Solved exercises🧮 Solve my exercise

Baccalauréat 2024 — Physics-Chemistry specialty, Centres étrangers - Groupe 1 (jour 1) — exercise 1 : wine certification (official exam paper)

PhysicsLevel : High schoolwine certification🌐 Lire en français
Statement
Wine is an alcoholic beverage obtained by the fermentation of grapes and must have a minimum mass fraction of 8.5 % alcohol. In the composition of wine, there are more than 600 different substances, but the major chemical species is water. It also contains ethanol, ethanal, and other aromatic compounds produced by fermentation that contribute to the aroma of young wines. Environmental certification approaches are numerous in viticulture. Among them are the organic farming label (AB), Terra Vitis certification, and the Demeter label. One of the criteria to be met in order to obtain these labels concerns the total sulfur dioxide content present in the wine. According to: shop.abacchus.fr/blog-vin/composition-du-vin-les-600-substances/ Nomenclature rules in the case of non-branched-chain compounds: Table 1: number of carbon atoms: 1, 2, 3, 4, 5; corresponding prefix of the carbon-chain name: meth…, eth…, prop…, but…, pent… Table 2: function, characteristic group, nomenclature of the characteristic group. Carboxylic acid: group $-C(=O)-OH$, nomenclature “...oic acid”. Ester: group $-C(=O)-O-R$, nomenclature “...oate of ...yl”. Aldehyde: group $-C(=O)-H$, nomenclature “...al”. 1. Composition of a wine Q.1. Write the semi-developed formula of ethanal. The skeletal formula of a chemical species that contributes to the aroma of wine, other than ethanal, is given below: chain corresponding to $CH_3-CH_2-CH_2-C(=O)-O-CH_2-CH_3$ (an ester group, with a propyl chain on the left attached to the carbonyl carbon and an ethyl group on the right attached to the oxygen). Q.2. Write the semi-developed formula of this molecule. Circle the characteristic group present in this molecule and name the associated functional family. Q.3. Name this molecule. 2. Different forms taken by sulfur dioxide in wine Most winemakers introduce sulfur dioxide into wine. Sulfur dioxide acts as an antiseptic, antioxidant, and fermentation regulator. Winemakers can add it in different ways, but this ultimately amounts to releasing into the solution the $(SO_2,H_2O)$ species, also written $(H_2SO_3(aq))$. Data: - $pK_{A1}(H_2SO_3(aq) / HSO_3^-(aq)) = 1.8$; - $pK_{A2}(HSO_3^-(aq) / SO_3^{2-}(aq)) = 7.2$. Q.4. Write the equation for the reaction modeling the transformation of sulfurous acid $H_2SO_3(aq)$ with water. Q.5. Express the acidity constant $K_{A1}$ associated with this reaction equation. Q.6. Justify the amphoteric character of the chemical species $HSO_3^-(aq)$. Q.7. Draw the predominance diagram for the three species containing the sulfur element. Q.8. Indicate the predominant sulfur-containing species present in a wine whose pH is 3.1. Justify. 3. Colorimetric titration of total sulfur dioxide by a diiodine solution To titrate dissolved sulfur dioxide, a diiodine solution is used. Since the diiodine solution is not very stable, its amount-of-substance concentration in $I_2$ must be checked by a standardization using absorbance measurements. Part 1: checking the concentration of the titrant solution Since the available solution is too concentrated, it is diluted 10 times. The diluted solution is denoted $S_1$. Q.9. Describe the dilution procedure to prepare 100.0 mL of diluted diiodine solution, specifying the glassware used. The absorption spectrum of the diluted diiodine solution $S_1$ is as follows: Figure 1: absorption spectrum of the diluted diiodine solution $S_1$. Vertical axis: absorbance $A$, scaled from 0 to 3.50. Horizontal axis: wavelength $\lambda$ in nm, scaled approximately from 450 to 800 nm. The curve starts at an absorbance close to 2.6 near 400 nm, reaches a maximum of about 3.1 near 475 nm, decreases rapidly to about 1.4 near 520 nm, then decreases more slowly: $A \approx 1.0$ at 550 nm, $A \approx 0.5$ at 600 nm, $A \approx 0.2$ at 650 nm, and tends toward 0 near 800 nm. Q.10. Determine the relevant wavelength at which the absorbance measurements will be carried out by using Figure 1. Justify the choice. Starting from $S_1$, five diiodine standard solutions are prepared. The absorbance of these five solutions is measured and the variation of absorbance as a function of diiodine concentration is plotted. Figure 2: variation of absorbance as a function of diiodine concentration. Horizontal axis: concentration in $mmol\cdot L^{-1}$, from 0 to 1.2. Vertical axis: absorbance, from 0 to 2.00. The experimental points are approximately: $(0.20 ; 0.35)$, $(0.40 ; 0.60)$, $(0.60 ; 0.98)$, $(0.80 ; 1.28)$ and $(1.00 ; 1.62)$. Q.11. Show that the measurements obtained for the diiodine standard solutions can be modeled by the Beer-Lambert law. The absorbance value of the diiodine titrant solution $S_1$ is measured at the wavelength determined in Q.10: $A_1 = 0.80$. Q.12. Determine the amount-of-substance concentration of diiodine in solution $S_1$. Part 2: colorimetric titration of total sulfur dioxide Data: - oxidant/reductant pairs $SO_4^{2-}(aq) / H_2SO_3(aq)$; $I_2(aq) / I^-(aq)$; - molar mass of $H_2SO_3$: $M = 82.1\ g\cdot mol^{-1}$; - criteria to be met concerning the total sulfur dioxide content present in wine for different labels: table. Certification: AB, Terra Vitis, Demeter. Maximum total mass concentration of $SO_2,H_2O$ $(mg\cdot L^{-1})$: AB 150, Terra Vitis 170, Demeter 90. According to INAO inao.gouv.fr; Terra Vitis national federation; demeter.fr Sulfur dioxide is found in different forms in wine. Therefore, the wine is treated so that all of this sulfur dioxide is found in the form $(SO_2,H_2O(aq))$, and the solution $S_2$ to be titrated is obtained. The titration of the total sulfur dioxide contained in $S_2$ is carried out in acidic medium by the solution $S_1$ of known diiodine concentration equal to $c_1 = 5.0 \times 10^{-4}\ mol\cdot L^{-1}$. The reaction-end indicator is starch solution. When all the $(SO_2,H_2O(aq))$ has reacted, diiodine forms a blue-black complex with the starch solution. Titration procedure: - take 10.0 mL of solution $S_2$ and pour it into a beaker; - add a few drops of starch solution to $S_2$; it acts as the color indicator for the reaction end; - titrate using the diiodine solution $S_1$ of concentration $c_1$; - a color change of the starch solution is observed for a delivered titrant volume of $V_e = 9.9\ mL$. Figure 3: diagram of the experimental titration setup. A vertical graduated burette contains the titrant solution and is held by a clamp on a stand; its stopcock is above a beaker placed on a magnetic stirrer. In the beaker are the titrated solution and a magnetic stir bar. The numbers shown are: 1 pointing to the graduated burette, 2 to the stand and clamp, 3 to the magnetic stir bar in the beaker, 4 to the beaker or its contents. Q.13. Match, on your answer sheet, each number (1, 2, 3, 4) in the diagram of the experimental setup with the name of a piece of equipment or a chemical species. Q.14. Show that the reaction equation underlying the titration is: $H_2SO_3(aq) + I_2(aq) + H_2O(\ell) \rightarrow SO_4^{2-}(aq) + 4\ H^+(aq) + 2\ I^-(aq)$ Q.15. Establish the equivalence relationship between the amount of substance $n_E(I_2(aq))$ of diiodine introduced and $n_0(H_2SO_3(aq))$ of sulfur dioxide dissolved in the wine. Q.16. Indicate whether the winemaker may claim to obtain either of these certifications. The candidate is invited to take initiatives and present the approach followed, even if it did not lead to a result. The approach is assessed and must be presented correctly.
⏳ Solution not generated yet

Open this statement in Expert Maths AI: the step-by-step solution is computed on demand, checked by a second resolution, then published here for everyone.

📝 See the solution

Have a similar exercise? Get it solved step by step, for free.

🧮 Solve my exercise