Solved exercises🧮 Solve my exercise

Baccalauréat 2023 — Physics-Chemistry specialty, Polynésie française — exercise 2 : Dorothy Crowfoot, a woman of science (official exam paper)

PhysicsLevel : High schoolDorothy Crowfoot, a woman of science🌐 Lire en français
Statement
Dorothy Crowfoot (1910 - 1994), a British chemist, is the third woman to receive the Nobel Prize in Chemistry in 1964. She was awarded the prize for determining the three-dimensional structure of complex molecules such as insulin. Understanding the geometry of insulin made major advances in the treatment of diabetes possible. Her work built on that of William Lawrence Bragg, who was the first to use X-rays to determine the arrangement of atoms or ions within certain crystals. The aim of this exercise is to study the production of X-rays and then use the phenomenon of interference to determine the distance between two neighboring molecules in a crystal. Production of X-rays. The X-ray tube, whose diagram is shown in figure 1, is a device used to produce X-rays. It contains two metal plates A and B, separated by a distance $d$ and treated as the plates of a parallel-plate capacitor powered by an electric voltage generator G. A heated electric filament by Joule effect produces electrons that are accelerated between the plates. The electrons strike the atoms of plate B and cause the emission of X-rays. Figure 1. Diagram of the X-ray tube: on the left, a heated filament emits electrons near the metal plate A. On the right, the metal plate B receives the electrons and emits X-rays represented by wavy lines. Plates A and B are vertical and connected to a generator G; plate A is at the negative pole, plate B at the positive pole, the voltage is denoted $U$. The uniform electric field $\vec E$ is horizontal and directed to the left, from B to A. The x-axis is horizontal to the right; point O is near plate A and point S is on plate B. In the rest of the exercise, we consider an electron originating from point O with zero initial speed and accelerated to point S on plate B. Given data: - The value of the electric voltage $U$ is 20,0 kV; - The value of the distance $d$ between points O and S is 1,00 cm; - The value of the elementary charge $e$ is $1{,}60\times10^{-19}\ \mathrm{C}$; - The value of the electron mass $m$ is $9{,}11\times10^{-31}\ \mathrm{kg}$; - The relation between the magnitude $E$ of the uniform electric field $\vec E$ (expressed in $\mathrm{V\cdot m^{-1}}$), the electric voltage $U$ (expressed in V), and the distance between the electrodes $d$ (expressed in m) is: $E=\dfrac{U}{d}$; - The value of one electronvolt (eV) is $1{,}60\times10^{-19}\ \mathrm{J}$. Q1. Give the expression for the electric force $\vec F$ experienced by the electron as a function of the elementary charge $e$ and the electric field $\vec E$. On the answer sheet, reproduce the two plates A and B and then draw, without worrying about scale, the electric force $\vec F$ at any point on the axis (Ox) between O and S. Q2. Knowing that the weight of the electron will be neglected and using Newton’s second law, establish the expression for the acceleration vector $\vec a$ of the electron in the frame (O,x). Q3. Show that the expression for the speed $v_x(t)$ is written in the form: $v_x(t)=\dfrac{e\cdot E}{m}\cdot t$ and establish the time equation $x(t)$. Q4. Show that the value of the speed $v_S$ of the electron at point S is equal to $8{,}38\times10^7\ \mathrm{m\cdot s^{-1}}$. At point S, the electron strikes one of the atoms of plate B in order to cause the emission of X-rays. For this to happen, the electron must have a kinetic energy $E_{CS}$ greater than $E_{Cmin}$ with a value equal to $6{,}90\times10^4\ \mathrm{eV}$. Q5. Calculate the value $E_{CS}$ of the electron’s kinetic energy and then verify that this energy is insufficient to produce X-rays. Q6. Choose, justifying your choice, between the two following electric voltage values $U_1=5\ \mathrm{kV}$ and $U_2=70\ \mathrm{kV}$, the electric voltage that would make it possible to increase the value of the electron’s kinetic energy. Determining the distance between two molecules. Dorothy Crowfoot uses X-rays to understand how molecules are arranged within insulin crystals. The molecules that make up the crystal are indicated by black disks in figure 2. The X-rays arrive parallel to one another and are reflected by the molecules. The reflected waves interfere with one another. Figure 2 shows a cross-section of planes passing through the centers of the molecules, separated by a distance $L$. The angle $\theta$ determines the incidence of a parallel beam of X-rays on these planes. Figure 2. Cross-section of a crystal: six molecules are represented by black disks arranged on two horizontal dashed lines, three on the upper line and three on the lower line. The vertical distance between the two horizontal planes is denoted $L$. Two parallel incident X-rays descend obliquely from left to right toward the crystal: incident ray 1 reaches a molecule in the upper plane, incident ray 2 reaches another molecule. Two parallel reflected X-rays rise obliquely toward the right: reflected ray 1 and reflected ray 2. The angles of incidence/reflection with the horizontal plane are denoted $\theta$. Points A, B and C mark intersections on the diagram, point B being on a molecule of the lower plane. A device, not shown in figure 2, makes it possible to superimpose rays 1 and 2 reflected onto a screen. Q7. Using the following figure 3 showing the time evolution of the amplitude of three waves α, β and ε at this point, choose two waves that allow constructive interference and then two waves that allow destructive interference. The time scale is the same on the three graphs. Figure 3. Graphs showing the amplitude of three waves of the same frequency as a function of time: three small graphs side by side, with vertical axis labeled “Amplitude” and horizontal axis $t$. Wave α is sinusoidal, with amplitude about 1, oscillating around 0. Wave β is sinusoidal with the same period but with amplitude about 2; it is phase-shifted relative to α and starts near a negative minimum. Wave ε is sinusoidal with the same frequency and amplitude about 1; it is almost in antiphase with α, starting near a positive maximum when α is near a minimum. The three graphs have the same time scale. Given data: - The optical path difference $\delta$ between the two reflected X-rays shown in figure 2 is $\delta=2\cdot L\cdot \sin\theta$; - If the optical path difference $\delta=k\times\lambda$, with $k$ a nonzero integer, then the interferences are constructive; - The angle of incidence $\theta$ of the X-rays is 10°; - The wavelength $\lambda$ of the X-rays is 0,150 nm; - $1\ \mathrm{nm}=1\times10^{-9}\ \mathrm{m}$. In order for the X-rays to interact with the crystal, the order of magnitude of the distance $L$ must be the same as that of the wavelength $\lambda$ of the X-rays. Q8. Using the previous data, determine the value of the length $L$ in the crystal, in the case where constructive interference is obtained for the smallest possible path difference.
⏳ Solution not generated yet

Open this statement in Expert Maths AI: the step-by-step solution is computed on demand, checked by a second resolution, then published here for everyone.

📝 See the solution

Have a similar exercise? Get it solved step by step, for free.

🧮 Solve my exercise