Baccalauréat 2023 — Physics-Chemistry specialty, Métropole, Mayotte, Antilles Guyane — exercise 3 : A Formulation of Aspirin (official exam paper)
Statement
Aspirin is the trade name of acetylsalicylic acid. Aspirin has been used since the beginning of the 20th century as an analgesic (pain reliever) and antipyretic (fever reducer) active ingredient. It is still one of the most widely consumed medicines in the world today.
The purpose of this exercise is to study a medicine sachet containing acetylsalicylic acid.
Data:
- excerpt from the instructions for a medicine sachet containing acetylsalicylic acid: Use: 1.0 g dose sachet to be dissolved in water. Active ingredient: acetylsalicylate ion. Composition: 900 mg of DL-lysine acetylsalicylate equivalent to an intake of 500 mg of acetylsalicylic acid.
- by dissolving one sachet of medicine in 40 mL of water, a solution of pH = 5.0 is obtained;
- acid-base pair (acetylsalicylic acid / acetylsalicylate ion): $pK_A = 3.5$ at 25 °C;
- properties of some chemical species: table comparing acetylsalicylic acid and DL-lysine. Acetylsalicylic acid: topological formula described as a benzene ring bearing a carboxylic acid group $-COOH$ and an acetyl ester group $-O-C(=O)-CH_3$; molecular formula $\mathrm{C_9H_8O_4}$; molar mass $180.2\ \text{g}\cdot\text{mol}^{-1}$. DL-lysine: topological formula described as $\mathrm{H_2N-(CH_2)_4-CH(NH_2)-COOH}$; molecular formula $\mathrm{C_6H_{14}N_2O_2}$; molar mass $146.2\ \text{g}\cdot\text{mol}^{-1}$.
- predominance diagram (not to scale) of DL-lysine: horizontal pH axis with thresholds 2.2; 9.2; 10.7. For pH < 2.2, fully protonated form with two ammonium groups and carboxylic acid: $\mathrm{H_3N^+-(CH_2)_4-CH(NH_3^+)-COOH}$. Between 2.2 and 9.2: form with two ammonium groups and carboxylate: $\mathrm{H_3N^+-(CH_2)_4-CH(NH_3^+)-COO^-}$. Between 9.2 and 10.7: form with one neutral amine at the end of the chain, one ammonium on the alpha carbon, and a carboxylate: $\mathrm{H_2N-(CH_2)_4-CH(NH_3^+)-COO^-}$. For pH > 10.7: form with two neutral amines and carboxylate: $\mathrm{H_2N-(CH_2)_4-CH(NH_2)-COO^-}$.
- color wheel: disk indicating approximate colors and wavelengths; violet around 400 nm, blue around 450 nm, green around 500 nm, yellow around 570 nm, orange around 590 nm, red from 630 to 700 nm.
- to decide whether the result of a measurement is consistent with a reference value, use the quotient $\dfrac{|x-x_{\text{ref}}|}{u(x)}$ with $x$ the measured value; $x_{\text{ref}}$ the reference value; and $u(x)$ the standard uncertainty associated with the measured value $x$.
The medicine sachet studied contains aspirin in the form of an ionic compound, DL-lysine acetylsalicylate.
Q1. Represent the semi-developed formula of the acetylsalicylate ion.
Q2. DL-lysine belongs to the family of amino acids. Propose an explanation.
Q3. Indicate the predominant form of the species associated with acetylsalicylic acid and DL-lysine present in the medicine solution obtained after dissolving the contents of the sachet in water.
Q4. Justify then that the acid-base titration of this aqueous medicine solution by a solution of strong acid does not make it possible to directly determine the amount of substance of the acetylsalicylate ion in solution.
We wish to verify the indication “equivalent to an intake of 500 mg of acetylsalicylic acid” given on the medicine instructions. To do this, the following protocol is carried out:
- step 1: place the contents of one sachet in a volumetric flask of volume $V_1 = 250\ \text{mL}$, add 10 mL of a concentrated sodium hydroxide solution, homogenize the mixture and wait 20 minutes, then make up to the mark with distilled water;
- step 2: take a volume $V_2 = 5.0\ \text{mL}$ of this solution, introduce it into a volumetric flask of volume $V_3 = 50.0\ \text{mL}$ and make up to the mark with an acidified iron nitrate solution $\mathrm{(Fe^{3+}(aq) ; 3\ NO_3^-(aq))}$. Let S denote the solution obtained, in which a colored species, denoted B, has been formed.
When implementing this protocol, all the chemical transformations involved are modeled by reactions considered total. Figure 1 shows the simplified steps. The stoichiometric coefficients associated with the species represented are all equal to 1.
Figure 1: simplified steps of the synthesis of the colored species B. Step 1: acetylsalicylic acid, represented by a benzene ring bearing $-COOH$ and an acetyl ester group, undergoes dissolution with excess $\mathrm{HO^-}$ to form the salicylate ion, represented by a benzene ring bearing $\mathrm{-COO^-}$ and $-OH$. Step 2: in the presence of excess $\mathrm{Fe^{3+}}$, the salicylate ion gives the colored species B.
We wish to carry out spectrophotometric determination by calibration of the colored species B obtained at the end of step 2. It is assumed that only species B absorbs in the visible range.
To do this, a stock solution of species B is used, from which 6 standard solutions of known concentrations are prepared by dilution. One of these standard solutions makes it possible to obtain the absorption spectrum given in Figure 2. The absorbance, at the appropriate wavelength $\lambda$, of each standard solution is measured. The results are given in Figure 3.
Figure 2. Absorption spectrum of an aqueous solution of species B at the concentration $1.74\ \text{mmol}\cdot\text{L}^{-1}$: graph of absorbance as a function of wavelength from 400 to 800 nm. The absorbance is about 0.95 at 400 nm, decreases to a minimum of about 0.62 around 425 nm, increases to a maximum of about 1.35 to 1.40 around 525-530 nm, then gradually decreases: about 1.2 around 570 nm, 0.8 around 620 nm, 0.4 around 680 nm, 0.15 around 730 nm, and almost 0 around 800 nm.
Q5. Propose a suitable value for the wavelength for calibration and deduce the color of the solution containing species B.
Figure 3. Absorbance as a function of concentration in species B: graph with the horizontal axis “Concentration in species B ($\text{mmol}\cdot\text{L}^{-1}$)” from 0.0 to 3.5 and the vertical axis “Absorbance” from 0.0 to 2.5. Approximate experimental points aligned: $(0.57 ; 0.46)$, $(1.15 ; 0.92)$, $(1.72 ; 1.34)$, $(2.30 ; 1.78)$ and $(2.88 ; 2.20)$.
The absorbance of solution S obtained from the medicine sachet is measured to be $A = 0.80$.
Q6. Considering that the standard uncertainty associated with the determination of the mass has the value $u(m) = 30\ \text{mg}$, verify whether the equivalent mass $m_{\text{exp}}$ of acetylsalicylic acid present in the sachet is consistent with the information given on the instructions.
The candidate is invited to take initiative and present the approach followed, even if it did not lead to a result. The approach is assessed and must be clearly presented.
⏳ Solution not generated yet
Open this statement in Expert Maths AI: the step-by-step solution is computed on demand, checked by a second resolution, then published here for everyone.
📝 See the solutionHave a similar exercise? Get it solved step by step, for free.
🧮 Solve my exercise