 $\text{cm}^{-1}$, a strong sharp C=O band near about 1740 $\text{cm}^{-1}$, and several bands in the 1500 to 500 $\text{cm}^{-1}$ range. Source: https://sdbs.db.aist.go.jp/
2. Comparison of synthesis protocols
Data:
- the hydrogencarbonate ion $\mathrm{HCO_3^-}$ is an amphoteric species belonging to the following acid-base couples: $\mathrm{HCO_3^-(aq)/CO_3^{2-}(aq)}$ and $\mathrm{(CO_2(g),H_2O(l))/HCO_3^-(aq)}$;
- physico-chemical data at 20 °C and safety data: table with 5 columns “Chemical species”, “Molar mass in $\text{g}\cdot\text{mol}^{-1}$”, “Density”, “Solubility in salted water”, “Safety pictograms”. 3-methylbutan-1-ol: molar mass 88.2; density 0.81; slightly soluble; pictograms flammable and exclamation mark. Ethanoic acid: molar mass 60.0; density 1.05; very soluble; pictograms flammable and corrosive. 3-methylbutyl ethanoate: molar mass 130.2; density 0.87; very slightly soluble; pictogram exclamation mark. Cyclohexane: molar mass 84.2; density 0.78; insoluble; pictograms exclamation mark, environmental hazard, flammable and serious health hazard.
In the rest of the exercise, three synthesis protocols are compared.
Protocol A: synthesis with a reflux heating setup.
- Step 1: in a flask, 22 mL of 3-methylbutan-1-ol, 15 mL of pure ethanoic acid and 10 drops of concentrated sulfuric acid are introduced, as well as a few grains of boiling chips.
- Step 2: the mixture is heated under reflux for 45 minutes and then cooled to room temperature.
- Step 3: the organic phase is then washed with a saturated aqueous sodium chloride solution and then with an aqueous sodium hydrogencarbonate solution. The organic phase is then dried with anhydrous magnesium sulfate.
- The mass of 3-methylbutyl ethanoate obtained is $m_B = 19,7\ \text{g}$.
Q4. Name steps 2 and 3 of protocol A.
Concentrated sulfuric acid is used as a catalyst in this protocol.
Q5. State the meaning of the word catalyst.
Q6. State the purpose of the reflux heating setup in this protocol.
During the second wash of step 3 in the protocol, gas evolution is observed.
Q7. Using the data, propose an explanation for this observation and justify the usefulness of this step.
Q8. Determine the limiting reactant used in protocol A, then calculate the yield of the synthesis carried out following this protocol.
In protocols B and C, steps 1 and 3 are identical to those of protocol A, but step 2 is modified as indicated below: comparison table. Protocol B: synthesis in a microwave oven; modification of step 2: heating with a power of 800 W for 30 s; yield 87 %. Protocol C: synthesis with a Dean-Stark apparatus; modification of step 2: heating using the Dean-Stark apparatus allowing the water to be removed as it forms, in the presence of cyclohexane acting as the solvent; yield 85 %.
The heating mantle used in protocols A and C during step 2 consumes an energy of $4,1\times10^5\ \text{J}$.
Q9. Calculate the energy used to heat the reaction mixture in protocol B. Comment.
The goal of green chemistry is to reduce the impact of chemistry on human health and the environment. It therefore involves seeking alternative reaction media that are environmentally friendly while at the same time striving to increase rates and lower reaction temperatures. Paul T. Anastas and John C. Warner developed 12 principles of green chemistry in 1991. These principles are divided into two groups: “reduce risk” and “reduce the environmental footprint as much as possible”. Based on https://www.sigmaaldrich.com/
Figure 1. Diagram illustrating some guiding principles of green chemistry: a central circle “Green chemistry” surrounded by six circles indicating “Safer chemicals”, “Less toxic chemical syntheses”, “Energy expenditure limitations”, “Use of catalytic processes”, “Biodegradable products” and “Alternatives to polluting solvents”.
Q10. Using Figure 1, identify, justifying your answer, which protocol best meets the guiding principles of green chemistry.
⏳ Solution not generated yet
Open this statement in Expert Maths AI: the step-by-step solution is computed on demand, checked by a second resolution, then published here for everyone.
📝 See the solutionHave a similar exercise? Get it solved step by step, for free.
🧮 Solve my exercise