Baccalauréat 2024 — Physics-Chemistry specialty, Centres étrangers - Groupe 1 (jour 1) — exercise 2 : using a laser as a measuring instrument (official exam paper)
Statement
We want to know whether a polyester veil can be used as a mosquito net. To do this, we measure the size of the rectangular mesh openings using a laboratory setup.
1. Verification of the wavelength of the laser
The setup below is carried out with a slide containing a slit of known width.
Figure 1: diffraction setup. A laser beam illuminates a vertical slit of width $a$. A screen is placed at a distance $D$ from the slit. A central bright fringe of width $L$ appears on the screen, measured between the first two minima. The diffraction angle $\theta$ is the angle between the central axis and the direction of the first minimum.
A series of measurements, with a distance $D = (1800 \pm 2)\ mm$, is performed. The results obtained are listed in the following table:
Table: $a$ in $\mu m$: 30, 40, 60, 80, 100, 150, 200. $L$ in mm: 77, 59, 40, 30, 24, 16, 12.
Data:
- small-angle approximations, expressed in radians: $\sin \theta \approx \theta$ and $\tan \theta \approx \theta$;
- theoretical relation between the diffraction angle $\theta$ and the slit width $a$ for small angles: $\theta = \dfrac{\lambda}{a}$;
- agreement of a measurement with a reference value: if applicable, one compares the result of a measurement $X$ with a reference value $X_{réf}$ using the quotient $\left|\dfrac{x-x_{réf}}{u(x)}\right|$ where $u(X)$ is the standard uncertainty associated with the result.
Q.1. Using Figure 1, express the diffraction angle $\theta$ as a function of the width $L$ of the central bright fringe and the distance $D$.
Using a spreadsheet and the previous relation, the following table is obtained:
Table: $1/a$ in $m^{-1}$: $3,33\cdot 10^4$, $2,50\cdot 10^4$, $1,67\cdot 10^4$, $1,25\cdot 10^4$, $1,00\cdot 10^4$, $6,67\cdot 10^3$, $5,00\cdot 10^3$. $\theta$ in rad: $2,14\cdot 10^{-2}$, $1,64\cdot 10^{-2}$, $1,11\cdot 10^{-2}$, $8,33\cdot 10^{-3}$, $6,67\cdot 10^{-3}$, $4,44\cdot 10^{-3}$, $3,33\cdot 10^{-3}$.
A script written in Python is then used to plot $\theta = f(1/a)$. Figures 2 and 3 below are obtained, in which $\theta$ will be written as theta and $1/a$ will be written as inv_a:
Figure 2: plot of $\theta = f(1/a)$. Horizontal axis: inv_a in $m^{-1}$, from 0 to about $3,6\times 10^4$. Vertical axis: theta in rad, from 0 to about 0,024. The experimental points are aligned; a model line passes through the origin and through the points.
Figure 3: output from the Python console. The console displays: “Slope value k = 6.41e-07 m” then “Standard uncertainty on the slope u(k) = 5.7e-09 m”. Data: $6,41e{-}07 = 6,41\times 10^{-7}$.
Q.2. Deduce from the previous information the value of the wavelength $\lambda_{laser}$ of the laser used. Justify.
Q.3. Indicate whether the measured value is consistent with the wavelength $\lambda_{réf} = 650\ nm$ indicated in the manufacturer’s instruction manual.
2. Measuring the size of a rectangular mesh opening in a polyester veil
The aim of this part is to measure the dimensions $b$ and $b’$ of the available polyester veil whose mesh is represented in the following figure:
Figure 4: diagram of the veil mesh. A rectangular grid is shown. $b$ denotes the horizontal distance between the centers of two consecutive holes in the mesh; $b’$ denotes the vertical distance between the centers of two consecutive holes.
An interference experiment is carried out to evaluate these dimensions using the previous laser diode and the following setup:
Figure 5: setup used (not to scale). A laser illuminates a veil with a rectangular mesh. A screen placed at the distance $D’ = 6,17\ m$ from the veil receives the interference pattern, reproduced in Figure 6.
Data:
- laser diode with wavelength $\lambda = (650 \pm 20)\ nm$ where what follows the $\pm$ sign represents the standard uncertainty associated with the wavelength;
- distance $D’ = (6,17 \pm 0,03)\ m$ where what follows the $\pm$ sign represents the standard uncertainty associated with the distance;
- let $b$ be the distance between the centers of two consecutive holes in the horizontal mesh and $b’$ the distance between the centers of two consecutive holes in the vertical mesh of the veil;
- the interference pattern obtained is given in the following figure.
Figure 6: interference pattern obtained with the veil. On a black background appears a red luminous pattern made up of spots aligned horizontally and vertically around a central spot. A yellow horizontal arrow, 45 mm long, joins two symmetrical bright spots on the horizontal axis and spans 6 intervals between successive spots. A green vertical arrow, 18 mm long, joins two bright spots on either side of the central spot on the vertical axis and spans 2 intervals between successive spots.
- the horizontal fringe spacing, denoted $i$, is defined as the distance between the centers of two successive bright spots along the horizontal axis identified in Figure 6;
- the vertical fringe spacing, denoted $i’$, is defined as the distance between the centers of two successive bright spots along the vertical axis identified in Figure 6;
- the fringe spacing is given by the relation: $i = \dfrac{\lambda \times D’}{b}$ and $i’ = \dfrac{\lambda \times D’}{b’}$;
- the standard uncertainty $u(b)$ on the quantity $b$ can be calculated using the relation:
$\dfrac{u(b)}{b} = \sqrt{\left(\dfrac{u(D’)}{D’}\right)^2 + \left(\dfrac{u(i)}{i}\right)^2 + \left(\dfrac{u(\lambda)}{\lambda}\right)^2}$
where $u(x)$ denotes the standard uncertainty associated with the quantity $x$.
Q.4. Evaluate the fringe spacings, $i$ and $i’$, using the dimensions shown in Figure 6.
Q.5. Deduce the values of the dimensions $b$ and $b’$ of the veil used, as well as their associated uncertainties, considering the standard uncertainties on $i$ and $i’$: $u(i) = u(i’) = 0,1\ mm$. Write the results with an appropriate number of significant figures.
Q.6. Explain why the distance $D$ used in the setup of part 1 had to be replaced by a distance $D’$ to carry out the measurement in part 2.
According to the recommendations of ECARF (European Foundation for Allergy Research), an anti-pollen mosquito net must have at least 3 times more openings per $cm^2$ than a standard mosquito net, which has 50 per $cm^2$.
Q.7. Estimate the number of openings per $cm^2$ of the tested polyester veil. State whether it can be used as an anti-pollen mosquito net according to ECARF.
The candidate is invited to take initiative and present their approach. Any relevant approach, even if incomplete, will be credited.
⏳ Solution not generated yet
Open this statement in Expert Maths AI: the step-by-step solution is computed on demand, checked by a second resolution, then published here for everyone.
📝 See the solutionHave a similar exercise? Get it solved step by step, for free.
🧮 Solve my exercise